Page 257 of 489
Personal SurroundTo change the Personal Surround
setting, highlight‘‘PERSONAL
SURROUND ’’from the setup menu
with the ▼or▲ button and press
the ENT button. The effect selection
appears. Select
‘‘Cinema, ’’ ‘‘Music, ’’or ‘‘Voice ’’
by pressing the
or
button, and
enter your selection by pressing the
ENT button. The ‘‘PERSONAL
SURROUND ’’logo is displayed in
the upper right corner of the screen. If you select
‘‘Off, ’’the logo
disappears, and there will be no
special sound effect.
CONTINUED
Rear Entertainment System
253
Feat ures
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 258 of 489
INITIAL SETTINGS MenuWhen you press the SETUP button
on the rear control panel when a
DVD is not playing, the‘‘INITIAL
SETTINGS ’’menu is displayed.
There are two selectable menus:
‘‘ Language ’’and ‘‘Others.’’
INITIAL SETTINGS (Language)When you select ‘‘Language ’’with
the
or
button, the menu shown
above appears.
To return to the stop or previous
screen, select ‘‘Exit ’’using the
or
button, and then press the ENT, or
the SETUP button. Menu Language
To select the language used in the
DISC menus, select
‘‘Menu
Language ’’by pressing the ▼or▲
button.
Rear Entertainment System25408/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 259 of 489
Select the desired language by
pressing the
or
button, and then
pressing the ENT button.
The selectable languages are,
English, French, Spanish, German,
Italian, Dutch, Chinese, Korean,
Thai, Japanese or others.
If you want another language than
those listed, you need to enter the
code number of the desired
language. Select ‘‘other, ’’and press
the ENT button. The display changes
as shown in the next column.
If you select ‘‘No, ’’and press the
ENT button, the display returns to
the initial screen of the ‘‘Language ’’
menu.
CONTINUED
Rear Entertainment System
255
Feat ures
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 260 of 489

If you select‘‘Yes, ’’the display
changes to the language code input
mode. Select the first digit using the
▼ ,▲ ,
,or
button, and press
the ENT button to enter it. Repeat
this until all four digits are filled.
When the fourth digit is entered, the
cursor automatically moves to ‘‘ENT ’’
on the display. Press the ENT button
on the control panel to enter the new
language code.
If you made a mistake entering a
number digit, select ‘‘DEL ’’on the
display with the ▼,▲ ,
,or
button, and press the ENT button on
the control panel. Then select and
enter the correct digit as described.
The display returns to the initial
‘‘Language ’’menu screen. Audio Language
You can select the dubbed language
before playing DVDs.
Select
‘‘Audio Language ’’by pressing
the ▼or▲ button. You will see the
submenu next to ‘‘Audio Language. ’’
Follow the same instructions you
used to set the menu language.
Rear Entertainment System25608/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 261 of 489
Subtitle LanguageYou can select the subtitle language
before playing DVDs.
Select‘‘Subtitle Language ’’by
pressing the ▼or▲ button. You will
see the submenu next to the
‘‘ Subtitle Language. ’’
Follow the same instructions you
used to set the menu language.
INITIAL SETTINGS (Others)When you select ‘‘Others ’’at the top
of the ‘‘INITIAL SETTINGS ’’screen,
the above menu appears on the
screen. Dynamic Range
‘‘
Dynamic Range ’’reduces the
differences between the loud and
quiet sound levels throughout the
disc. When this is on, the louder
sounds are lowered, and quieter
sounds are increased.
CONTINUED
Rear Entertainment System
257
Feat ures
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 262 of 489
When you select the‘‘Dynamic
Range ’’by pressing the ▼or▲
button, you will see the submenu
next to the ‘‘Dynamic Range ’’as
shown above.
To turn ‘‘Dynamic Range ’’on or off,
select ‘‘ON ’’or ‘‘OFF ’’by pressing
the
or
button. Angle Mark
When you switch to another angle
while playing a DVD, the angle mark
is displayed in the upper right corner
of the screen.
You can set the system to display or
not display this angle mark.
Select
‘‘Angle Mark ’’by pressing the
▼ or▲ button. The above submenu
appears. If you want the angle mark
to be displayed, select ‘‘ON ’’with the
or
button.
ANGLE MARK
Rear Entertainment System25808/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 263 of 489
Parental Level
You can place an auditory restriction
by changing the parental control
level. The higher the level number,
the lower the restriction.
Highlight‘‘Parental Level ’’and press
the ENT button. You will see the
submenu. If you select ‘‘No ’’and
press the ENT button, the screen
goes back to the ‘‘Others ’’menu.
When you select and enter ‘‘Yes, ’’the
display changes as shown above. To
change the level, you need to enter
your four digit password. Select the
number for the first digit by pressing
the ▼,▲ ,
,or
button, and
enter it by pressing the ENT button.
Repeat this until all four digits are
filled. When you enter the fourth
number, the cursor automatically
moves to ‘‘ENT ’’on the display.
Press the ENT button on the control
panel.
CONTINUED
Rear Entertainment System
259
Feat ures
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Page 264 of 489
If the system does not recognize the
password you entered, you will see
the above display. Repeat the
parental control level steps until you
enter the correct password.
If you enter the password correctly,
you can then change the parental
control level.
Once you correctly enter the
password, press the
or
button to
change the level, and then press the
ENT button to enter your selection. Changing the Password
The password was set to
‘‘1111 ’’
when the vehicle left the factory.
Rear Entertainment System26008/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX