2008 TOYOTA LAND CRUISER Automatic

252
3−1. Using the air conditioning system and defogger
Rear air conditioning system
Using the automatic mode
Press .
The air conditioning system will begin to operate. Air outlets and fan
speed are automatically adjusted according to the temperature set−
ting.
Press “ ” to increase the temperature and “ ” to decrease the
temperature on .
The temperature for the right−hand and left−hand rear seats can be
set separately.
Airflow and outlets are automatical ly adjusted according to the tem
perature setting.
Left side temperature controlLeft side temperature setting displayFan speed display Airflow display
Right side temperature setting display
Right side temperature control
Off Changes
the air
outlets used
Fan speed
Automatic mode
STEP1
STEP 2

257
3−1. Using the air conditioning system and defogger
3
Interior features
W indshield wiper de−icer
nThe windshield wiper deicer can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
CAUTION
nWhen the windshield wiper deicer is on
Do not touch the glass at the lower part of the windshield or to the side of the
front pillars as the surfaces can become very hot and burn you.
This feature is used to prevent ice from building up on the wind
shield and wiper blades.
With navigation system
On/off
The windshield wiper de−icer
will automatically turn off after
approximately 15 minutes.
Pressing the switch again also
turns the de−icer off.
Without navigation system

270 3−2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1
second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press
(RAND),
(RPT) or again.
nError messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up−side down.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
CDs with copy−protect features may not play correctly.
nCD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
n
If CDs are left inside the CD pla yer or in the ejected position for
extended periods
CDs may be damaged and may not play properly.
n
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.

276 3−2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1
second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press
(RAND),
(RPT) or again.
nError messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up−side down.
“NO MUSIC”: This indicates that the MP3/WMA file is not included in the
CD.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
nCD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
n
If CDs are left inside the CD pla yer or in the ejected position for
extended periods
CDs may be damaged and may not play properly.

280
3−2. Using the audio system
Optimal use of the audio system
Using the AUDIO CONTROL function
nChanging modes
Pressing selects the mode to be change in the following
order.
“BAS”
“MID” “TRE” “FAD” “BAL”
“ASL” Displays the current mode
Changes the following set−
tings
Sound quality and vol−
ume balance
The sound quality and bal−
ance setting can be
changed to produce the
best sound.
Automatic Sound Level−
izer on/off
TUNEFILE
PUSHAUDIO CONTROL
TUNEFILE
PUSHAUDIO CONTROL
ITY32C011

281
3−2. Using the audio system
3
Interior features
nAdjusting sound quality
Turning adjusts the level.
*: The sound quality level is adjusted individually in each radio, cassette
tape or CD mode.
nAdjusting the Automatic Sound Levelizer (ASL)
Turning to the right turns on the ASL, and turning to
the left turns off the ASL.
ASL automatically adjusts the volume and tone quality according to the
noise level as you drive your vehicle.
Sound quality
mode
Mode
displayedLevelTurn to theleftTurn to the
right
Low−pitched
tones
*BAS−5 to 5
Low High Mid−pitched
tones
*MID−5 to 5
High pitched
tones
*TRE−5 to 5
Front/rear
volume balanceFAD F7 to R7 Shifts to rearShifts to
front
Left/right volume
balance
BAL L7 to R7 Shifts to left Shifts to right

292
3−3. Using the rear seat entertainment system
Using the radio
Selecting a preset station
Press or on until the desired station band appears on the
screen.
Tuning the station
Press or on until the desired station appears on the screen.
Press or on and the stations w ill be searched automatically
one after another.Select radio mode on the
source screen to display the
control screen.

324 3−3. Using the rear seat entertainment system
Automatic closing of the rear display
Press .
If is on, the display
will automatically close when the
“ENGINE START STOP” switch is
turned to OFF mode.
The display will automatically
open when the “ENGINE START
STOP” switch is turned to
ACCESSORY or IGNITION ON
mode.
Displaying the map screen
Press .
The map screen will appear.