2009 AUDI S8 engine

Opening and closing
- To swit ch on the child safe ty lock, turn the ignition key in
the direction of the ar row.
- To
switch off the child safety lock, turn the ignition key in
the opposite d irection to the arrow.
The child safety lock prevents the doors from being opened from the
inside when you have smal l children sitting in the rear. •
Applies t o vehicl es : w it h power c hild s afety lock i n the rea r doo rs
Power child safety lock for the rear doors t
The power child safety lo ck prevents the rear doors from
being o pene d from the inside.
Fi g. 45 Section from
dr ive r's do or: con trols
T he rear doors are equippe d with a power child sa fe ty lock .
It is operated w ith the two safety buttons(!) in the driver 's
doo r~ fig. 45 .
Press the left an d/or rig ht safety button to d isable t he
rear powe r window(s) and prevent the respective rear
door from being o pened from the inside . The LED in the
button wil l light up when the child safety lock is turned
on .
- Pr ess the il lumina ted butt on aga in to t urn the child
safety feat ures
off .
When the ch ild safety lock is activated, the interior door opening
lever is inoperative; the door can only be opened from th e outside.
I n addi tion, the wi ndow regu lator for that door is a ls o inoperative
when the child safe ty lock is activated .
I f the ch ild safety lock has been act ivated on both the left
a nd right
side , then the fol lowing features are swi tched off: the buttons for
the interio r lights, the sun b lind * in the rear window and the buttons
f or the power sun blinds* in the s ide windows. In addition to this ,
the rear cl imate control* is set to the PASSIVE mode. T his means
that the cl imate co ntrols in the front adjust the hea ting and ventila­
tion in the rear of the vehicle~
page 125 .
[ i ] Tip s
• In order to activate the child safety lock on the left and the right
side, you have to press the two safety bu ttons in succession.
• Make certain that the indicator light in the corresponding safety
bu tton illuminates when the child safety lock is activated .•
Convenience key
Ap plies t o ve hicles : with C onv eni enc e ke y
Description
Opening your vehicle and starting the engine with the key
still i n yo ur pocket.
The Convenience key features is a keyless system which gives you
the possibility to lock and un lock your veh ic le , as well as to start the
engine without having to use your key.
It does not matter if you have your key in your jacket pocket or in
your briefcase . As soon as you get w ithin a cer tain distance to the ..,_

vehicle, the system senses that your are approaching, it makes a
quick check to see if you are "authori zed" and then i t does the
following :
• unlocks the vehicle ~
page 59 .
• locks the vehicle~ page 60.
• switches on the ignition and starts the engine when y ou press
the [ START] button . You do not have to insert your key into the igni ­
t ion lock ~
page 131.
& WARNING
• When you lock your vehi cle from out side , nobody -especially
c hildr en -sh ould rem ain in side the vehi cle . Rem emb er, w hen you
lock the vehicle fr om the outside the window s cannot be opened
from the in side .
• When you leave the vehicle , alwa ys remove the ignition key and
t a ke it wi th yo u. Thi s w ill prevent pa ss engers (children , for
example ) fro m acciden tally bein g locked in the vehicle should they
ac cid entally pr ess the p ower lock ing switch in the doo rs.
• Do not leave children in side the vehicl e un sup ervised. In an
eme rg ency it would be i mpo ssible to ope n th e door s from th e
o ut side wi thout the ke y.
[ i ) Tips
• For the Convenience key to properly work, you must always have
your vehic le key with you .
• The vehicle will lock or unlock the doors only if an authorized key
comes within 5 ft 11.5 meters) from one of the vehicle doors or the
rear lid.
• You can still lock or unlock your vehic le using the remote control
key buttons, however the se lector lever must in the P position .
• For Declaration of Compliance to United States FCC and Industry
Canada regulations ~
page 385. •
Controls and equip ­
ment
Opening and clo sing
Ap plies to veh ic les : wi th C onve nie nce ke y
Unlocking the vehicle
Y ou can unlock the doors and rear lid without using the
remote control .
Fig . 4 6 Convenien ce
k ey: U nlo ck in g a door
- Grab the door hand le . The door automat ica lly un locks.
P ull the doo r handle to o pen the doo r.
A door will unlock as you approach a door handle and the system
senses that you have an authorized key . This applies to each door on
t he vehicle . The authorized key on ly has to be within a range of
about 5 feet 11 .5 meters) from the respective door .
Whenever you un lock a door, the driver's door a lso un locks . Yo u can
set the power lock system using the me nu in the
MMI system, for
examp le, if you want to unlock just one specific door , or all the
veh ic le doors
~ page 52 .
[ i ) Tips
If you r vehic le has been standing f or an extended pe riod, p lease
note the following:
• To conserve battery power, the sensor will turn off after a few
days. When you come back, you will have to pull on the door hand le
once to un lock the door and then a second time to open the door .
~
I • •

How is the anti-theft alarm system switched off?
The anti-theft alarm system is switched off only when you unlock
your vehicle. If you do not open a door within 60 seconds after you have unlocked with the remote control, the vehicle will lock itself
again automatically.
When will the anti-theft alarm system be triggered?
When the vehicle is locked, the alarm system monitors and protects
the follow ing parts of the vehicle:
• engine compartment
• luggage compartment
• doors
• ignition
When the system is activated, the alarm will be triggered if one of
the doors, the engine hood or the rear lid are opened, or if the igni­
tion is turned on. The anti-theft alarm system will also go off when
the battery is disconnected.
Unlocking the rear lid by inser ting and turning the key inside the
rear lid locking cylinder will trigger the optical and acoustic alarm .
You can also trigger the alarm by pressing the PANIC button on your
remote control. This will a lert other people in case of emergency .
Press the
PANIC button again to turn off the alarm.
How is the anti -theft alarm switched off when
triggered?
The alarm system is switched off when you unlock the vehicle or
when the ignition is switched on. The alarm will a lso switch itself off
when it comes to the end of its cycle .
Emergency flasher and horn
The emergency flasher will blink briefly and the horn sounds when
the doors, engine hood and rear lid are properly closed.
If the emergency flashers do not b link , or the horn does not sound,
check the doors, engine hood and rear lid to make sure they are
properly closed . If you close a door, the hood or the rear lid with the
Con tro ls and eq uip­
ment
Opening and closing
anti-theft alarm switched on, the emergency flashers will blink and
the horn will sound only a fter you have closed the door or lid .
[ i ] Tips
For the anti-theft alarm system to function properly, make sure all
vehicle doors and windows are closed before leaving the vehicle .•
Power windows
Controls
Vehicle care I I
Fig. 48 Driver's door:
power window
switches
Fig . 49 Driver's door:
Switches (vehicles
with power child safety
lock ) _,.
irechnical data

Opening and closing
Switches for front door windows
@ operates the window in the driver's door.
@ operates the window in the front passenger's door.
Switches for rear windows
© operates the left rear window.
@ operates the right rear window .
Safety switch
© Safety switch for rear window operation.
& WARNING
• Do not leave children unattended in the vehicle, especially with
access to vehicle keys. Unsupervised use of the keys can result in
starting of the engine and use of vehicle systems such as power
windows, etc. which could result in serious injury.
• Remember -you can still open or close the power windows for
about ten minutes after the ignition is switched off. Only when
either of the front doors are opened are the power windows
switched off.
• Be careful when closing the windows. Check to see that no one
is in the way, or serious injury could result!
• Always remove the ignition key whenever you leave your
vehicle.
• If you lock your vehicle from the outside, no one, especially chil­
dren, should remain in the vehicle.
• Do not stick anything on the windows or the windshield that
may interfere with the driver's field of vision.
[ i] Tips
• In addition to the switches in the driver's door there is a separate
switch in each door for the power window in that door=>
page 63,
fig.
50 .
• The driver can lower or raise the power side blinds * in the side
windows by using switches © and
@. •
Switches in the driver's door
The driver can operate all windows.
If the respective switch is pushed or pulled the window will
open or close. The power window switches have a
two-posi­
tion function:
Opening the windows
- Push the switch to the first stop and hold it there until the
window has lowered to the desired position.
- Push the switch briefly to the
second stop: the window
will automatically open all the way.
Closing the windows
-Pull the switch up to the first stop and hold it there until
the window has risen to the desired position.
- Pull the switch quickly to the
second position: the
window will automatically close all the way=>
& in
"Controls" on
page 61.
Activating/deactivating rear windows
- Push the switch ®=> page 61, fig. 48 to the depressed
position to activate the rear windows - the light in the
switch will go out.
- Briefly press the switch ® to
deactivate the rear
windows - the switch will return to the safety position
and the light
I will illuminate.

Opening and closing
-In position @, briefly press the control to tilt the roof up
completely.
- To tilt the roof open to any intermediate position press
and hold the switch until the roof reaches the desired
position.
Sliding the roof open
- Turn the switch to position (D to open the roof all the
way.
- Turn the switch to any other position to open the roof to
any intermediate position.
When the glass roof opens, the sun visor, which is designed to ward
off strong sunlight, opens along with it. The visor can be closed
manually when the sunroof is closed.
[ i J Tips
• Be aware that the sunroof may actually be open when the sun
visor is closed. Check and make sure that the sunroof is shut when
parking the car or if it suddenly starts raining.
• If the sunroof is not fully closed but you have pressed and held
the switch for the tilt position, the sunroof will not tilt. •
Closing the power sunroof
Sliding the roof shut
- Turn the rotary switch to position®=> page 65, fig. 53
=> & .
Tilting the roof shut
-Briefly pull the rotary switch to close the roof. -
To tilt the roof down to any intermediate position pull and
hold the switch until the roof reaches the desired posi­
tion.
& WARNING
Improper use of the power sunroof can cause serious personal
injury.
• Be careful when closing the power sunroof. Not paying atten­
tion could cause you or others to be trapped and injured as the
roof closes.
• Always take the key with you when you leave the vehicle to
prevent injuries caused by the roof closing.
• Never leave children or persons requiring assistance alone in
the vehicle, especially when they could access the vehicle keys. Unsupervised use of the keys can result in the engine being
started or use of vehicle systems such as the power windows, etc.
which could result in serious injury. The doors could be locked
with the remote key, delaying help in an emergency.
• The power sunroof will continue to operate until the ignition
key has been removed and one of the front doors has been
opened. •
Power emergency closing
The sunroof can still be closed electrically if for some
reason the overload protection function becomes acti­
vated.
The power sunroof is equipped with an overload protection
feature. If, under normal conditions, the power sunroof will
not close, you can close it using this feature.
- Turn the rotary switch to position ®=>page 65, fig. 53 . .,_

- Now pull the switch and hold it in this position until the
power sunroof closes completely.
& WARNING
Improper use of the power sunroof can cause serious personal
injury.
• Be careful when closing the power sunroof. Not paying atten ­
tion could cause you or others to be trapped and injured as the
roof closes.
• Always take the key with you when you leave the vehicle to
prevent injuries caused by the roof closing
• Never leave children or persons requiring assistance alone in
the vehicle, especially when they could access the vehicle keys. Unsupervised use of the keys can result in the engine being
started or use of vehicle systems such as the power windows, etc.
which could result in serious injury. The doors could be locked
with the remote key, delaying help in an emergency.
• The power sunroof will continue to operate until the ignition
key has been removed and one of the front doors has been
opened. •
Con tro ls and eq uip­
ment
Opening and closing
Emergency closing by hand
The sunroof can be closed by hand in case of a power
failure.
Removing the cover
Fig . 54 Section from
headliner: Where to
place the screwdriver
Fig . 55 Section from
headliner: Crank for
emergency operation
Insert the flat side of the screwdriver (found in the
vehicle tool kit) at the rear edge of the lens as indicated
by the -arrows- :::;, fig. 54.
Carefully pry the clear lens cover open and remove it. .,...
Vehicle care I I irechnical data

Clear vision
Lights
Switching the headlights on and off ·'t!-·
In the "AUTO " position, a light sensor automatically
s w itches t he head- and tailligh ts on and off in response to
l ight con ditio ns.
Fig . 56 Instrument
p an el: light switch
Switching on automatic headlight control
- T urn th e lig ht switch to AUTO => fig. 56 .
Switching on the side marker lights
- T urn the light switch to ~oo~.
Switching on the headlights and high beam
- T urn th e li ght swit ch to fD.
- Pu sh the high beam leve r forw ard towa rds t he instru -
m ent panel
=> page 73 .
Switching off the lights
- T urn t he light switch to 0 .
Con tro ls and eq uip­
ment
Clear vision
The headlights only work when the ignition is switched on . While
starting the engine or when switching off the ignition, the head ­
lights will go off and only the side marker lights will be on.
After starting the engine, the xenon headlights are automa tically
adjus ted to the load and a ngle of the vehic le (for example, during
acceleration , braking) . This prevents oncoming traffic from exper i­
encing unnecessary headl ig ht g la re from your xenon head ligh ts .
If the system is not operating properly, a warning symbol in the
Auto -Check Contro l is displayed => page
36.
With the side marke r lights or head ligh ts switched on, the sym bol
next to the light switch illuminates
:oo:.
Daytime running lights
• USA models : The daytime running lights wi ll come on automati­
ca lly when the ig nition is turned on and the ligh t swi tch => fig. 56 is
in the
O position or the AUTO position (only in daylight conditions).
The
Daytime running lights func tio n can be tur ned on and off in the
MMI menu
E xterior lighting => page 70 => & .
• Canada models: The dayti me ru nn ing lights wi ll come on au to ­
matically when the ignition is turned on and the light switch
=> fig. 56 is i n the
O po sitio n or the AUTO po siti on (only in dayligh t
condi tions) => & .
Automatic headligh t control
In the switch posi tion AUTO the automatic headlight cont ro l is
t urned on . The low beams are turned on automa tica lly through a
light sensor as soon as ambient brightness (e .g . when driving into a
t unnel) fa lls below a value preset at the factory . When ambient
brightness increases again, the low beams are turned off again
aut omatically =>& .
I n the
AUTO posit io n the low beams are switched off automatically
when the ignition is turned off. If the high beams were switched on,
they w ill come o n again the ne xt time the a utomatic head ligh t
~
Vehicle care I I irechnical data

Clear vision
To ensure the system works properly in winter, keep the washer jets
free of snow and remove any ice using a de-icing spray. •
Service position
The wiper blades can only be changed in the service posi­
tion.
Fig . 77 MMI display :
Windshield wipers
-At below freezing outside temperatures, make sure first
that the wiper blades are not frozen to the windshield.
- Press the
I CAR I function button.
Select
Systems in the CAR menu.
Select
Windshield wipers. The Windshield wipers menu
appears~ fig. 77.
- Select
Service position on to turn the service position on
or
off to return the windshield wiper to its original posi­
tion.
You must only attempt to change the wiper blades when the service position is activated. This way, when you are working on the wind­
shield wipers, you can avoid damaging the paint on the engine
hood.
[ i ] Tips
• You can also turn on the service position, for example, if you
want to protect the windshield from icing, using a cover.
• The service position turns itself
off, whenever you use the wind­
shield wiper lever. •
Installing new wiper blades
Wiper blades in good condition help keep the windshield
clear.
Fig . 78 Removing the
wiper blades
Fig. 79 Installing
wiper blades