2008 Seat Leon 5D COMMUNICATION SYSTEM

Communication
16
Calling a name in the phone book
– Press button to talk Ÿpage 6, fig. 1 .
– After the tone, say the command SELECT NAMEAfter the system has recognised this command, you may select a stored entry
from the telephone book to call the required number. The system best recog-
nises names spoken by the person who stored the name.
Example of how to select a name from the internal phone book
A running dialogue can be cancelled at any time by pressing button to
talk.AF
CommandConditionMessageEffect
SELECT NAMEPhone is switched on, telephone book
contains entries.Dialogue
COMPANY XYZDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command repeat, back>Dialogue
DIALDialogue - The telephone number for
Company XYZ is being dialled
End of dialogue
AF

Communication17
Controls and equipment
Listening to the phone book
You can have the entries stored in the internal telephone book read out to you.
– Press button to talk Ÿpage 6, fig. 1. The beep tone indicates
that the system is ready.
– Say the command PLAY PHONE BOOK.After giving the command the system will read out the entries stored in the
phone book. Press the talk button as an entry is being read to select the
telephone number for that entry. Once the dialogue is complete and the
system is reactivated, you can also select an entry to call by specifying the
stored name.
Example of the PLAY PHONE BOOK command:
Example of how to select an entry:
To delete names from the phone book
You can delete entries from the internal phone book.
– Press the talk button Ÿpage 6, fig. 1 . The beep tone indi-
cates that the system is ready.
– After the tone, say the command DELETE NAME .After giving this command you can delete a stored entry from the internal tele-
phone book.
AFAF
CommandConditionMessageEffect
PLAY PHONE BOOKThe telephone book contains entries. Dialogue - The telephone book will
then be read out.
End of dialogue
CommandConditionMessageEffect
PLAY PHONE BOOKThe telephone book contains entries;
Press the talk button on hearing
the entry required.Dialogue - The selected name will be
repeated. The telephone number will
be dialled.
End of dialogue
AF
AF

Communication
18
Example of how to delete an entry from the phone book:
A running dialogue can be cancelled at any time by pressing button to
talk.
Note
•Say the command Repeat, if you would like to have the specified name
repeated by the system.
•If you then say No, the system will answer with and the dialogue
will be ended.
To delete the phone book
You can delete the entire phone book or single entries.
– Press the talk button Ÿpage 6, fig. 1 .
– After the tone, say the command DELETE PHONE BOOK.
After giving this command you can delete the entire internal phone book or
single entries as desired.
CommandConditionMessageEffect
DELETE NAMEThe telephone book contains entries.Dialogue
COMPANY XYZ pany XYZ?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No command repeat, back>Dialogue
Ye sDialogue
End of dialogue
AF
AF

Communication19
Controls and equipmentExample of how to delete the entire internal telephone book:
Example of how to delete one entry from the internal phone book:
CommandConditionMessageEffect
DELETE PHONE BOOKThe telephone book contains entries. phone book?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No commandDialogue
Ye sDialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No commandDialogue
Ye sDialogue - All entries in the phone
book will be deleted.
End of dialogue
CommandConditionMessageEffect
DELETE PHONE BOOKThe telephone book contains entries. phone book?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue
No command repeat>Dialogue
NODialogue - The telephone book will
then be read out.
No commandPress talk button on hearing the
entry to be deleted. (name)?>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.Dialogue

Communication
20
Notes on the phone book
Please remember these tips and suggestions when creating
a new entry.
•It is important that names stored in the phone book have a noticeable
acoustic difference between them so the system can recognise the entries.
•In the event that an telephone book entry is not recognised (e.g. if
someone else tries to call-up a name), the phone book entries can be read out
by giving the command PLAY PHONE BOOK.
•The numbers zero to nine are recognised by the system. Say the numbers
clearly so that the system can recognise them easily.
Should the system say , check the status of the
hands-free system as follows.
•Is the phone turned on?
•Has the PIN code been entered?
WARNING
The voice command system must not be used in cases of emergency, as the
voice changes in stressful situations. This could result in a failed or delayed
telephone connection. For this reason, always enter emergency numbers
manually.
No commandDialogue
Ye sDialogue - The entry will be deleted
and the remaining entries will be read
out.
All entries have been read out.End of dialogue

Communication21
Controls and equipment
International calls
Country and area codes can be entered as follows.
Tips for dialling international numbers:
•When making a call abroad, you can say plus (+) before specifying the
digits.
•After the plus (+) the country code must be specified. The country code
follows the conventional format (e.g. 49 for Germany or 44 for Great Britain.
•After the country code, the zero (0) should be left out before the area
code.
Example of how to call Great Britain:
CommandConditionMessageEffect
DIAL NUMBERPhone turned on.Dialogue
PLUS, FOUR, FOURDialogue
SEVEN, THREE, ONEDialogue
THREE, NINE, TWODialogue
DIALDialogue
End of dialogue

Communication
22
Voice command mobile telephone installation
- Models: Ibiza - Ibiza SC
Basic functions
The voice command system can be activated with the “press
to talk” button, located on the multi-function control.
Talk button
The voice command system can be activated with the “press to talk”
button, located on the multi-function control.
If this button is pressed while using the voice command system, the function
is cancelled.
After pushing the “press to talk button” , Ÿfig. 9 wait some seconds for
the sound signal after which the vocal commands may be used. These
commands may be used to manage the functions of the hands-free telephone
system as well as the phone book. Phone book
The voice command system offers the option of creating and using a phone
book belonging to the vehicle system and independent of the mobile tele-
phone. This phone book may contain 50 entries.
WARNING
•Please concentrate on driving. As the driver, you are responsible for
your safety and that of others. For this reason, you should only use the
functions in a manner that allows you to maintain control of the vehi cle in
all situations - otherwise, you may cause an accident!
•The voice command system must not be used in cases of emergency, as
the voice changes in stressful situations. This could result in a failed or
delayed telephone connection. Always dial emergency numbers
manually!
Fig. 9 Talk button on the
multi-function control
AC
AC

Communication23
Controls and equipment
Using the hands-free system from the multi-function control
The hands-free system can be activated using the multi-func-
tion control.
As well as using the voice command system, it is possible to use the functions
of the hands-free system from the controls on the steering wheel.
When the connection is established between your mobile telephone and
hands-free device, the phonebook in your SIM card is downloaded to the
hands-free device.
Depending on the version, when the connection has been established
between the mobile phone and the hands-free device, the phonebook is
downloaded to the hands-free device, allowing the incoming caller and
outgoing numbers to be recognised. This phonebook can not be managed
from the mulit-function control. Nor is it displayed on the radio display.
Example of incoming call
An incoming call can be accepted by pressing the “answer call” button
Ÿfig. 11 on the multi-function control, as well as from the radio control
Ÿ fig. 11 .
Fig. 10 Multi-function
control
Fig. 11 Multi-function
control
Fig. 12 Example of an
incoming call from the
radio display
AEAA