
650iOwner's Manual for Vehicle
Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with 
enhanced control and security when you drive it. We therefore 
have this request:
Please take the time to read this Owner's Manual and familiarize 
yourself with the information that we have compiled for you 
before starting off in your new vehicle. It contains important data 
and instructions intended to assist you in gaining maximum use 
and satisfaction from your BMW's unique range of technical fea-
tures. The manual also contains information on maintenance 
designed to enhance operating safety and contribute to main-
taining the value of your BMW throughout an extended service 
life.
This manual is supplemented by a Service and Warranty Informa-
tion Booklet for US models or a Warranty and Service Guide 
Booklet for Canadian models. 
We wish you an enjoyable driving experience.
BMW AG 

 7Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Service and warranty
We recommend that you read this publication 
thoroughly.
Your BMW is covered by the following warran-
ties:
>New Vehicle Limited Warranty
>Rust Perforation Limited Warranty
>Federal Emissions System Defect Warranty
>Federal Emissions Performance Warranty
>California Emission Control System Limited 
Warranty
Detailed information about these warranties is 
listed in the Service and Warranty Information 
Booklet for US models or in the Warranty and 
Service Guide Booklet for Canadian models.
Reporting safety defects
For US customers
The following applies only to vehicles owned 
and operated in the US.
If you believe that your vehicle has a defect 
which could cause a crash or could cause injury 
or death, you should immediately inform the 
National Highway Traffic Safety Administration 
(NHTSA) in addition to notifying BMW of North 
America, LLC, P.O. Box 1227, Westwood, New 
Jersey 07675-1227, Telephone (800) 831-
1117.
If NHTSA receives similar complaints, it may 
open an investigation, and if it finds that a safety 
defect exists in a group of vehicles, it may order 
a recall and remedy campaign. However, 
NHTSA cannot become involved in individual 
problems between you, your dealer, or BMW of 
North America, LLC.
To contact NHTSA, you may call the Vehicle 
Safety Hotline toll-free at 1-888-327-4236 
(TTY: 1-800-424-9153); go to 
http://www.safercar.gov; or write to: Adminis-
trator, NHTSA, 400 Seventh Street, SW., 
Washington, DC 20590. You can also obtain 
other information about motor vehicle safety 
from http://www.safercar.gov
For Canadian customers
Canadian customers who wish to report a 
safety-related defect to Transport Canada, 
Defect Investigations and Recalls, may call 1-
800-333-0510 toll-free from anywhere in Can-
ada or 1-613-993-9851 from the Ottawa region 
and from other countries, or contact Transport 
Canada by mail at: Transport Canada, ASFAD, 
Place de Ville, Tower C, 330 Sparks Street, 
Ottawa, ON, K1A 0N5.
You can also obtain other information about 
motor vehicle safety from http://www.tc.gc.ca 

Cockpit
12
Instrument cluster
1Indicator lamps for turn signals
2Speedometer
3Indicator and warning lamps13
4Displays for
>Active cruise control
*72
>Leaving lane warning
*102
5Tachometer76
6Engine oil temperature
*77
7Display for
>Time/date76
>Outside temperature76
>Indicator and warning lamps81
>Speed for cruise control68
>Desired speed for active cruise 
control
*728Display for
>Odometer and trip odometer76
>Computer77
>Date and remaining travel distance 
for service requirements79
>Sport automatic transmission
*62
>Dynamic Driving Control
*64
>High-beam assistant
*106
> Check Control message present81
9Fuel gauge77
10Resetting trip odometer76 

iDrive
18
Menu overview
Communication
>Telephone*
>BMW Assist* or BMW TeleServices*
Navigation or onboard information
>Navigation system*
>Onboard information, e.g. for displaying 
the average fuel consumption
Entertainment
>Radio
>CD player and CD changer
*
>USB-audio interface* for external audio 
device
Climate
>Vent settings
>Automatic programs
>Parked car operation
 menu
>Switching off Control Display
>Tone and display settings
>Settings for your vehicle, e.g. for the central 
locking system
>Display of maintenance intervals and dead-
lines for legally mandated inspections
>Settings for telephone
Basic operation
From radio readiness, refer to page60, the fol-
lowing message is shown on the Control Dis-
play:
To hide the message:
Press the controller.
This displays the start menu.
The message is hidden after approx. 10 sec-
onds.
Start menu
You can call up all the functions of iDrive using 
five menu items.
Opening start menu
Press the   button. 

At a glance
 21Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Status information
1Display for:
>Entertainment:
Radio, CD, AUX, USB-audio interface
*
>Telephone* in "Communication": 
Name of linked mobile phone, network 
search or no network
>"BMW Assist"
*:
Active voice connection with a 
BMW Assist service
2Entertainment sound output off
3Station that transmits traffic information is 
received
*:
"TI":
Traffic information for the navigation sys-
tem
 can be received and transmission is 
switched on
4Display for:
> New entries present in "Missed calls"
*
> Roaming active
5 Telephoning
* is possible if the mobile 
phone is paired in the vehicle
 Reception strength of mobile phone 
network, dependent on mobile phone
6Time
Other displays:
The status information is temporarily hidden 
when there are Check Control instructions or 
inputs via the voice command system
*.
Assistance window*
Additional information appears in the assis-
tance window:
>the computer or the trip computer
>the arrow or map view with a navigation sys-
tem
*
>the current position
Selecting display
1.Move the controller to the right to change to 
the assistance window and press the con-
troller.
2.Select a menu item.
3.Press the controller. 

Controls
 69Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
welcome relief from the constant adjustment of 
speed that can accompany driving in traffic on 
freeways or other high-speed thoroughfares. 
Especially on longer trips and in traffic conges-
tion, the system can reduce fatigue and tension, 
while increasing your enjoyment of driving. 
Please use it safely and responsibly.
In addition to holding a steady cruising speed, if 
you encounter slower vehicles ahead, active 
cruise control will, within limits, adjust your 
vehicle’s speed automatically so that you can 
flow with the traffic without having to make con-
stant adjustments. If, for example, while cruis-
ing at the selected speed, you begin to 
approach a slower vehicle ahead of you in the 
same lane, the system will reduce your vehicle’s 
speed to the same as that of the vehicle ahead 
to maintain your selected distance setting. You 
can vary the following distance, which will vary 
with speed. Based on your selected distance 
setting, the system automatically decreases the 
throttle setting and lightly applies the brakes if 
necessary. In addition, if the vehicle ahead of 
you slows to a complete stop, the system can 
follow this action within the given scope and 
can also accelerate from a complete stop if the 
vehicle ahead of you drives off again shortly 
thereafter. During braking, your vehicle brake 
lamps will automatically illuminate to alert a fol-
lowing driver to take action. In addition, it may 
be necessary for your vehicle to downshift the 
automatic transmission to maintain the dis-
tance setting selected. As soon as the road in 
front of you has no moving vehicles, the system 
will accelerate to your desired speed. This set 
speed is also maintained on downhill grades, 
however the vehicle speed can drop below the 
set speed when driving uphill if the engine out-
put is not sufficient.
Active cruise control cannot detect stop 
signs, red lights, or any object that is 
stopped or is blocking the road.
Active cruise control is not and must not be 
used as a collision avoidance/warning system.
Since this active cruise control system is a new 
technology and operates differently from con-
ventional cruise control systems which you may 
be accustomed to, it is necessary that you read all of the pages relating to this system before 
use. Carefully read and observe the information 
on the system limitations beginning on page73 
to obtain a good command of the system and its 
range of applications.<
Brake pedal feel
When the system brakes and you also depress 
the brake pedal, a somewhat different braking 
feel results.
Professional* navigation system
If a navigation DVD is in the drive, refer to 
page134, within limits the system adjusts the 
accelerating and braking behavior of the vehicle 
to the road you are driving on.
To ensure that the system is informed of 
the current course of the road, always use 
the latest navigation DVD if possible.<
When the vehicle position is unknown, e. g. 
when you leave the map area, this influence of 
the navigation system is not available.
Applications
Please try the system first during sparse traffic 
and clear road conditions so that you can get 
used to the system. After you have experience 
and understand the system, only then use it 
during normal traffic.
As with conventional cruise control systems, 
active cruise control in no way reduces or sub-
stitutes for the driver’s own personal experi-
ence, responsibility, alertness and awareness in 
adjusting speed, braking or otherwise control-
ling the vehicle. The driver should decide when 
to use the system on the basis of road, traffic, 
visibility, and weather conditions. Active cruise 
control is intended for use on highway-type 
roadways where traffic is moving relatively 
smoothly as well as in slow-moving traffic. Do 
not use the system in city driving; in complex 
driving situations; heavy traffic such as during 
rush hour; on curvy, winding roads, slippery 
roads or roads with sharp curves such as high-
way off-ramps; during inclement weather such 
as snow, strong rain or fog; or when entering 
interchanges, service/parking areas or toll  

Controls
 73Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
If the sensor is not aligned properly, e. g. due to 
damage, the active cruise control cannot be 
activated.
System limitations
As with conventional cruise control sys-
tems, active cruise control in no way 
diminishes or substitutes for the driver's own 
personal responsibility, alertness and aware-
ness in adjusting speed, braking or otherwise 
controlling the vehicle. The driver should 
decide when to use the system on the basis of 
road, traffic, visibility, and weather conditions. 
Active cruise control is intended for use on free-
way-type roadways where traffic is moving rel-
atively smoothly. Do not use this system in city 
driving; in complex driving situations; on curvy, 
winding roads, slippery roads or roads with 
sharp curves such as highway off-ramps; during 
inclement weather such as snow, strong rain or 
fog; or when entering interchanges, service/
parking areas or toll booths. It is also important 
to regulate your vehicle’s speed and distance 
setting within applicable legal limits. Always be 
ready to take action or apply the brakes if nec-
essary, especially when the system is actively 
following a vehicle in front of you.<
Always remember that the range and abil-
ity of the system do have physical limita-
tions. For example, the system may not detect 
vehicles driving ahead if they suddenly brake 
heavily in stop-and-go traffic during accelera-
tion. The system will not apply the brakes or 
slow your vehicle when a very slow-moving 
vehicle, stopped vehicle or stationary object is 
in the lane ahead of you, for example when 
approaching a traffic light or parked vehicle or 
when a vehicle is stalled in your lane. Also, the 
system does not react to oncoming traffic, pedestrians or other types of potential traffic 
s u c h  a s  a  r i d e r  o n  a  h o r s e b a c k .  I t  i s  a l s o  p o s s i b l e  
that the system may not detect smaller moving 
objects such as motorcycles or bicycles. Be 
especially alert when encountering any of these 
situations as the system will neither automati-
cally brake, nor provide a warning to you. Also, 
be aware that every decrease in the distance 
setting allows your vehicle to come closer to a 
vehicle in front of you and requires a heightened 
amount of alertness.<
The system cannot allow the vehicle to drive off 
automatically in situations that make driving off 
considerably more difficult, e.g. on steep uphill 
grades, with a heavy trailer or before raised 
areas in the road.
Near radio astronomy stations, the system 
radar is deactivated at speeds under 20 mph/
30 km/h due to legal regulations.
Be certain to interrupt the system when 
you pull into an exit lane for a highway 
offramp.<
Also, vehicles traveling in a staggered manner 
on a highway may cause a delay in the system’s 
reaction to a vehicle in front of you or may cause 
the system to react to a vehicle actually in the 
lane next to you. Always be ready to take action 
or apply the brakes if necessary.
In addition, the system is interrupted 
whenever the driver applies the vehicle 
brakes, shifts the transmission from drive/D to 
neutral/N, or deactivates DSC. After any inter- 

Controls
 79Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
4.Select "Trip computer" and press the con-
troller.
>Departure time
>Driving time
>Distance traveled
>Average speed
>Average fuel consumption
Switching trip computer on/off and resetting 
all values:
1.Select "Set" and press the controller.
2.Select the desired menu item and press the 
controller.
Display options
You can display the computer or the trip com-
puter in the assistance window.
1.Move the controller to the right to change to 
the assistance window and press the con-
troller.
2.Select a menu item:
>"Onboard info"
>"Trip computer".3.Press the controller.
Service requirements
The remaining driving distance and the date for 
the next maintenance are displayed briefly with 
the ignition switched on.
Your BMW Service Advisor can deter-
mine your vehicle's current service 
requirements by reading out the data stored in 
the remote control.<
Additional information
You can view more detailed information by 
using the Control Display, for operating princi-
ple refer to page16.
1.Open the start menu.
2.Press the controller to open the  menu.
3.Select "Info sources" and press the control-
ler.
4.Select "Service Info" and press the control-
ler.