2009 CHERY TIGGO engine

Downloaded from www.Manualslib.com manuals search engine Spark Plug Wire 1.6L & 1.8L & 2.0L
Removal & Installation
1. Remove the engine cover.
2. Disconnect the negative battery cable.
3. Remove the hose (1), if necessary.
4. Disconnect the ignition coil electrical connector (2).
5. Twist the spark plug wire (3) from ignition coil andremove the spark plug wire.
6. Twist the spark plug wire (3) from spark plug then pull the spark plug wire straight up.
7. Remove the spark plug wire (1).
8. Installation is in the reverse order of removal.
Cylinder Number 123 4
Part Number A11-3707130HA A11-3707140HA A11-3707150HA A11-3707160HA
Length (mm) 405275165 125
Resistance (K) 6.99 - 12.085.32 - 9.593.92 - 7.48 3.4 - 6.71
ON-VEHICLE SERVICE
BESM020022
BESM030013
03
03–573Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine Spark Plug Wire 2.4L
Removal & Installation
1. Disconnect the negative battery cable.
2. Twist the spark plug wire (1) from ignition coils
3. Twist the ignition coils & spark plug wire assembly(2) from spark plug then pull straight up.
4. Remove the ignition coils & spark plug wire assem- bly (1).
5. Installation is in the reverse order of removal.
Spark Plug 1.6L & 1.8L & 2.0L
Removal & Installation
1. Remove the engine cover.
2. Disconnect the negative battery cable.
3. Remove the hose (1), if necessary.
4. Twist the spark plug wire (3) from spark plug then pull the spark plug wire straight up.
ON-VEHICLE SERVICE
LTSM030017
LTSM030019
BESM020022
03–574Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine 5. Remove the spark plug.(Tighten: Spark plugs to 30 N·m)
6. Inspect the spark plug condition.
7. Installation is in the reverse order of removal.
Installation Notes:
• Verify the proper spark plug gap before installing
spark plugs.
Spark Plug 2.4L
Removal & Installation
1. Disconnect the negative battery cable.
2. Twist the spark plug wire from spark plug then pull
straight up.
3. Remove the ignition coils retaining bolts (2).
4. Remove ignition coils (1).
5. Remove the spark plug using a quality socket with a rubber or foam insert.
(Tighten: Spark plug to 45 N·m)
6. Inspect the spark plug condition.
7. Installation is in the reverse order of removal.
ON-VEHICLE SERVICE
BESM030011
LTSM030022
LTSM030018
03
03–575Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine EVAPORATIVE EMISSIONS
GENERAL INFORMATION03-577
Description 03-577
Operation 03-577
Electrical Schematics 03-579
Specifications 03-583
Special Tools 03-583
ON-VEHICLE SERVICE03-584
Canister Control Valve 1.6L & 1.8L &
2.0L 03-584
Description 03-584
Operation 03-584
Removal & Installation 03-584
Canister Control Solenoid Valve 2.4L 03-584
Description 03-584
Operation 03-584Removal & Installation
03-585
Vapor Canister 1.6L & 1.8L & 2.0L 03-585
Description 03-585
Operation 03-585
Removal & Installation 03-585
Vapor Canister 2.4L 03-586
Description 03-586
Operation 03-586
Removal & Installation 03-586
EGR Control Solenoid Valve 2.4L 03-587
Removal & Installation 03-587
EGR Valve 2.4L 03-588
Description 03-588
Operation 03-588
Removal & Installation 03-589
03–576Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine GENERAL INFORMATION
Description
The evaporation control system prevents the emission of fuel tank vapors into the atmosphere. When fuel evaporates
in the fuel tank, the vapors pass through vent hoses or tubes to an activated carbon filled evaporative canister. The
canister temporarily holds the vapors. The Engine Control Module (ECM) allows intake manifold vacuum to draw
vapors into the combustion chambers during certain operating conditions.
Operation
1.6L / 1.8L / 2.0L
1-Fuel Tank2-Fuel Vapor
3-Canister 4-Air Intake
5-Hose 6-Canister Control Valve7-Throttle Valve8-Air Filter Assembly
9-To Engine 10-Air Intake
BESM030026
03
03–577Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine The ECM will only energize the solenoid when the engine is at operating temperature, but will de-energize it during
periods of deceleration. When de-energized, no vapors are purged. The pulse-width modulated canister control valve
modulates the fuel vapor purge rate from the vapor canister and fuel tank to the engine intake manifold. 2.4L
1 - Fuel Tank2 - Canister
3 - Canister Control Valve 4 - EGR Valve5 - Air Filter Assembly 6 - Throttle Valve
GENERAL INFORMATION
LTSM030031
03–578Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine Electrical Schematics
Canister Control Valve 1.6L /1.8L
GENERAL INFORMATION
LTSMW030050T
03
03–579Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine Canister Control Valve 2.0L
GENERAL INFORMATION
LTSMW030031T
03–580Chery Automobile Co., Ltd.