2008 TOYOTA SIENNA Owners Manual

Page 185 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
177
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To turn on the emergency flashers,
push the switch.
All the turn signal lights will flash. To turn
them off, push the switch onc

Page 186 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
178
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
NOTICE
To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not

Page 187 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
179
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Personal light main switch
To turn on the front personal lights,
operate the personal light main switch.
The lights can be turne

Page 188 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
180
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
The following adjustments  can be made in
this system. For details, contact your
Toyota dealer.
Cancelling the door key or the

Page 189 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
181
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
Personal light main switch
To turn on the luggage compartment
light, push the luggage compartment
light switch upwards. The ligh

Page 190 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
182
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
When any of the side doors or back door
is unlocked using either  the key  or the
wireless remote control transmitter, the
light

Page 191 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
183
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To turn on the windshield wipers, move
the lever to the desired setting.
The engine switch must be in the “ON”
position.Leve

Page 192 of 572

TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual 08 SIENNA_U (L/O 0801)
184
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
To turn on the rear window wiper, twist
the lever knob upward.
The engine switch must be in the “ON”
position.Lever position