2009 CADILLAC ESCALADE Owners Manual

Page 209 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Oil Pressure Light
{CAUTION:
Do not keep driving if the oil pressure is low.
The engine can become so hot that it catches �re.
Someone could be burned. Check the oil as soon
as possible and have the v

Page 210 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Security Light
For information regarding
this light and the vehicle’s
security system, see
Content Theft-Deterrent on
page 2-21.
Fog Lamp Light
The fog lamp light comes
on when the fog lamps are
in

Page 211 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Highbeam On Light
This light comes on when
the high-beam headlamps
are in use.
SeeHeadlamp High/Low-Beam Changer on page 3-8
for more information.
Tow/Haul Mode Light
This light comes on when
the Tow/

Page 212 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Here are some situations owners may experience with
the fuel gage. None of these indicate a problem
with the fuel gage.
At the gas station, the fuel pump shuts off before
the gage reads full.
It takes

Page 213 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual DIC Buttons
The buttons are the
trip/fuel, vehicle
information, customization,
and set/reset buttons.
The button functions are
detailed in the following
pages.
3(Trip/Fuel):Press this button to displa

Page 214 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Fuel Range
Press the trip/fuel button until FUEL RANGE displays.
This display shows the approximate number of
remaining miles (mi) or kilometers (km) the vehicle can
be driven without refueling. The d

Page 215 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Transmission Temperature
Press the trip/fuel button until TRANS TEMP displays.
This display shows the temperature of the automatic
transmission �uid in either degrees Fahrenheit (°F) or
degrees Celsi

Page 216 of 586

CADILLAC ESCALADE 2009 3.G Owners Manual Units
Press the vehicle information button until UNITS
displays. This display allows you to select between
English or Metric units of measurement. Once in this
display, press the set/reset button to s