2009 FIAT CROMA turn signal

10
BLUE&ME
™
in conjunction with Instant Nav
GENERAL OPERATION
Voice command controls:the system functions can be carried out using voice commands only. Us-
ing voice commands whilst driving means that the system can be operated without taking your hands off the steering wheel.
Prolonged view of the display:never consult anything whilst driving that requires looking at the display for a long time. Stop the car safely in
accordance with the highway code before consulting any of the system functions that requires prolonged attention. Even only glancing at the dis-
play occasionally can have a dangerous affect if the driver’s attention is distracted at a critical time.
Setting the volume:do not turn the volume up too high. Whilst driving, keep the volume at a level where you can still here the traffic outside
and emergency signals. Driving without being able to hear these can cause accidents.
Use of Voice Recognition:the voice recognition software is based on a statistical process that is subject to error. It is your responsibility to
monitor the voice recognition functions allowed by the system and to correct any mistakes.
Dangers of Distraction:the functions could require manual settings (not using voice commands). Making these settings or entering information
whilst driving can distract attention causing an accident or resulting in serious danger. Before carrying out these operations, stop the car safely in
accordance with the highway code.WARNING
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 10

24
BLUE&ME
™
in conjunction with Instant Nav
To use the voice commands with this
hands free system there is no need for any
learning stage for the system with your
voice.
To give the system a voice command,
press
‘and wait for the acoustic signal
that indicates that the voice recognition
system is activated; you can now give the
command in your normal voice, not too
quickly but without a break. When the
system recognizes the command, it will re-
spond or carry out an action.
The voice commands are organized in
three levels: 1
stlevel, 2ndlevel and 3rdlev-
el.
When a 1
stlevel valid* voice command is
given, the system is prepared to recognize
2
ndlevel voice commands; when a 2ndlev-
el voice command is given, the system is
activated to recognize 3
rdlevel voice com-
mands.
If the user gives a valid * 1
stlevel voice
command, the submenu for that command
remains activated until a voice command
that leads to another level is given or the
interaction is interrupted; the same rule is
valid for the lower levels (2 and 3).
For a list of all the available voice com-
mands, refer to the LIST OF AVAILABLE
VOICE COMMANDS chapter.
To listen to the last message given by the
system again, press
‘for more than 1
second or press
‘for a short while and
say “Repeat”.
The hands free system can provide in-
formation vocally.
A voice announcement is a voice mes-
sage proposed directly by the system. To
end a voice announcement, press ESCor
press
‘and say “Cancel”.
A voice interaction is an exchange of
communications/commands between the
hands free system and the user. To start
a voice interaction, press
‘and make a
command. To interrupt an interaction and
start a new interaction, press
‘at any
time during the interaction and give a
voice command.
To end an interaction, press ESC. You
will hear an acoustic signal that means that
the voice recognition has been deactivat-
ed.The help function can provide you, at any
time, with a list of commands available at
the level you are at. To use the help sys-
tem, say “Help”, listen to the list of com-
mands available and decide which com-
mand you want to give the system.
Adjust the volume to the level that is
best for you with the car moving. To
adjust the pre-set system volume, refer
to the description in the “EXTERNAL
AUDIO VOL function” paragraph in the
Instant Nav instruction manual. To tem-
porarily adjust the volume of the phone
call in profress, press +or –or adjust the
position of the Instant Nav control. The
volume will return to the original level at
the end of the call.
You can also press +of –to adjust the
volume of a voice announcement whilst
it is being given by the system.
Remember that to interrupt a voice an-
nouncement, you can press
‘at any time
during a voice interaction and give a new
voice command.
* Valid means that the voice command is part of the system vocabulary and therefore recognizable at a given level.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:51 Pagina 24

33
BLUE&ME
™
in conjunction with Instant Nav
MANAGE AN INCOMING CALL
You can answer incoming calls with the
hands free function using the controls on
the steering wheel. When a call is received
the system will show the caller identity in-
formation, if available. The incoming call is
signalled by the personalized ring tones of
your mobile phone (the availability of this
function depends on the specification of
your phone).
Answer a phone call
– To answer a phone call, press
ßor
select the corresponding item from the
TEL menu on the Instant Nav.
– To end a phone call, press
ßfor more
than 1 second or select the correspond-
ing item from the TEL menu on the Instant
Nav.Reject a phone call
– To reject a call, press
ßfor more than
1 second.
Ignore a phone call
– To ignore a phone call and not listen
to the ring tone, press
ßor press &on
the Instant Nav.
Answer an incoming call during a
conversation
To answer an incoming call whilst an-
other phone conversation is in progress,
press
ß. The system will switch to the in-
coming call and place the current phone
conversation on hold.
Note
On some mobile phones you can trans-
fer the ring tones assigned to the people
in your phone list to the hands free sys-
tem. In this case the system will signal the
incoming call using your mobile phone’s
personalized ring tones.MANAGE A CALL IN PROGRESS
Transfer the call from the mobile
phone to the hands free system
If you are speaking on your mobile
phone and get into the car, you can trans-
fer the phone conversation from your mo-
bile to your car’s hands free system.
Proceed as follows:
– Get into the car and turn the ignition
key to the MAR position to activate the
hands free system.
– The system will notify the mobile
phone of the possibility of activating the
hands free system.
– To transfer the conversation to the
hands free system, activate this function as
set out by your mobile phone (the pro-
cedure depends on the type of mobile
phone).
– The phone conversation will be trans-
ferred to the car’s hands free system.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 33

37
BLUE&ME
™
in conjunction with Instant Nav
DELETING ALL MESSAGES
The system can save up to 20 SMS text
messages, when a new message is received
the oldest message in the list will be delet-
ed. it is possible to delete all the SMS text
messages in the system memory using a
single control.
?If you want to delete all the messages,
activate the system Main Menu and se-
lect DELETE ALL and then press OK
or
ß, the system will ask you DELETE
MESSAGES?, confirm the deletion by
pressing the OKof
ßbutton or can-
cel by pressing the ESCbutton.
}Or, through voice commands:
Press
‘and say “Message reader”.
After the buzzer, say “Delete all”;
Blue&Me™will ask you “Delete all
messages from the vehicle?”, say “Yes”
to confirm deleting all the SMS text
messages from the system, or “No” to
cancel the deletion.NOTIFICATION SETTINGS
The system SMS text message reader al-
lows the notification mode to be set when
a new SMS text message is received with
three options:
– VISUAL+ACOUSTIC:
the system signals the receipt of a new
message both in the panel display and
through an acoustic signal. The system
will also suggest reading the message.
The reading request will be shown on
the Instant Nav display:
– turn the OK knob to select the de-
sired item (accept or refuse read-
ing the SMS)
– press the OK knob to confirm the
selection.
– VISUAL NOT.:
the system only communicates the re-
ceipt of a new SMS text message vi-
sually through the panel display. The
message received can be read anoth-
er time (see Read last message re-
ceived and Message list paragraphs).
Only information that the SMS has
been received will be shown on the
Instant Nav display.– NOT ACTIVATED:
the system deactivates the SMS text
message reader so the receipt of a
new SMS text message will not be sig-
nalled in any way and the message will
not be transmitted to the system
when it is received.
?Activate the system Main Menu, select
the MSG READER option and then
press OKor
ß.Select the NOFITI-
CATION TYPE option and scroll
through the three options available us-
ing the
QorZbuttons, select the op-
tion you want and press OKor
ß.
}Or, through voice commands:
Press
‘and say “Message reader” af-
ter the acoustic signal way “Type of
notification”; the system will list the
available options that you can set say-
ing “Reader not activated” or “Visual
and acoustic notification” or “Visual
notification only”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 37

62
BLUE&ME
™
in conjunction with Instant Nav
TABLE OF SMS TEXT MESSAGE READER VOICE COMMANDS
Reading of last
messagge received
Activation of menu
SMS MESSAGE READERReading of last messagge received
Access to received messages list,
the system will show the first
messagge in the list
Deletes all messages present
in the message list, the system will ask for
confirmation to continue with the deletion
Activation of the function
Notification settings
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Messages received
• Received
• Delete all
• Delete messages
• Delete
• Type of notification
• Notification
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Message reader
• Messagges
• SMS reader
• SMS
• SMS reader
• SMS
• Read
• Reread
• Read
• Reread
• Call
• Call
• Delete
• Delete
• Delete message
• Delete message
• Reader not activated
• Switch off reader
• Deactivate reader
• Turn off reader
• Deactivate reader
• Forward
• Next
• Next
• Following
• Visual and acoustic
notification
• Visual and acoustic
• Visual plus acoustic
• Acoustic
• Back
• Previous
• Visual notification only
• Visual only
• Visual
Reading of the message
selected from those in the message list
Activation of calling the number for the
message selected
Cancellation of calling the
number for the message
selected
Move to next message
Move to previous message
Deactivation of SMS message reader;
when a new SMS message is received
nothing will be signalled or transmitted
to the system
Signalling, both visual through panel display
and acoustic through a “bip” of the arrival
of a new SMS message
Signalling, visual only through panel display of
the arrival of a new SMS message
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 62