2008 TOYOTA LAND CRUISER phone

BASIC FUNCTIONS
30
Up to 106 memory points can be regis-
tered. If there is an attempt to register
more than 106, a message appears for
confirmation.
To see information about the icon
where the cursor is set
To display information about an icon, set
the cursor on it.POI INFORMATION
When the cursor is set on a POI icon, the
name and “Info.” are displayed on the top
of the screen.
Touch “Info.”.
Information such as the name, address,
position and phone number are displayed.
If “Enter
” is touched, the position of the
cursor is set as a destination.
If there is already a set destination, “Add
to
” and “Replace ” are displayed.
“Add to
”: To add a destination.
“Replace
”: To delete the existing des-
tinations and set a new one.
To register this POI as a memory point,
touch “Mark”. (See “—Registering
memory points” on page 90.)
If
is touched, the registered telephone
number can be called.
INFORMATION
The desired Point of Interest can be
displayed on the map screen. (See “
— Display POI icons” on page 74.)

BASIC FUNCTIONS
31
MEMORY POINT INFORMATION
When the cursor is set on a memory point
icon, the name and “Info.” are displayed
on the top of the screen.
Touch “Info.”.
Information such as the name, address,
position and phone number are displayed.
If “Enter
” is touched, the position of the
cursor is set as a destination.
If there is already a set destination, “Add
to
” and “Replace ” are displayed.
“Add to
”: To add a destination.
“Replace
”: To delete the existing des-
tinations and set a new one.
To edit a memory point, touch “Edit”. (See
“ — Editing memory points” on page 91.)
To delete a memory point, touch “Delete”.
If
is touched, the registered telephone
number can be called.DESTINATION INFORMATION
When the cursor is set on a destination
icon, the name and “Info.” are displayed
on the top of the screen.
Touch “Info.”.
Information such as the name, address,
position and phone number are displayed.
To delete a destination, touch “Delete”.
If
is touched, the registered telephone
number can be called.

SECTION 2
DESTINATION SEARCH
37
DESTINATION SEARCH
Destination search
Quick reference (“Destination” screen) 38. . . . . . . . . . . . . . . . . . . .
Destination search 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the search area40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by Home42 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by Quick access42 . . . . . . . . . . . . . . . . . . . .
Destination search by “Address”43 . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “POI* Name” 46. . . . . . . . . . . . . . . . . . . . .
Destination search by “POI* Category” 49. . . . . . . . . . . . . . . . . .
Destination search by “Emergency”52 . . . . . . . . . . . . . . . . . . . . .
Destination search by “Memory”53 . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Previous”53 . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Map”54 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination search by “Intersection”54 . . . . . . . . . . . . . . . . . . . .
Destination search by “Freeway Ent./Exit”55 . . . . . . . . . . . . . . .
Destination search by “Coordinates”56 . . . . . . . . . . . . . . . . . . . .
Destination search by “Phone #”57 . . . . . . . . . . . . . . . . . . . . . . .
Starting route guidance 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*: Point of Interest

DESTINATION SEARCH
39
8“Intersection”
The names of two intersecting streets can
be entered. This is helpful if only the gen-
eral vicinity, not the specific address, is
known. 54. . . . . . . . . . . . . . . . . . . . . . . . . . .
9“Freeway Ent./Exit”
The name of a freeway (interstate) en-
trance or exit can be entered. 55. . . . . . .
10“?”
Function help for the “Destination” screen
can be viewed on this screen. 27. . . . . . .
11“Change”
To change the search area, touch this but-
ton. 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12Quick access touchscreen but-
tons
One of 5 preset destinations can be se-
lected by touching the screen directly. To
use this function, it is necessary to set the
“Quick Access” for each memory point.
(To register a “Quick Access”, see “ —
Editing memory points” on page 91.)
42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13Home touchscreen button
A personal home address can be selected
without entering the address each time. To
use this function, it is necessary to set
“Home” for the memory point. (To register
“Home”, see “ — Registering home” on
page 96.) 42. . . . . . . . . . . . . . . . . . . . . . . . .
14“Phone #”
A destination can be entered by the tele-
phone number. 57. . . . . . . . . . . . . . . . . . . .
15“Coordinates”
A destination can be set by using latitude
and longitude as coordinates. 56. . . . . . .
Destination search —
Push the “DEST” button and the “Des-
tination” screen appears.
You can use one of 13 different methods to
search your destination. (See pages 42
through 57.)
INFORMATION
When searching the destination, the
response to the touchscreen button
may be slow.

DESTINATION SEARCH
57
1. Push the “DEST” button.
2. Touch “Phone #” on the second
page of the “Destination” screen.
3. Input a telephone number.
4. After inputting a telephone number,
touch “OK”.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 57.)
If there is more than one site having the
same number, the following screen will be
displayed.
INFORMATION
If there is no match for the tele-
phone number inputted, a list of
identical numbers with different
area codes will be displayed.
To set a memory point as a destina-
tion using the phone number, the
number must be registered pre-
viously. (See page 95.)
Starting route guidance
After inputting the destination, the screen
changes and displays the map location of
the selected destination and the route pref-
erence.
1. When an arrow facing the desired
point is touched, the map scrolls in that
direction.
Releasing the finger from the arrow will
stop the scrolling.
2. Touch “Enter”.
The system starts route search and dis-
plays recommended routes.
If there is already a set destination, “Add
to
” and “Replace ” are displayed.
“Add to
”: To add a destination.
“Replace
”: To delete the existing des-
tinations and set a new one.
“Route Preference”: To change the route
preference. (See page 59.)
“Info.”: If this button is displayed on the
top of the screen, touch it to view items
such as name, address, and phone num-
ber.
— Destination search by
“Phone #”

ADVANCED FUNCTIONS
91
— Editing memory points
The icon, attribute, name, location and/or
telephone number of a registered memory
point can be edited.
1. Push the “MENU” button.
2. Touch “My Places” on the “Menu”
screen.
3. Touch “Edit”.
4. Touch the desired memory point
button.
5. Touch the button to be edited.
“Icon”: To select icons to be displayed on
the map. (See page 92.)
“Quick Access”: To set an attribute.
Memory points with a set attribute can be
used as a “Quick access” or “Home” but-
ton. (See page 93.)
“Name”: To edit memory point names.
The names can be displayed on the map.
(See page 94.)
“Location”: To edit location information.
(See page 94.)
“Phone #”: To edit telephone numbers.
(See page 95.)
6. Touch “OK”.

ADVANCED FUNCTIONS
95 
To change “Phone #” (telephone
number)
1. Touch “Phone #” on the “Memory
Point” screen.
2. Enter the number using number
keys.
3. Touch “OK”.
The previous screen will be displayed.1. Push the “MENU” button.
2. Touch “My Places” on the “Menu”
screen.3. Touch “Delete”.
4. Touch the button to be deleted.
“Delete All”: To delete all memory points
in the system.
5. To delete the memory point, touch
“Yes”. To cancel the deletion, touch
“No”.
— Deleting memory points

SECTION 5
OTHER FUNCTIONS
11 3
OTHER FUNCTIONS
Other functions
Maintenance information 114. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance information setting11 4 . . . . . . . . . . . . . . . . . . . . . . .
Dealer setting 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar with memo 118. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a memo120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing a memo121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo list121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hands−free system (for cellular phone) 123. . . . . . . . . . . . . . . . . . .
Enter a Bluetooth phone127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call on the Bluetooth phone130 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receive on the Bluetooth phone137 . . . . . . . . . . . . . . . . . . . . . . .
Talk on the Bluetooth phone138 . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the setting of the Bluetooth phone 140. . . . . . . . . . . .
Speech command system 171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help screen 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock adjustment 174. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen adjustment 176. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen setting 178. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Beep setting 181. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a language 181. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .