2008 TOYOTA SIENNA Owners Manual

08 SIENNA_U (L/O 0801)
401
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
If the center panel does not contact your
garage door opener transmitter:
Check to see if spacer is on the cor-
rect pin.
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
Keep the remaining spacers away
from children.
To use the auxiliary box, open the lid
as shown in the following illustrations.
Type C—The plate in the center of the
auxiliary box can be adjusted or removed
as shown in the illustration.
Type I—For details, see “Front seat side
table” on page 412 in this Section.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the auxiliary box
closed while driving.
Type A—As these holders are de-
signed for holding a light object
such as an eyeglass, do not place
any heavy objects in them. Heavy
objects may cause the holder to
open and contents to fly out result-
ing in injuries.
NOTICE
Type A—During hot weather, the inte-
rior of the vehicle becomes very hot.
Do not leave anything flammable or
deformable such as a lighter, glasses,
etc. inside.
Auxiliary boxes

08 SIENNA_U (L/O 0801)
402
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Type A (driver’s side roof)
Type B (instrument panel)
Position 1Position 2
Type C (instrument panel without seat
heater switches)
Type D (instrument panel with seat heater
switches)
Type E (upper side of the glove box)

08 SIENNA_U (L/O 0801)
403
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Type F (front door)
Type G (quarter trim)
Type H (spare tire cover)
Type I (front seat side table)
Type J (rear side of console box)
Type K (front passenger’s seat)

08 SIENNA_U (L/O 0801)
404
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To use the coin holder, push the but-
ton.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop
while driving, keep the coin holder
closed when it is not in use.
The cup holder is designed for holding
cups or drinkcans. To use them, ob-
serve the following illustrations.
Type C and D—For details, see “Front
seat side table” on page 412 in this Sec-
tion.
Type G—For details, see “Removable con-
sole box” on page 407 in this Section.
CAUTION
Do not place anything else other
than cups or drinkcans in the cup
holder, as such items may be
thrown about and possibly injure
people in the vehicle during sudden
braking or in an accident.
Type A and F—To reduce the
chance of injury in case of an acci-
dent or a sudden stop while driv-
ing, keep the cup holder closed
when it is not in use.
Type A (instrument panel)
Type B (quarter trim)
Coin holderCup holders

08 SIENNA_U (L/O 0801)
405
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Type C (front side of the front seat side
table)
Type D (rear side of the front seat side
table)
Type E (front side of console box)
Type F (rear side of console box)

08 SIENNA_U (L/O 0801)
406
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Type G (console box tray)Front door
Sliding door
The bottle holders are designed to hold
bottles securely.
CAUTION
Do not attempt to use the holder for
any other purpose for which it was
intended. Inappropriately sized or
shaped objects may be thrown about
in the compartment and possibly in-
jure people in the vehicle during a
sudden braking or an accident.
NOTICE
Do not put a cup or open bottle in
the bottle holder because the con-
tents may spill when the door opens
or closes.
Bottle holders

08 SIENNA_U (L/O 0801)
407
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
This box is designed to place things
like bottles.
UPPER TRAY
To access the upper tray, raise the con-
sole box lid.
Storage boxRemovable console box

08 SIENNA_U (L/O 0801)
408
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
CONSOLE BOX
To access the console box, pull up the
lock release lever and raise the console
box lid.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the console box closed
while driving.
Between the front seats
Between the second seats
REMOVING AND INSTALLING THE
CONSOLE BOX
The console box can be removed and
installed between the front seats and
between the second seats as shown in
the illustrations.
When the console box is installed in the
second seat position, the right side sec-
ond seat must be in the outside position.