![NISSAN TEANA 2008 Service Manual AV-420
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
NOTE:
*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.
STARTING PROCEDURE
1. Sta NISSAN TEANA 2008 Service Manual AV-420
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
NOTE:
*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.
STARTING PROCEDURE
1. Sta](/manual-img/5/57391/w960_57391-563.png)
AV-420
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
NOTE:
*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.
STARTING PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.
3. While pressing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)
Shifting from current screen to previous screen is performed
by pressing “BACK” button.
Confirmation/
AdjustmentDisplay DiagnosisThe confirmations of the tint with the color spectrum bar display and
shading of color with the gradation bar display can be performed.
Vehicle SignalsDiagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Navigation/PhoneHandsfree Voice Mi-
crophone TestMicrophone speaker check can be performed.
Color Spectrum Bar A color tone can be checked by the color bar display.
Gradation Bar A light and shade can be checked by the gray scale display.
Touch Panel Touch panel response check can be performed.
Vehicle SignalsDiagnosis of signals can be performed for vehicle speed, parking brake,
lights, and reverse.
Confirm/Change
Bluetooth PasskeyThe passkey can be checked and changed.
Confirm/Change
Bluetooth Device
NameThe device name can be checked and changed.
Handsfree Sound
Quality SetNot available.
Speaker Test The connection of a speaker can be confirmed by test tone.
Climate Control
*Not used.
Error HistoryThe system malfunction and the frequency when occurred in the past are
displayed. When the malfunctioning item is selected, the time and place
that the selected malfunction last occurred are displayed.
Camera Cont.The signal connected to camera control unit can be checked and the
guiding line position that overlaps rear view camera image can be adjust-
ed.
Vehicle CAN Diagnosis The transmitting/receiving of CAN communication can be monitored.
AV COMM DiagnosisThe communication condition of each unit of Multi AV system can be
monitored.
Delete Unit Connection Log Erase the connection history of unit and error history.
Initialize Settings Initializes the AV control unit memory.Mode Description
JSNIA1290GB
![NISSAN TEANA 2008 Service Manual AV-426
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
The tint of the color bar indication is as per the following list if RGB signal error is detected.
Vehicle NISSAN TEANA 2008 Service Manual AV-426
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
The tint of the color bar indication is as per the following list if RGB signal error is detected.
Vehicle](/manual-img/5/57391/w960_57391-569.png)
AV-426
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
The tint of the color bar indication is as per the following list if RGB signal error is detected.
Vehicle Signals
A comparison check can be made of each actual vehicle signal and
the signals recognized by the AV control unit.
Navigation/Phone
Handsfree Voice Microphone Test
Microphone speaker check can be performed. A microphone input
level is displayed.
Color Spectrum Bar
R (red) signal error : Light blue (Cyan) tint
G (green) signal error : Purple (Magenta) tint
B (blue) signal error : Yellow tint
JSNIA0149GB
Diagnosis item Display Vehicle status Remarks
Vehicle speed ONVehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed. This is normal. Vehicle speed = 0 km/h (0 MPH)
Parking brakeON Parking brake is applied.
OFF Parking brake is released.
LightsON Light switch ON.
—
OFF Light switch OFF.
IgnitionON Ignition switch ON.
—
OFF Ignition switch in ACC position.
ReverseON Selector lever in R position.
Changes in indication may be delayed. This is normal.
OFFSelector lever in any position other
than R.
JSNIA0490GB
![NISSAN TEANA 2008 Service Manual AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-427
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
A color tone can be checked by the color bar display.
NOTE:
The tint of t NISSAN TEANA 2008 Service Manual AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-427
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
A color tone can be checked by the color bar display.
NOTE:
The tint of t](/manual-img/5/57391/w960_57391-570.png)
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-427
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
A color tone can be checked by the color bar display.
NOTE:
The tint of the color bar indication is as per the following list if RGB
signal error is detected.
Gradation Bar A color tone can be checked by the color bar display.
Touch Panel Touch panel response check can be performed.
Vehicle Signals
A comparison check can be made of each actual vehicle signal
and the signals recognized by the NAVI control unit.R (red) signal error : Light blue (Cyan) tint
G (green) signal error : Purple (Magenta) tint
B (blue) signal error : Yellow tint
JSNIA0491GB
JSNIA0492GB
JSNIA0493GB
JSNIA0516GB
Diagnosis item Display Vehicle status Remarks
Vehicle speedON Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed. This is normal. OFF Vehicle speed = 0 km/h (0 MPH)
Parking brakeON Parking brake is applied.
OFF Parking brake is released.
![NISSAN TEANA 2008 Service Manual AV-428
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Confirm/Change Bluetooth Passkey
The passkey of Bluetooth can be confirmed and changed.
The passkey can NISSAN TEANA 2008 Service Manual AV-428
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Confirm/Change Bluetooth Passkey
The passkey of Bluetooth can be confirmed and changed.
The passkey can](/manual-img/5/57391/w960_57391-571.png)
AV-428
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Confirm/Change Bluetooth Passkey
The passkey of Bluetooth can be confirmed and changed.
The passkey can be changed by four to eight digits within the num-
ber of 0 to 9.
Confirm/Change Bluetooth Device Name
The device name of Bluetooth can be confirmed and changed.
The device name can be changed within the range of twenty digits
of alphabets and codes.
Speaker Test
Select “SPEAKER TEST” to display the Speaker Diagnosis screen.
Press “START and NEXT” to generate a test tone in a speaker.
Press “Start” to generate a test tone in the next speaker. Press “End”
to stop the test tones.
NOTE:
The frequency of test tone emitted from each speaker is as follows.
Climate Control
On-board self-diagnosis is not supported. Only CONSULT-III is supported.
Refer to HAC-159, "
WITH INTELLIGENT AIR CONDITIONER SYSTEM : CONSULT-III Function" for details.
Error History
The self-diagnosis results are judged depending on whether any error occurs from when “Self-diagnosis” is
selected until the self-diagnosis results are displayed.
However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned
ON and then no error has occurred until the self-diagnosis start. Check the “Error Record” to detect any error
that may have occurred before the self-diagnosis start because of this situation.
The frequency of occurrence in error history is displayed in a count up manner. The actual count up method
differs depending on the error item.
Count up method A
LightsON Light switch ON.
—
OFF Light switch OFF.
ReverseON Selector lever in R position.
Changes in indication may be delayed. This is normal.
OFFSelector lever in any position other
than R. Diagnosis item Display Vehicle status Remarks
JSNIA0086GB
JSNIA0517GB
Tweeter : 3 kHz
Front door speaker : 300 Hz
Rear door speaker : 1 kHz
JSNIA0150GB
![NISSAN TEANA 2008 Service Manual AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-431
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FL speaker OUT: openSound signal front speaker LH circuit is
open.Check so NISSAN TEANA 2008 Service Manual AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-431
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FL speaker OUT: openSound signal front speaker LH circuit is
open.Check so](/manual-img/5/57391/w960_57391-574.png)
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-431
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FL speaker OUT: openSound signal front speaker LH circuit is
open.Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: shortSound signal front speaker LH circuit is
shorted between front speaker LH signal
(+) and front speaker LH signal (-).Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: short to groundSound signal front speaker LH circuit to
ground is shorted.Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: short to batterySound signal front speaker LH circuit to
battery is shorted.Check sound signal front speaker LH cir-
cuit.
FL tweeter OUT: openSound signal front squawker LH circuit is
open.Check sound signal front squawker LH cir-
cuit.
FL tweeter OUT: shortSound signal front squawker LH circuit is
shorted between front squawker LH signal
(+) and front squawker LH signal (-).Check sound signal front squawker LH cir-
cuit.
FL tweeter OUT: short to groundSound signal front squawker LH circuit to
ground is shorted.Check sound signal front squawker LH cir-
cuit.
FL tweeter OUT: short to batterySound signal front squawker LH circuit to
battery is shorted.Check sound signal front squawker LH cir-
cuit.
FR tweeter OUT: openSound signal front squawker RH circuit is
open.Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: shortSound signal front squawker RH circuit is
shorted between front squawker RH signal
(+) and front squawker RH signal (-).Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: short to groundSound signal front squawker RH circuit to
ground is shorted.Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: short to batterySound signal front squawker RH circuit to
battery is shorted.Check sound signal front squawker RH cir-
cuit.
GPS Antenna ErrorGPS antenna connection malfunction is de-
tected.Replace the GPS antenna.
DVD Navi Internal Error NAVI control unit malfunction is detected. Replace the NAVI control unit.
Bluetooth module ErrorTEL antenna connection malfunction is de-
tected.TEL antenna.
AV COMM CIRCUITRear control switch power supply and
ground circuits malfunction are detected.Rear control switch power supply and
ground circuits.
AV COMM CIRCUIT
Switches Connection ErrorWhen either one of the following items is
detected:
multifunction switch power supply and
ground circuits are malfunctioning.
AV communication circuits between AV
control unit and multifunction switch are
malfunctioning.
AV communication signal between AV
control unit and multifunction switch is
malfunctioning. Multifunction switch power supply and
ground circuits.
AV communication circuits between AV
control unit and multifunction switch.
AV COMM CIRCUIT
DVD Navi Unit Connection ErrorNAVI control unit power supply and ground
circuits are malfunctioning.NAVI control unit power supply and ground
circuits.
AV COMM CIRCUIT
Amplifier Connection ErrorWhen either one of the following items is
detected:
BOSE amp. power supply and ground
circuits are malfunctioning.
AV communication signal between AV
control unit and BOSE amp is malfunc-
tioning.BOSE amp. power supply and ground cir-
cuits. Error item Description Possible malfunction factor/Action to take
![NISSAN TEANA 2008 Service Manual AV-460
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
U12A1 NAVI CONTROL UNIT
U12A1 NAVI CONTROL UNIT
DescriptionINFOID:0000000003765869
Replace the NAVI control unit if this DTC is displayed. Re NISSAN TEANA 2008 Service Manual AV-460
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
U12A1 NAVI CONTROL UNIT
U12A1 NAVI CONTROL UNIT
DescriptionINFOID:0000000003765869
Replace the NAVI control unit if this DTC is displayed. Re](/manual-img/5/57391/w960_57391-603.png)
AV-460
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
U12A1 NAVI CONTROL UNIT
U12A1 NAVI CONTROL UNIT
DescriptionINFOID:0000000003765869
Replace the NAVI control unit if this DTC is displayed. Refer to AV-649, "Removal and Installation".
DTC LogicINFOID:0000000003765870
DTC DETECTION LOGIC
Part name Description
NAVI CONTROL UNIT Map data can be read from the Map DVD-ROM by installing Map DVD-ROM.
The NAVI control unit sends map data to the AV control unit.
The NAVI control unit includes the hands-free phone and navigation functions.
The NAVI control unit transmits navigation and hands-free phone related imag-
es to AV control unit.
It includes the TEL adapter and Bluetooth
™ function.
Map DVD-ROM A collection of map data.
DTCDisplay contents of
CONSULT-IIIDTC Detection Condition Action to take
U12A1NAVI INTERNAL ERR
[U12A1]NAVI control unit malfunction is detected. Replace the NAVI control unit.
![NISSAN TEANA 2008 Service Manual AV
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO DISPLAY UNIT)
AV-471
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT NISSAN TEANA 2008 Service Manual AV
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO DISPLAY UNIT)
AV-471
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT](/manual-img/5/57391/w960_57391-614.png)
AV
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO DISPLAY UNIT)
AV-471
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO DISPLAY UNIT)
DescriptionINFOID:0000000003765906
Transmit the image displayed with AV control unit or NAVI control unit with RGB signal to the display unit.
Diagnosis ProcedureINFOID:0000000003765907
1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector and AV control unit connector.
3. Check continuity between display unit harness connector and AV control unit harness connector.
4. Check continuity between display unit harness connector and ground.
Is inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK RGB (B: BLUE) SIGNAL
1. Connect display unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector terminal and ground using an oscilloscope.
Is inspection result normal?
YES >> Replace display unit.
NO >> Replace AV control unit.
Display unit AV control unit
Continuity
Connector Terminal Connector Terminal
M49 18M12938 Existed
Display unit
GroundContinuity
Connector Terminal
M49 18 Not existed
(+)
(−) Condition Reference value Display unit
Connector Terminal
M49 18 GroundStart Confirmation / Adjustment
mode, and then display color bar
by selecting “Color Spectrum Bar”
on DISPLAY DIAGNOSIS screen.
SKIB2237J
![NISSAN TEANA 2008 Service Manual AV-478
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
Desc NISSAN TEANA 2008 Service Manual AV-478
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
Desc](/manual-img/5/57391/w960_57391-621.png)
AV-478
< COMPONENT DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
RGB (B: BLUE) SIGNAL CIRCUIT (NAVI CONTROL UNIT TO AV CONTROL
UNIT)
DescriptionINFOID:0000000003765920
Transmit the image displayed with NAVI control unit with RGB signal to the AV control unit.
Diagnosis ProcedureINFOID:0000000003765921
1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect NAVI control unit connector and AV control unit connector.
3. Check continuity between NAVI control unit harness connector and AV control unit harness connector.
4. Check continuity between NAVI control unit harness connector and ground.
Is inspection result normal?
YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK RGB (B: BLUE) SIGNAL
1. Connect NAVI control unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between NAVI control unit harness connector terminal and ground using an oscilloscope.
Is inspection result normal?
YES >> Replace AV control unit.
NO >> Replace NAVI control unit.
NAVI control unit AV control unit
Continuity
Connector Terminal Connector Terminal
B255 21 M130 62 Existed
NAVI control unit
GroundContinuity
Connector Terminal
B255 21 Not existed
(+)
(−) Condition Reference value NAVI control unit
Connector Terminal
B255 21 GroundStart Confirmation / Adjustment
mode, and then display color bar
by selecting “Color Spectrum Bar”
on Navigation/Phone screen.
SKIB2237J