2008 TOYOTA LAND CRUISER ignition

TABLE OF CONTENTSIndex
2
11. Key information .................. 24
Keys ..................................... 24
12. Opening, closing and
locking the doors ............. 26
Smart key system ................. 26
Wireless remote control ....... 40
Side doors ............................ 43
Back door ............................. 48
13. Adjustable components
(seats, mirrors, steering
wheel) ................................ 51
Front seats ........................... 51
Rear seats ............................ 53
Driving position memory
system ................................ 62
Head restraints ..................... 65
Seat belts ............................. 69
Steering wheel ..................... 77
Inside rear view mirror .......... 79
Outside rear view mirrors ..... 80
14. Opening and closing the
windows and moon
roof .................................... 83
Power windows .................... 83
Moon roof ............................. 86
15. Refueling ............................. 89
Opening the fuel tank cap .... 8916. Theft deterrent system ....... 93
Engine immobilizer
system ................................ 93
Alarm .................................... 97
Theft prevention labels ......... 99
17. Safety information ............ 100
Correct driving posture ....... 100
SRS airbags ....................... 102
Front passenger occupant
classification system ......... 117
Child restraint systems ....... 123
Installing child restraints ..... 127
21. Driving procedures ........... 140
Driving the vehicle .............. 140
Engine (ignition) switch ....... 149
Automatic transmission ...... 153
Turn signal lever ................. 158
Parking brake ..................... 159
22. Instrument cluster ............ 160
Gauges and meters ............ 160
Indicators and warning
lights ................................. 163
Multi−information display ..... 166
23. Operating the lights and
wipers .............................. 170
Headlight switch ................. 170
Fog light switch ................... 172
Windshield wipers and
washer .............................. 173
1Before driving
2When driving

16
Pictorial indexInstrument panel
C
Engine (ignition) switchP. 149
VSC OFF switchP. 201
Four−wheel drive control switchP. 190
Center differential lock/unlock
switchP. 190

35
1−2. Opening, closing and locking the doors
1
Before driving
AlarmSituation Correction procedure
Interior alarm
sounds continu−
ously
*1
When the “ENGINE
START STOP” switch is in
IGNITION ON or ACCES−
SORY mode, an attempt
was made to open the
door and exit the vehicle,
and the shift lever was not
in “P”Shift the shift lever to
“P” and turn the
“ENGINE START
STOP” switch OFF
Interior and exte−
rior alarms sound
continuously
*1
When the “ENGINE
START STOP” switch is in
IGNITION ON or ACCES−
SORY mode, the driver ’s
door was closed after the
key was carried outside
the vehicle, and the shift
lever not in “P”Shift the shift lever to
“P”, turn the “ENGINE
START STOP” switch
OFF and close the
driver ’s door again
Interior alarm
pings once
*1
The electronic key has a
low batteryReplace the electronic
key battery
An attempt was made to
start the engine without the
electronic key being
present, or the electronic
key was not functioning
normallyStart the engine with
the electronic key
present*
2

44 1−2. Opening, closing and locking the doors
Locking the driver ’s doors from the outside without a key
Move the inside lock button to the lock position.
Close the door.
The door cannot be locked if the “ENGINE START STOP” switch is in
ACCESSORY or IGNITION ON mode, or the electronic key is left
inside the vehicle.
The key may not be detected correctly and the door may be locked.
Rear door childprotector lock
The door cannot be opened from
inside the vehicle when the locks
are set.
These locks can be set to prevent
children from opening the rear
doors. Press down rear door
switches to lock the rear doors.
STEP1
STEP 2
ITY12C032

45
1−2. Opening, closing and locking the doors
1
Before driving
Automatic door locking and unlocking systems
The following functions can be set or canceled:
nSetting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
Close all the doors and switch the “ENGINE START STOP”
switch IGNITION ON mode. (Perform step 2 within 20 sec−
onds.)
Shift the shift lever to “P” or “N”,
press and hold the driver ’s door
lock switch (
or) for 5 sec−
onds then release.
The shift lever and switch posi−
tions corresponding to the
desired function to be set or can−
celed are shown as follows.
Function Operation
Shift position linked
door locking functionShifting the shift lever out of “P” locks all
doors.
Shift position linked
door unlocking functionShifting the shift lever to “P” unlocks all
doors.
Speed linked door lock−
ing functionAll doors are locked when the vehicle speed is
approximately 12 mph (20 km/h) or higher.
Driver ’s door linked door
unlocking function
All doors are unlocked when the driver ’s door
is opened within 10 seconds after turning the
“ENGINE START STOP” switch OFF.
STEP1
STEP 2

62
1−3. Adjustable components (seats, mirrors, steering wheel)
Driving position memor y system
Your preferred driving position (th e position of the driver ’s seat,
steering wheel and outside rear view mirrors) can be entered into the
computer ’s memory and recalled with
the touch of a button. It is also
possible to set this function to activate automatically when the
doors are unlocked.
Three different driving positions can be entered into memory.
nEntering a position to memory
Check that the shift lever is set in “P”.
Switch to IGNITION ON mode.
Adjust the driver ’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
While pressing the “SET” but−
ton, press button “1”, “2” or “3”
until the signal beeps.
If the selected button has
already been preset, the previ−
ously recorded position will be
overwritten.
nRecalling the memorized position
Check that the shift lever is set in “P”.
Switch to IGNITION ON mode.
Press button “1”, “2” or “3” to
recall the desired position.
STEP1
STEP 2
1SET23
1SET23
ITY13C036
STEP3STEP 3
STEP 1
1SET23
1SET23
ITY13C038
STEP2

77
1
1−3. Adjustable components (seats, mirrors, steering wheel)
Before driving
Steering wheel
Auto tilt away and auto return
When the “ENGINE START
STOP” switch is OFF, the steer−
ing wheel returns to its stowed
position by moving up and away
to enable easier driver entry and
exit.
Switching to ACCESSORY or
IGNITION ON mode will return
the steering wheel to the original
position. The steering wheel can be adjusted to a comfor table position while
the “ENGINE START STOP” switch is in ACCESSORY or IGNITION
ON mode.
Up
Down
Toward the driver
Away from the driver4
1
2
3
ITY13C064
ITY13C066

79
1
1−3. Adjustable components (seats, mirrors, steering wheel)
Before driving
Inside rear view mir ror
nTo prevent sensor error
CAUTION
nWhile driving
Do not adjust the position of the mirror.
Doing so may lead to mishandling of the vehicle and an accident, or result−
ing in death or serious injury.
In auto mode, sensors are used to detect the headlights of vehicles
behind and automatically
reduces the reflected light.
Turns auto mode on/off
The indicator comes on when
auto mode is turned on.
The mirror will revert to the
auto mode each time the
“ENGINE START STOP”
switch is turned to IGNITION
ON mode.
To ensure correct functioning of the sen−
sors, do not touch or cover the sensors.
ITY13C080