2008 SUBARU LEGACY key

87
Stored Locations
(Previous Destination):
Use this function to delete previously stored destinations and waypoints. (See page
102.)
(Preset Destinations):
You can program a maximum of five destinations to keys for easy retrieval later on.
(See page 104.)
(Display memory point icons):
Selecting this key allows you to display icons for memory points.
(Calculate):
Selecting this key prompts the start of route calculation.
Each of the above six functions has some or all of the following four standard editing functions (see the table below):
(add):You can store a new location into memory.
(list):You can see a list of the stored locations.
(delete):You can delete stored locations.
(delete all):You can delete all stored locations.

88
Editing keys displayed for each function are as follows:
The numbers in parentheses following the function names indicate the maximum locations you can store in the memory.
Stored Locations
Memory
Points (100)
Home (1)
Dest. & Way Pt.
(Destination: 1
Way Point: 5)
Preset Dests.
(5)
Avoid Area
(10)
Previous Dest.
(100)

92
3
Select the memory point to be modified.You can change the sequence in which memory points are listed by selecting
(distance), (icon), (name), or (date).
4
Select the category key corresponding to the memory point to be
modified.
(icon):Selecting this key allows you to choose a display icon. and
of the CHANGE ICON screen contain
standard icons, whereas the “With Sound” (with sound) page contains
icons that are accompanied by response sounds. Select (with
sound) to listen to these sounds.
NOTE
The “With direction” ( / ) keys in the “With Sound” page are used to activate response
sounds only when you come near the memory point from the specified direction. Select or
and set the direction using or .
Stored Locations

93
Stored Locations
(category):Use this key to change the storage category. After selecting
this key, select the key of the new category.
(name):Select this key to change the name of a memory point. When
the change has been completed, select (OK). Then select
(on) if the name is to be displayed on the map, or
(off) if it is not to be displayed.
(position):Select this key to review the memory points and modify a
memory point on the map screen. After checking or modifying
it, select (OK).
(telephone):Select this key to modify a telephone number. When the
modification has been completed, select (OK).

99
Stored Locations
■Reviewing and modifying avoid areasUsing this function, you can review the stored avoid areas in the form of a list and modify them if necessary.1
Select (list).
2
Select the avoid area to be modified.
3
Select the key corresponding to the item to be modified.For details regarding the function of each key, refer to “Reviewing and modifying
memory points” on Page 91.
NOTE
The methods for deleting individual and all avoid areas are the same as those described on Page 94 and 95 for memory points.Press the button or select , then select (stored locations), and then select
(avoid area
).

102
Previous destination (deleting stored locations)Use this function to delete previously set destinations.
1
Select (delete).If (all delete) is selected, all previously set destinations will be deleted.
2
Select the destination to be deleted.
:Use this key to display up to five previous destinations.
:Use this key to display the previous destination.
:Use this key to display the next destination.
:Use this key to display up to five of the next destinations.
(name):Use this key to search through the list by name (alphabetical search).
(date):Use this key to search through the list by date.
Stored Locations
Press the button or select , then select (stored locations), and then select
(previous
destinations
).

104
Preset destinations
■Storing preset destinations Using this function, you can program up to five frequently used destinations to keys for single-action retrieval later
on.1
Select (add).
2
Select the desired key from preset keys 1through 5.
Stored Locations
Press the button or select , then select (stored locations), and then select
(preset
destinations
).

106
■Reviewing and modifying preset destinationsUsing this function, you can review the preset destinations in the form of a list and modify them if necessary.1
Select (list).
2
Select any one of keys 1through 5according to your modification
requirements.
Stored Locations
Press the button or select , then select (stored locations), and then select
(preset
destinations
).