2008 TOYOTA LAND CRUISER Navigation Manual

OTHER FUNCTIONS
165
You can select the Bluetooth phone
from a maximum of 6 numbers.
“Empty” is displayed when you have not
registered a Bluetooth phone yet.
Bluetooth mark is displayed when you
choose the phone.
Although you can register up to 6
Bluetooth phones in the system, only one
Bluetooth phone can function at a time.
3. Touch “OK”.
When the result message is displayed, you
can use the Bluetooth phone.When another Bluetooth phone is trying
to connect, this screen is displayed.
Touch “Yes” or “No”.

OTHER FUNCTIONS
166 
Displaying Bluetooth information
You can see or set the information of the
Bluetooth phone on the system.
“Device Name”
The name of Bluetooth . . . . .
phone which is displayed on
the screen. You can change it
into a desired name.
“Bluetooth* Device Address”
The address peculiar to the . . . . .
system. You cannot change it.
1. Select the desired phone and touch
“Information”.
*: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
2. Touch “Change”.
3. When you complete the setting,
touch
.

OTHER FUNCTIONS
167 
Changing a device name
You can change a device name. If you
change a device name, the name regis-
tered in your cellular phone is not
changed.
1. Touch “Change”.
2. Use the software keyboard to input
the device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth information on the system.
The information displays the following
items.
“Device Name”
The name in the Bluetooth . . . . .
network. You can change it.
“Passkey”
The password when you regis- . . . . .
ter your cellular phone in the
system. You can change it into
the figure of 4−8 digits.
“Bluetooth* Device Address”
The address peculiar to the . . . . .
system. You can not change it.
If you have registered two
Bluetooth phones with the
same Device Name or Pass-
key and you cannot distinguish
one from the other, refer to it.
*: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
168
When you change the device name or
Passkey, do the followings.
1. Touch “Bluetooth*”.
2. Touch “Change” of “Device Name”
or “Passkey”.
*: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
3. Use the software keyboard to input
the device name.
You can input up to 20 characters.
4. Input a Passkey with 4 8 digits.
When you touch , the input number is de-
leted.
5. When you complete the setting,
touch
.

OTHER FUNCTIONS
169 
Initializing the Bluetooth settings.
You can initialize the settings.
1. Touch “Default”.
2. Touch “Yes”.
Deleting a Bluetooth phone
1. Touch “Delete” of “Bluetooth* Tele-
phone”.
2. Select the telephone you want to de-
lete and touch “OK”.
3. Touch “Yes”.
*: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
170
When you delete the telephone while
another Bluetooth phone is connect-
ing, this message is displayed.
Touch “Yes”.
Displaying the information of the
Bluetooth phone you delete
You can display the information of the
Bluetooth phone before you delete it
and you can make sure whether the
telephone you delete is correct or not.
1. Select the telephone you want to
display the information about.
2. When you complete confirming it,
touch
.

OTHER FUNCTIONS
171
The speech command system enables
you to operate the navigation system,
audio system and air conditioning sys-
tem by giving a command.
1. Push the talk switch.
A beep sounds and on screen message is
displayed with an indicator at the top left.
2. Give a command while an indicator
is shown in the display.
If you want to check the command list,
touch “Help” to display the help screen.
(See “Help screen” on page 173.) When
you touch “Cancel”, the previous
screen returns.
If the navigation system does not respond
or the confirmation screen does not disap-
pear, please push the talk switch and try
again.
If no command is given, a beep sounds
and the indicator disappears 6 seconds
later.
If the system does not recognize your
speech, the system will respond with this
message (“System does not recognize
this command, please rephrase your com-
mand.”). Start the operation from the be-
ginning.
Speech command system

OTHER FUNCTIONS
172
Microphone
It is unnecessary to speak directly into
the microphone when giving a com-
mand.Speech command example: Searching
for a route to your home.
1. Push the talk switch.
2. Say “Home”.
If your home is not registered, you will hear
“Home is not registered”.
3. If the system recognized the com-
mand, the recognition result “Home” is
displayed on the top of the screen with
the screen message. (Displayed mes-
sage and the touchscreen buttons on
the screen depend on the situation.)
Touch or say “Cancel”, and the system will
be canceled. Touch or say “Help”, and dis-
plays the “Help” screen.
4. Touch “Enter” or say “Enter des-
tination”, and the system starts search-
ing for a route to your home. (If the des-
tination is already registered, “Add to
” or “Replace ” is displayed on the
screen.)
Touch or say “Cancel”, and the search will
be canceled.