Page 1824 of 1903
Downloaded from www.Manualslib.com manuals search engine Front Wiper Arm
Removal & Installation
1. Remove the wiper arm protective caps for thewiper arm mounting nuts (1).
2. Remove the wiper arm mounting nuts. (Tighten: Wiper arm mounting nuts to 55 ± 3 N·m)
3. Remove two wiper arms (1).
Rear Wiper Arm
Removal & Installation
1. Remove the rear wiper arm nut protective cap from the rear wiper arm.
2. Remove the wiper arm mounting nut (1), and remove the wiper arm, and the rubber ring.
(Tighten: Rear wiper arm mounting nut to 20 ± 3
N·m)
3. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150033
LTSM150035
15–240Chery Automobile Co., Ltd.
Page 1825 of 1903

Downloaded from www.Manualslib.com manuals search engine Front Wiper Link
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the left lower trim panel of the front wind-shield.
3. Remove the mounting bolts (1) and the front wiper motor electrical connector (2), then remove the
wiper link.
(Tighten: Wiper arm linkage mechanism mounting
bolts to 10 ± 1 N·m)
4. Installation is in the reverse order of removal.
Washer Bottle
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the front bumper (See Front Bumper Removal & Installation in Section 15 Body &
Accessories).
3. Disconnect the washer hose and the washer pump electrical connector.
4. Remove the mounting bolts (1) as shown to remove the washer bottle.
5. Installation is in the reverse order of removal.
Washer Pump
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the front bumper (See Front Bumper Removal & Installation in Section 15 Body & Accessories).
3. Disconnect the washer hose and the washer pump electrical connector.
4. Drain the washer fluid.
5. Remove the washer pump assembly.
6. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150034
LTSM150101
15
15–241Chery Automobile Co., Ltd.
Page 1826 of 1903
Downloaded from www.Manualslib.com manuals search engine Wiper Switch
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the steering wheel (See Steering Wheel Removal & Installation in Section 11 Steering).
3. Remove the steering column shroud retainingscrews (1) and then remove the shroud.
4. Disconnect the wiper switch electrical connector.
5. Loosen the clamp and remove the wiper switch.
6. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM110031
LTSM150106
15–242Chery Automobile Co., Ltd.
Page 1903 of 1903
Downloaded from www.Manualslib.com manuals search engine W
Washer Bottle, Body Exterior..................15-241
Washer Pump, Body Exterior ..................15-241
Weatherstrip, Body Exterior ...................15-231
Wheel Assembly, Wheels and Tires ..............10-52Wheel Balance, Wheels and Tires
................10-52
Wheels and Tires ........................... 10-47
Wiper Switch, Body Exterior ..................15-242
Wipers and Washers, Body Exterior .............15-233
Wiring Information .......................... 16-1
INDEX
AI-8