2008 SUBARU LEGACY Navigation Manual

88
Editing keys displayed for each function are as follows:
The numbers in parentheses following the function names indicate the maximum locations you can store in the memory.
Stored Locations
Memory
Points (100)
Home (1)
Dest. & Way Pt.
(Destination: 1
Way Point: 5)
Preset Dests.
(5)
Avoid Area
(10)
Previous Dest.
(100)

89
Stored Locations
Memory points
■Storing new memory pointsMemory points can be stored into any of the four categories of storage locations.1
Select the storage location category for the memory point you wish to
add.
2
Select (add).
Press the button or select , then select (stored locations), and then select
(memory
points
).

90
3
Set the memory point using the preferred method available on the
displayed screen.
NOTEUp to 100 memory points can be stored. Once that number has been reached, you must delete memory points that you no longer require
(see Page 94) before you can store new memory points. The number of memory points you can store is indicated on the screen.
Stored Locations

91
Stored Locations
■Reviewing and modifying memory points Using this function, you can review the stored memory points in the form of a list on the screen and modify
names, icons, telephone numbers, and other memory point data.1
Select the category of the memory point to be modified.
2
Select (list).
Press the button or select , then select (stored locations), and then select
(memory
points
).

92
3
Select the memory point to be modified.You can change the sequence in which memory points are listed by selecting
(distance), (icon), (name), or (date).
4
Select the category key corresponding to the memory point to be
modified.
(icon):Selecting this key allows you to choose a display icon. and
of the CHANGE ICON screen contain
standard icons, whereas the “With Sound” (with sound) page contains
icons that are accompanied by response sounds. Select (with
sound) to listen to these sounds.
NOTE
The “With direction” ( / ) keys in the “With Sound” page are used to activate response
sounds only when you come near the memory point from the specified direction. Select or
and set the direction using or .
Stored Locations

93
Stored Locations
(category):Use this key to change the storage category. After selecting
this key, select the key of the new category.
(name):Select this key to change the name of a memory point. When
the change has been completed, select (OK). Then select
(on) if the name is to be displayed on the map, or
(off) if it is not to be displayed.
(position):Select this key to review the memory points and modify a
memory point on the map screen. After checking or modifying
it, select (OK).
(telephone):Select this key to modify a telephone number. When the
modification has been completed, select (OK).

94
■Deleting memory pointsYou can delete stored memory points by using this function.1
Select the category of the memory point to be deleted.
2
Select (delete).
3
Select the memory point to be deleted.
4
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
Stored Locations
Press the button or select , then select (stored locations), and then select
(memory
points
).

95
Stored Locations
■Deleting all memory pointsUsing this function, you can delete all memory points.1
Select the category of the memory points to be deleted.
2
Select (delete all).
3
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
Press the button or select , then select (stored locations), and then select
(memory
points
).