2009 FIAT CROMA radio

19
INSTANT NAV
– by activating the PTY function;
– by selecting a radio station or music
track from a list;
– by selecting the SCM, RDM or RPT
function (the latter is only available in CD
MP3 mode);
– by selecting the PRG function (in CD
mode only). This Menu makes it possible to adjust the
audio settings for the radio, the CD, the
Media Player (if connected) and the au-
dio adjustments for the speakers.
Pressing the MUSIC button activates the
display of information for the audio source
being listened to. Pressing the OK but-
ton/knob gives access to the specific au-
dio source menu being listened to. Press-
ing the
&button briefly activates the
“Mute” function.
VOLUME ADJUSTMENT
To adjust the volume, turn the knob
1-fig.1. The volume can be adjusted to a
maximum level of 40. When the system is
turned off and then turned back on, the
volume will be set at a level of 20.
With the MUTE function, when the knob
1- fig. 1 is turned, the MUTE function is
deactivated.MUTE/PAUSE FUNCTION
To activate the Mute/Pause function,
press the
&button or the &/ESCbut-
ton on the steering wheel briefly.
The Mute/Pause function is deactivated
in the following cases:
– by pressing the MEDIA button;
– by pressing the RADIO button;
– by pressing the PRESET button (in ra-
dio mode only);
– by pressing the
Obutton;
– by pressing the
N/O/
/buttons;
– by pressing the SRC or
N/Obutton
on the steering wheel;
– by opening the Audio adjustments
Menu in the main menu;
– by searching manually for a radio sta-
tion frequency;
A A
U U
D D
I I
O O
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 19

21
INSTANT NAV
Speed-volume adjustment
(speed dependent volume
adjustment)
This function allows the volume level to
be adjusted depending on the speed of the
vehicle, to maintain the correct balance
with the noise level inside the passenger
compartment.
Turn the OK button/knob to acti-
vate/deactivate the function.Equalization
This function makes it possible to select
one of the following equalizer curves:
– None (predefined car curve)
– Pop/Rock
– Classical
– Techno
– Jazz
– Vocal
Turn the OK button/knob to select the
desired adjustment.AUDIO SOURCE SELECTION
Alternatively, by pressing the MEDIA
button it is possible to select the CD
source (only if a CD is inserted) or the
Media Player (only if the Blue&Me
TMsys-
tem is present and a USB device with mu-
sic files is inserted). In this case, pressing
the RADIO button selects the radio mode
and subsequent presses give the possibil-
ity of selecting the preferred radio band.
Pressing the SRC button on the steering
wheel selects one of the audio sources
available.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 21

22
INSTANT NAV
RADIO FUNCTIONS
With the radio source activated, press-
ing the RADIO button repeatedly selects
one of the following frequency bands:
FM1, FM2, FM
AST, AM.
After having selected the desired fre-
quency, the display will show the follow-
ing information fig. 6:
– radio symbol
– radio station name
– frequency of the station tuned into
– number corresponding to the stored
position;
– frequency band activated (e.g.: FM1);
– programme name and typeRADIO STATION TUNING
Press the
N/O/
/buttons or theN/Obuttons on the steering wheel to
search for a radio station. It is also possi-
ble to select a radio station from a list or
by entering the frequency from the spe-
cific menu.
Manual tuning
This allows the manual search for sta-
tions on the desired band. Press the
N/Obutton briefly and repeatedly to
start the search in the desired direction.
If the
N/Obutton is pressed longer, the
fast search will start and then stop when
the button is released.
Automatic tuning
Press the

or button briefly to au-
tomatically tune into the next station in
the selected direction. If the

or but-
ton is pressed for longer, the rapid search
is launched. When the button is released,
the tuning will stop at the next station that
can be received.Radio stations list selection
Two different lists of radio stations can
be selected: one for the FM band and one
for the AM band. The system continuously
updates the list; it is possible to request
a list update by pressing button
h for a
while.
If reception is not ideal, the automatic
update is less frequent, therefore the list
may appear different after a manual up-
date.
To access the list of radio stations, press
button
h briefly.
The list of stations displays the name of
the station (if available) or the frequency.
The TMC indication is also displayed if the
FM station provides this service.
fig. 6F0L5040g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 22

23
INSTANT NAV
Radio station selection
Up to 6 different radio stations can be
stored for each frequency band (FM1,
FM2, FM
AST, AM). They can be recalled by
pressing the PRESET button briefly.
After having pressed the PRESET button,
the display will show the list of 6 radio sta-
tions stored (fig. 7). Select the desired sta-
tion using the OK button/knob.RADIO STATION
PROGRAMMING
Up to 6 different radio stations can be
stored for each frequency band (FM1,
FM2, FMAST, AM). The programming can
be carried out manually for the FM1, FM2
and AM bands and automatically for the
FM
ASTband (AutoSTore).
Radio station manual
programming
After having selected the desired fre-
quency, press the PRESET button for a
while. The display will show the list of 6
positions available with information on the
stations currently stored and will allow the
user to store the station.AutoSTore function (automatic
radio station programming)
The AutoSTore function is only available
on the FM frequency band. To activate the
function, press the RADIO button for a
while or access the specific menu or the
radio main menu. The system will search
for and programme the 6 radio stations
with the strongest signal.
When the programming is over, the ra-
dio will tune into the first station stored
on the FM
ASTfrequency band.
Each station is only stored once, except
in the case of regional programmes which,
in some cases, may be stored twice.
fig. 7F0L5012g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 23

24
INSTANT NAV
IMPORTANT NOTES
– The AutoSTore function cannot be ac-
tivated with the PTY fuction activated.
– The AF, TA and REG functions are not
available with the AutoSTore function ac-
tivation.
– To interrupt the AutoSTore function,
select another source (CD or Media Play-
er).
– It is possible that sometimes the Au-
toSTore function does not manage to find
6 stations with a strong signal; in this case
only the stations found will be pro-
grammed.
– When the AutoSTore function is ac-
tivated, the stations that were previously
stored on the FM
ASTband are deleted.TA FUNCTION
(traffic information)
Some stations on the FM band can trans-
mit information about traffic conditions.
To activate/deactivate the function, see
the “Specific radio menu” paragraph.
With the TA function activated the vol-
ume can be changed by turning the OK
button/knob. When the volume is changed
during a traffic bulletin, the new value will
only be maintained whilst the bulletin is in
progress.
IMPORTANTIn some countries there
are radio stations that do not broadcast
traffic information even with the TA func-
tion activated.PTY FUNCTION
(programme type selection)
This function makes it possible to give
priority to listening to radio stations that
broadcast programmes classified accord-
ing to the type of PTY. The PTY pro-
grammes may involve emergency mes-
sages or various subjects (e.g. music,
news). To activate/deactivate the function,
see the Specific radio menu paragraph.
IMPORTANTTo activate the PTY
function you must be on the FM band.
If you do not wish to set any programme,
select “None”.
The PTY function cannot be activated if
a PTY search has already been launched
or if the AutoSTore function is activated.
The PTY search is interrupted in the fol-
lowing cases:

– recalling a radio station programmed
or programming a radio station;
– by pressing the RADIO, MEDIA,
NorObuttons.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 24

25
INSTANT NAV
AF FUNCTION
(alternative frequency search)
Alternative frequencies are used for au-
tomatically changing frequency when the
signal for the radio station activated is not
strong enough. To activate/deactivate the
function, see the “Specific radio menu”
paragraph.
REG FUNCTION
This function enables or disables a re-
gional RDS service. To activate/deactivate
the function, see the Specific radio menu
paragraph. The function cannot be select-
ed if the AutoSTore function is activated.SPECIFIC RADIO MENU
With the radio function activated it is
possible to access the Specific radio menu
by pressing the OK button/knob. The dis-
play will show the following screen (fig. 8).
Radio stations list
See the description in the “Radio station
selection” paragraph.
Insert frequency
By selecting this item it is possible to en-
ter the radio station frequency. The dis-
play will show the field and the frequen-
cy value plus the dimension (KHz for AM
band, MHz for FM band).Radio options
By selecting this item it is possible to ac-
tivate/deactivate the following functions:
AF, TA, REG, RADIOTEXT. It is also pos-
sible to select the PTY function and
AutoSTore.
Audio settings
See the description in the Audio adjust-
ments menu paragraph available in the
Audio menu.
fig. 8F0L5023g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 25

39
INSTANT NAV
NAVIGATION OPTIONS
This makes it possible to change the fol-
lowing navigation parameters (fig. 25):
– “Set up calculation criteria”
– “Voice message volume”
– “Map information”
– “Delete last destinations” Set up calculation criteria
This makes it possible to select the fol-
lowing navigation parameters:
– “Quickest route”: the quickest route
for reaching the destination is displayed.
– “Shortest route”: the shortest route
for reaching the destination is displayed.
– “Distance/time”: this is the “average”
of the two previous items.
– “With tolls”: it is possible to define
whether or not the route should include
motorways.
– “With ferries”: it is possible to define
whether or not the route should include
ferries.
– “Traffic info (TMC)”: it is possible to
define whether the route should take in-
to account traffic information received
from the radio via the RDS-TMC/TMC
Premium service.Voice message volume
The voice instructions given by the sys-
tem guide you to the destination recom-
mending all the manoeuvres to be carried
out: the manoeuvre is announced first and
then detailed instructions are given.
By selecting the “Voice message volume”
item it is possible to adjust the volume of
these instructions.
Map information
This makes it possible to show the ver-
sion of the map on the display.
Delete last destinations
This makes it possible to delete the last
destinations entered. Select “Yes” or
“No”.
fig. 25F0L5019g
RIVOLI
TORINO
5km
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 39

41
INSTANT NAV
SPECIFIC NAVIGATION MENU
It is possible to access the specific menu
from the Navigation application (by press-
ing the NAV button). The Menu displays
the following information fig. 28:
– “Select destination”
– “Full screen map/map with pictograms”
– “Resume/stop navigation”
– “Traffic info (TMC)”
– “Navigation options”
– “Explore map”. Select destination
See the description in the "Select desti-
nation" paragraph.
Full screen map/map with
navigation information
This makes it possible to move from the
full screen display of the map to a partial
display with navigation information and
vice versa.
Resume/stop navigation
This allows the navigation to be stopped/
resumed. Traffic Info (TMC/TMC Premium)
See the description in the “Traffic Info”
chapter.
CAUTION Traffic information can be
displayed only if the radio station
sets/sends messages next to the stated
point or along the route if a destination
has been entered.
Navigation options
See the description on previous pages.
Explore map
See the description on previous pages.
fig. 28F0L5403g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 41