2008 TOYOTA LAND CRUISER Navigation Manual

ADVANCED FUNCTIONS
85 
To resume guidance
1. Push the “MENU” button.
4U5551T
2. Touch “Resume Guidance”.
The screen will change to the current posi-
tion map with route guidance.
Volume
The voice guidance volume can be ad-
justed or switched off.
1. Push the “MENU” button.
4U5552T
2. Touch “Volume”.
To adjust the volume, select the desired
level by touching the appropriate number.
If voice guidance is not needed, touch
“OFF” to disable the feature.
When selected the number or “OFF” will
be highlighted.
3. Touch “OK” to confirm your selec-
tion.

ADVANCED FUNCTIONS
86
INFORMATION
During route guidance, the voice
guidance continues even if the navi-
gation screen is changed to other
screens.
“Adaptive Volume Control”: By turning
“Adaptive Volume Control” on, the volume
is turned up automatically when the ve-
hicle speed exceeds 50 mph (80 km/h).
To turn the “Adaptive Volume Control”
system on, touch the button. The indicator
will be highlighted.
User selection
The system can memorize the following
settings for up to three users.
Map direction
Map scale
Map configuration
Guidance mode
Setup
Volume
Language
Route trace
Travel time/arrival time
Right screen of dual map
Road preference
Maintenance notification

ADVANCED FUNCTIONS
87
1. Push the “MENU” button.
4U5553T
2. Touch “Select User”.
To register
1. Touch “Memorize”.
The confirmation screen will be displayed.
2. To register, touch “Yes”. To return to
the previous screen, touch “No” or
.
When a button that is already registered is
touched, the following screen appears.
To replace, touch “Yes”. To cancel the re-
placement, touch “No” or
.

ADVANCED FUNCTIONS
88 
To change user
Touch “User number”.
The above message appears, then the
map screen will be displayed.
To delete user
1. Touch “Delete”.
The confirmation screen will be displayed.
2. To delete, touch “Yes”. To return to
the previous screen, touch “No” or
.

ADVANCED FUNCTIONS
89
My places —
Points or areas on the map can be regis-
tered.
The registered points can be used on the
“Destination” screen. (See “ — Destination
search by Home” on page 42, “ — Destina-
tion search by Quick access” on page 42
and “ — Destination search by Memory” on
page 53.)
Registered areas are avoided at the time of
route search.
1. Push the “MENU” button.
4U5554T
2. Touch “My Places”.
On this screen, the following operations
can be performed.
1Registers memory points
(See “ — Registering memory points”
on page 90.)
2Edits memory points
(See “ — Editing memory points” on
page 91.)
3Deletes memory points
(See “ — Deleting memory points” on
page 95.)
4Registers or deletes home
(See “ — Registering home” on page
96 or “ — Deleting home” on page
97.)
5Registers areas to avoid
(See “ — Registering area to avoid”
on page 97.)
6Edits areas to avoid
(See “ — Editing area to avoid” on
page 98.)
7Deletes areas to avoid
(See “ — Deleting area to avoid” on
page 101.)
8Deletes previous points
(See “ — Deleting previous points” on
page 101.)
9Number of remaining memory
points
10Number of remaining areas to
avoid

ADVANCED FUNCTIONS
90
1. Push the “MENU” button.
2. Touch “My Places” on the “Menu”
screen.
3. Touch “Register”.
4. Enter the location in the same way
as for a destination search. (See “Des-
tination search” on page 39.)
After memory point registration is com-
pleted, the “Memory Point” screen will be
displayed.
5. Touch “OK”.
To edit registered information, see “ —
Editing memory Points” on page 91.
INFORMATION
Up to 106 memory points can be reg-
istered.
— Registering memory
points

ADVANCED FUNCTIONS
91
— Editing memory points
The icon, attribute, name, location and/or
telephone number of a registered memory
point can be edited.
1. Push the “MENU” button.
2. Touch “My Places” on the “Menu”
screen.
3. Touch “Edit”.
4. Touch the desired memory point
button.
5. Touch the button to be edited.
“Icon”: To select icons to be displayed on
the map. (See page 92.)
“Quick Access”: To set an attribute.
Memory points with a set attribute can be
used as a “Quick access” or “Home” but-
ton. (See page 93.)
“Name”: To edit memory point names.
The names can be displayed on the map.
(See page 94.)
“Location”: To edit location information.
(See page 94.)
“Phone #”: To edit telephone numbers.
(See page 95.)
6. Touch “OK”.

ADVANCED FUNCTIONS
92 
To change “Icon”
1. Touch “Icon” on the “Memory
Point” screen.
2. Touch the desired icon.
Turn the page by touching “Page 1”,
“Page 2” or “with Sound”.SOUND ICONS
When the vehicle approaches the memory
point, the selected sound will be heard.
1. Touch “with Sound” on the “Change
Icon” screen.
2. Touch the desired sound icon.
The next screen appears when “Bell (with
Direction)” is touched.
Touch either or to adjust the
direction. Touch “Enter”.
The bell sounds only when the vehicle ap-
proaches this point in the direction that has
been set.