2009 FIAT CROMA turn signal

16
INSTANT NAV
SWITCHING THE SYSTEM
ON/OFF
The system is switched on by turning the
ignition key to the MAR position and
switches off when the ignition key is
turned to the STOP position.
The system can always be turned on/off
by pressing the (ON/OFF) button 1- fig. 1.
If the system is turned on with the en-
gine switched off, it will automatically
switch off after about 20 minutes.
Dark mode (display dark)
With the system on, if the (ON/OFF)
button 1 - fig. 1 is pressed briefly, the
DARK mode is activated: the display will
go out, but the system remains on and
working.MAIN FUNCTIONS
The Instant Nav features four applica-
tions (Audio, Telephone, Trip Computer
and Navigation) and a general menu. The
four applications are activated by pressing
the MUSIC, TEL, TRIP, NAV buttons.
Press the MENU button to activate the
Menu.
NOTE The Telephone application is only
present with the Blue&Me
TMsystem.
All the applications have a specific Menu
that can be activated by pressing the OK
button/knob.The system also signals the following by
means of messages in the display:
– the presence of any problems/faults;
– information on the application activat-
ed/information on the status of the car.
To interact with the messages displayed,
use the OK button/knob or press button
Nto remove the message from the dis-
play.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 16

24
INSTANT NAV
IMPORTANT NOTES
– The AutoSTore function cannot be ac-
tivated with the PTY fuction activated.
– The AF, TA and REG functions are not
available with the AutoSTore function ac-
tivation.
– To interrupt the AutoSTore function,
select another source (CD or Media Play-
er).
– It is possible that sometimes the Au-
toSTore function does not manage to find
6 stations with a strong signal; in this case
only the stations found will be pro-
grammed.
– When the AutoSTore function is ac-
tivated, the stations that were previously
stored on the FM
ASTband are deleted.TA FUNCTION
(traffic information)
Some stations on the FM band can trans-
mit information about traffic conditions.
To activate/deactivate the function, see
the “Specific radio menu” paragraph.
With the TA function activated the vol-
ume can be changed by turning the OK
button/knob. When the volume is changed
during a traffic bulletin, the new value will
only be maintained whilst the bulletin is in
progress.
IMPORTANTIn some countries there
are radio stations that do not broadcast
traffic information even with the TA func-
tion activated.PTY FUNCTION
(programme type selection)
This function makes it possible to give
priority to listening to radio stations that
broadcast programmes classified accord-
ing to the type of PTY. The PTY pro-
grammes may involve emergency mes-
sages or various subjects (e.g. music,
news). To activate/deactivate the function,
see the Specific radio menu paragraph.
IMPORTANTTo activate the PTY
function you must be on the FM band.
If you do not wish to set any programme,
select “None”.
The PTY function cannot be activated if
a PTY search has already been launched
or if the AutoSTore function is activated.
The PTY search is interrupted in the fol-
lowing cases:

– recalling a radio station programmed
or programming a radio station;
– by pressing the RADIO, MEDIA,
NorObuttons.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 24

30
INSTANT NAV
The Navigator makes it possible to reach
a desired destination through visual and
acoustic directions. The Navigation sys-
tem is quick to use, easy and, above all,
very flexible because you can recall pre-
ferred destinations and reference points
such as hotels, monuments, public build-
ings (e.g. hospitals, airports, etc.) and fill-
ing stations.IMPORTANT NOTES
The Navigation system provides assis-
tance whilst driving and is designed to give
advice, via voice and graphic information,
on the best route for reaching a desired
destination. The instructions given by the
Instant Nav do not mean that the driver
should abdicate responsibility for the ma-
noeuvres they make whilst driving the car
in traffic and they must still follow the high-
way code and other traffic laws. The dri-
ver is always responsible for road safety.
GPS reception may be poor under trees,
between tall buildings, in multi-storey car
parks, tunnels and anywhere where the
satellite area may have difficulty picking up
a signal.
If the battery is replaced or disconnect-
ed or if the car is moved with the engine
and the Instant Nav off (e.g. whilst travel-
ling on a ferry), the GPS system needs a
few minutes to determine the new posi-
tion of the car.The GPS satellite aerial should not be
covered by metal or damp objects.
In conditions where wheel grip is con-
tinuously bad (e.g. when sliding on ice), the
Navigation system may temporarily show
an inaccurate position for the car.
When the system is turned on, when the
first navigation function selection is made,
the display will show a message with warn-
ings for using the system. This message will
not be displayed until the next time it is
started up.
N N
A A
V V
I I
G G
A A
T T
I I
O O
N N
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 30

51
INSTANT NAV
Measures (temperature/distance/
consumption)
Select the item “Measures” by turning
the OK button/knob and then press the
actual knob to confirm.
The display will show the following
screen (fig. 35).
Select the desired unit of measurement.
Turn the OK button/knob, select OK and
then press the actual knob to confirm.
NOTE The selection of the unit of mea-
surement for the temperature is only
available if the outside temperature sen-
sor is present.SOUNDS
This makes it possible to adjust the vol-
ume of the voice messages, the instrument
panel buzzer and the buttons buzzer in the
car (fig. 36).
“Voice message volume”
(Voice message volume
adjustment)
Select the item and adjust the volume by
turning the OK button/knob and then
press the actual knob to confirm.
There are 40 levels for the volume ad-
justment.“Warnings volume”
(Adjustment of instrument panel
buzzer volume)
Adjustment of the volume for signals for
any warnings supplied by the instrument
panel.
This adjustment can only be made with
the ignition key in the MAR position.
There are 7 levels for the volume ad-
justment.
“Buttons volume”
(Adjustment of buttons buzzer
volume)
This adjustment can only be made with
the ignition key in the MAR position.
There are 7 levels for the volume ad-
justment.
fig. 35F0L5005gfig. 36F0L5016g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 51

52
INSTANT NAV
“MY CAR” OPTIONS
This allows a series of parameters and
operating modes to be set for the car (fig.
37).
Select the desired item by turning the
OK button/knob and then press the actual
knob to confirm.
These adjustments can only be made
with the ignition key in the MAR position.Speed warning
By selecting this item it is possible to set
the car’s speed limit (fig. 38).
Turn the OK button/knob to alter the
speed limit value set in steps of 5 km/h (or
mph depending on the unit of measure-
ment for the distance set).
If the
Nbutton is pressed or after
about 30 seconds if no selection is made,
the screen will disappear from the display.
The “Signalling active” function activates/
deactivates the signalling when the set
speed limit is exceeded.Key
Select this item to independently open
the driver’s door and/or the boot:
– OPEN DOORS: when activated, the
unlock command unlocks all the doors ex-
cept for the boot
– OPEN DRIVER’S: when activated, the
unlock command unlocks the driver’s
door only
– OPEN ALL: when activated, the unlock
command unlocks all the doors including
the boot.
Select the desired item by turning the
OK button/knob and then press the actual
knob to confirm.
Autoclose
By selecting this item it is possible to ac-
tivate/deactivate the central locking of the
doors.
The doors are automatically locked
when the function is active and the car
reaches a speed of 20 km/h.
fig. 37F0L5017gfig. 38F0L5048g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 52

54
INSTANT NAV
DATE & TIME
This allows the date and the time to be
changed (fig. 39).
Adjust the Day/Month/Year/Time by
turning the OK button/knob and then
press the actual knob to confirm.
There are two modes for the display of
the time: 12h or 24h.
By selecting the item “GPS time” it is al-
so possible to activate/deactivate the au-
tomatic synchronization of the GPS sig-
nal minutes. This adjustment is only pos-
sible if the GPS signal is available.LANGUAGE
This makes it possible to change the lan-
guage in which the messages are shown
on the display and the voice messages.
There is a choice from the following lan-
guages: French, English, Italian, Spanish,
Polish, German, Dutch and Portuguese.
After having selected the language the
following message will be displayed:
– by selecting “YES” the language will be
changed: in this case the display will show
the message “Reboot...” and then when
it is turned back on the messages/voice
commands will be in the new language;
– by selecting “NO” the language will not
be changed.
If, on the other hand, no selection is
made, the system will automatically return
to the configuration menu.SD CARD MANAGEMENT
The system uses the SD Card support
containing the navigation maps.
IMPORTANTOnly original SDs or
ones compatible with SPI technology can
be used.
Inserting the SD Card
Insert the SD Card in the slot 9 - fig. 1:
the display will show a warning message.
IMPORTANTIf the SD Card is dam-
aged or cannot be read, the display will
show a dedicated warning message. If but-
ton
Nis pressed or about 30 seconds
elapse, the message will disappear from
the display.
fig. 39F0L5004g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 54

56
INSTANT NAV
The Instant Nav is capable of detecting
and solving both operating faults within the
system and overheating problems.OPERATING FAULTS
If an internal fault is detected, the system
“freezes” the last screen available and
launches a diagnostic search.
The system checks the module con-
cerned for a few moments to detect the
type of fault; if the preset time is exceed-
ed and the fault persists, the best solu-
tion is adopted (for example, resetting the
hardware for the module involved).
If the Instant Nav no longer responds to
the commands, it is possible to restart it
manually by pressing the
Nbutton for
more than 8 seconds.PROBLEMS DUE TO
OVERHEATING
If the temperature of a Instant Nav hard-
ware module (audio, CD player, etc.) ex-
ceeds the maximum set limit, the module
signals that the temperature is too high;
the display will show a dedicated message.
The module involved is automatically
limited or disabled. In extreme cases the
system is automatically turned off until
normal operating temperature is resumed;
the display shows a dedicated message.
The system will only return to normal
operation when the temperature operat-
ing conditions are normal once again.
O O
P P
E E
R R
A A
T T
I I
N N
G G
P P
R R
O O
B B
L L
E E
M M
S S
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 56