2009 FIAT CROMA phone

15
BLUE&ME
™
in conjunction with Instant Nav
To start using the system hands free
function with voice recognition and Blue-
tooth
®techonolgy:
– Prepare the phone directory in your
mobile phone
– Make sure that the ignition key is in
the MAR position
– Practise the voice commands
– Register your mobile phone
– Make a call.
The instructions for each of these
functions are given in the paragraphs that
follow.
H H
A A
N N
D D
S S

F F
R R
E E
E E

Q Q
U U
I I
C C
K K

G G
U U
I I
D D
E E
PREPARE THE DIRECTORY IN
YOUR MOBILE PHONE
Before registering your mobile phone on
the system, you must make sure you have
stored your contact names in the phone
directory in your mobile so that you can
call them using the car hands free system.
If your phone book does not contain
any names, enter the new names for the
phone numbers that you call the most of-
ten. For further information on this op-
eration, consult your mobile phone man-
ual.
For the best use of the car hands free
system, refer to the suggestions for how
to store the names in your mobile phone
directory in the chapter mobile TELE-
PHONE SETTING - REGISTRATION
FUNCTIONS. IMPORTANT NOTES
– Access to the directory copied onto
the system is only possible when the mo-
bile phone from which it has been copied
is connected.
– The names stored on the SIM card or
in your mobile phone memory can be
transferred onto the system in a different
way depending on the model of mobile
phone.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 15

16
BLUE&ME
™
in conjunction with Instant Nav
BEING FAMILIAR WITH THE
VOICE COMMANDS
Whilst conversing with the system you
can simply use the voice command “Help”
for detailed instructions on the voice com-
mands available at all stages.
To practise the “Help” command, pro-
ceed as follows:
– Press the
‘control on the steering
wheel.
– After the system has given an acoustic
signal to indicate that the voice recogni-
tion is activated, say “Help”. The system
will give the list of voice commands avail-
able.
– At the end of the help message, say
“Settings” and, at the end of the message,
“Help”. The system will give the list of
voice commands available for the Settings
menu.
– You can now say one of the com-
mands available and proceed with the di-
alogue as you wish.
– If you need further help press
‘and
say “Help”.REGISTERING YOUR MOBILE
PHONE
IMPORTANT This operation should on-
ly be carried out with the car stationary.
To register your mobile phone, proceed
as follows:
– Press
‘and say “Settings” and then,
at the end of the message from the sys-
tem say “Register user”.
– The system will show a PIN number
on the panel multifunction display to be
used for the registration. Consult your
mobile phone manual for the next two
stages looking at the chapters on regis-
tering and connecting mobile phones with
Bluetooth
®.
– Look for devices with Bluetooth
®on
your mobile phone (the setting on your
mobile phone may be called Discover or
New Device). Find “Blue&Me” in this list
(the name that identifies the system for
your car): select it.
– When the mobile phone asks for it,
enter the PIN number shown in the pan-
el display using your mobile phone keypad.
If the registration has been successful, the
system will say “Connection in progress”
and at the end will show the number of
the mobile phone registered on the dis-
play as confirmation.It is important to wait for this confirma-
tion message, if you press
ßor ESCbe-
fore this message appears you risk can-
celling the registration process. If the reg-
istration fails, an error message will ap-
pear: in this case the procedure will have
to be repeated.
– After registering your mobile phone,
the first time you connect the system will
say “Welcome”. During subsequent reg-
istration procedures or connections with
the same telephone, this message will no
longer be given.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 16

17
BLUE&ME
™
in conjunction with Instant Nav
If you have several phone numbers for
Mario, but there is no indication of what
type the number is, the display will show
the name on the display together with the
list of phone numbers. The hands free sys-
tem will ask you if you want to call the
phone number displayed. If the number
displayed is the one you want to call, say
“Yes”, otherwise say “No”. If the person
is the one you want to contact, but the
number is wrong, say “Forward” or “Back-
ward” to see the other phone numbers
listed for this person.
To call the number displayed, say “Call”.
You can also navigate through this list
manually by pressing the controls on the
steering wheel
QorZuntil you find the
number you want. At this point, press
ßor OKto make the call.
– To end the call, press
ßfor more than
1 second.
If you have any difficulties using the
car’s hands free system, consult the
PROBLEM SOLVING - HANDS FREE
chapter. – The system will ask you if you want to
copy the phone directory for the mobile
phone you have just registered. It will
suggest copying the directory. To proceed
with the copying, say “Yes” or not to copy
the directory, say “No”.
– On some compatible mobile phones
the names in the directory are not copied
automatically, but have to be transferred
by the user using the mobile phone key-
pad. If the system asks you, carry out this
procedure following the specific instruc-
tions in your mobile phone and press
ßwhen you have finished. MAKING A CALL
Imagine that “Mario” is one of the names
stored in your directory.
To make a call to Mario, proceed as fol-
lows:
– Press the
‘control on the steering
wheel and say “Call Mario”.
– If the system recognizes the name
Mario the relevant information will be
shown on the display.
If there is only one phone number for
Mario saved in your phone list, the system
will ask you directly if you want to call
Mario. To make the call, say “Yes”, oth-
erwise say “No”.
If, on the other hand there are several
phone numbers for Mario, the system will
ask which one you wish to call (for ex-
ample, “Call Mario work or home?”). An-
swer giving the type of phone number you
wish to call (e.g., “Home”).
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 17

19
BLUE&ME
™
in conjunction with Instant Nav
If your Bluetooth®phone supports this
function, when you receive a new SMS
text message, the system will notify you
through an acoustic signal and ask if you
want to read it.
– say “Yes” or press the
ßor OKbut-
ton and the system will read the last mes-
sage received
– say “No” or press the ESCbutton
and the system will store the message and
you can read it another time
S S
M M
S S

T T
E E
X X
T T

M M
E E
S S
S S
A A
G G
E E

R R
E E
A A
D D
E E
R R

Q Q
U U
I I
C C
K K

G G
U U
I I
D D
E E
( (
o o
n n
l l
y y

w w
i i
t t
h h

c c
o o
m m
p p
a
a
t t
i i
b b
l l
e e

m m
o o
b b
i i
l l
e e

p p
h h
o o
n n
e e
s s
) )
To get familiar with all the functions and
the capabilities of the SMS message read-
er, refer to the “SMS TEXT MESSAGE
READER FUNCTIONS” chapter.
If you have any difficulties using the
SMS text message reader, consult the
“PROBLEM SOLVING - SMS TEXT MES-
SAGE READER” chapter.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 19

23
BLUE&ME
™
in conjunction with Instant Nav
CONTROLS ON THE STEERING
WHEEL
The controls on the steering wheel (see
fig.1) are designed to use the hands free
function, activate the voice recognition,
the multimedia player functions or to se-
lect an option from the system Menu.
Other controls have different functions
depending on the system status at any giv-
en moment.
The function selected in response to
pressing a button in some cases depends
on how long the button is pressed (long
or short press).
DISPLAY AND CONTROLS ON
THE STEERING WHEEL.
Note
The instructions for using the system via
the manual controls are shown by the
symbol
?.INSTANT NAV CONTROLS
The
N/O/¯/˙butttons that activate
the Media Player mode are on the front of
the Instant Nav:
NOSelection of previous/next fold-
er/artist/genre/album depending on
the selection mode activated
¯˙Play previous/ next trackVOICE COMMANDS
It is possible to use voice commands
without the need to change your normal
driving position to be recognized by the
system. The microphone is in the correct
position for this purpose.
The words that are recognized by the
system are identified as “voice com-
mands”.
The hands free system recognizes and
responds to a predefined list of voice com-
mands. The list of available voice com-
mands depends on where you are in the
hands free system menu. The list of voice
commands available at any time can always
be accessed by pressing
‘and saying
“Help” or by saying “Help” after a system
message. The system also recognizes per-
sonalized voice command versions, such
as, for example, the names in your phone
list.
U U
S S
I I
N N
G G

T T
H H
E E

S S
Y Y
S S
T T
E E
M M
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 23

24
BLUE&ME
™
in conjunction with Instant Nav
To use the voice commands with this
hands free system there is no need for any
learning stage for the system with your
voice.
To give the system a voice command,
press
‘and wait for the acoustic signal
that indicates that the voice recognition
system is activated; you can now give the
command in your normal voice, not too
quickly but without a break. When the
system recognizes the command, it will re-
spond or carry out an action.
The voice commands are organized in
three levels: 1
stlevel, 2ndlevel and 3rdlev-
el.
When a 1
stlevel valid* voice command is
given, the system is prepared to recognize
2
ndlevel voice commands; when a 2ndlev-
el voice command is given, the system is
activated to recognize 3
rdlevel voice com-
mands.
If the user gives a valid * 1
stlevel voice
command, the submenu for that command
remains activated until a voice command
that leads to another level is given or the
interaction is interrupted; the same rule is
valid for the lower levels (2 and 3).
For a list of all the available voice com-
mands, refer to the LIST OF AVAILABLE
VOICE COMMANDS chapter.
To listen to the last message given by the
system again, press
‘for more than 1
second or press
‘for a short while and
say “Repeat”.
The hands free system can provide in-
formation vocally.
A voice announcement is a voice mes-
sage proposed directly by the system. To
end a voice announcement, press ESCor
press
‘and say “Cancel”.
A voice interaction is an exchange of
communications/commands between the
hands free system and the user. To start
a voice interaction, press
‘and make a
command. To interrupt an interaction and
start a new interaction, press
‘at any
time during the interaction and give a
voice command.
To end an interaction, press ESC. You
will hear an acoustic signal that means that
the voice recognition has been deactivat-
ed.The help function can provide you, at any
time, with a list of commands available at
the level you are at. To use the help sys-
tem, say “Help”, listen to the list of com-
mands available and decide which com-
mand you want to give the system.
Adjust the volume to the level that is
best for you with the car moving. To
adjust the pre-set system volume, refer
to the description in the “EXTERNAL
AUDIO VOL function” paragraph in the
Instant Nav instruction manual. To tem-
porarily adjust the volume of the phone
call in profress, press +or –or adjust the
position of the Instant Nav control. The
volume will return to the original level at
the end of the call.
You can also press +of –to adjust the
volume of a voice announcement whilst
it is being given by the system.
Remember that to interrupt a voice an-
nouncement, you can press
‘at any time
during a voice interaction and give a new
voice command.
* Valid means that the voice command is part of the system vocabulary and therefore recognizable at a given level.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 24

25
BLUE&ME
™
in conjunction with Instant Nav
Notes
– The instructions for using the system
via the voice commands are shown by the
symbol
}.
– After having pressed
‘, if you do not
give a voice command within a few sec-
onds the system will ask you to give a
voice command. If you do not answer, the
voice recognition will be deactivated. This
also happens if you do not respond to a
question from the system. In such cases
you will hear an acoustic signal that means
that the voice recognition has been deac-
tivated.
– When the system does not manage to
recognize your voice command, it will give
you another chance to make a voice com-
mand. If you are not sure that the voice
command is correct, say “Help”. Use of voice recognition
The voice recognition system can some-
times make a mistake in recognizing a
voice command. To make sure that your
voice commands are always recognized,
stick to the following guide lines:
– After having pressed
‘, make the
voice command after the system has pro-
vided the acoustic signal that indicates that
the voice recognition is activated.
– After the system has asked a question,
wait for a second before giving the answer
to be sure that the voice recognition is ac-
tivated.
– If you want to make a command with-
out waiting for the system to finish its
message or question, you can press the
‘again briefly to interrupt the system
and give your command.
– Speak at a normal voice volume.
– Say the words clearly, not too quick-
ly but without a break.
– If possible, try and keep the noise in
the passenger compartment to a mini-
mum.– Before giving voice commands, ask
your companions not to talk. Since the
system recognizes words irrespective of
who is speaking, if several people are
speaking at the same time, the system
make recognize different words or addi-
tional words to those you have spoken.
– For optimum operation it is advisable
to close the sun roof if your car has one.
Notes
For countries where a mother tongue
version is not available, voice recognition
of commands and especially contacts in
the phone list may prove difficult. We ad-
vise adopting pronounciation that con-
forms to the language in the system.
To change the voice recognition lan-
guage, refer to a Fiat Dealership consult
the dedicated area in www.fiat.com.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 25

26
BLUE&ME
™
in conjunction with Instant Nav
DISPLAY
Various functions are shown on the con-
trol panel and the Instant Nav (see fig. 1).The control panel display shows various
types of information (fig. 2 and fig. 3):
– Information on the status of the mo-
bile phone connected via Bluetooth
®:
–
;this means that the system is con-
nected to a mobile phone with Blue-
tooth
®
– NO BLUETOOTH - indicates that the
connection with the mobile phone is in-
terrupted (versions with multifunction dis-
play)
– If there is no symbol
;this indicates
that the connection with the mobile
phone is interrupted (versions with re-
configurable multifunction display)
– The symbol
Ãindicates that the call
activated is the first one answered, this
symbol is only present in the case of call
waiting (versions with reconfigurable mul-
tifunction display).
– The symbol
Àindicates that the
call activated is the second one answered,
this symbol is only present in the case of
call waiting (versions with reconfigurable
multifunction display).–The
‰symbol means that a Tele-
phone Conference is activated (versions
with reconfigurable multifunction display).
– Name of the telephone operator ac-
tive on your mobile phone (if not available,
“- - - - - ” is displayed)
– Information relating to an SMS text
message having been received, the tele-
phone number or the contact name (if
stored in the directory) of the SMS mes-
sage sender.
– Information relating to the system
function activated or the menu option se-
lected (see figs. 2 and 3).
– The Instant Nav display will show the
following information relating to:
– the TEL function
– the incoming/outgoing calls (only if
the Privacy function is deactivated)
– the audio tracks
– the Multi Media Player settings.
For more information, see the de-
scription in the Instant Nav manual.
fig. 3F0L5402g
fig. 2F0L5401g
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 26