2008 NISSAN ALTIMA HYBRID Owners Manual

Page 225 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual WARNING
cDo not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
oth

Page 226 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual c. You notice a change in the sound of
the exhaust system.
d. You have had an accident involving
damage to the exhaust system, un-
derbody, or rear of the vehicle.
THREE-WAY CATALYST
The three-way cat

Page 227 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual subsequent vehicle start-ups as long as the mal-
function exists. When the malfunction indicator is
illuminated, the system may not be able to detect
or signal low tire pressure as intended. TPMS
malf

Page 228 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual cWhen a spare tire is mounted or a wheel
is replaced, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.

Page 229 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual Seat belts help reduce the risk of injury in colli-
sions and rollovers.In a rollover crash, an
unbelted or improperly belted person is
significantly more likely to be injured or
killed than a person

Page 230 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual When the ignition switch is pushed without de-
pressing the brake pedal, the ignition switch po-
sition will illuminate as follows:
With the selector lever in the P (Park) position
push the switch
con

Page 231 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual ACC (Accessories):
This position activates electrical accessories
such as the radio, when the Hybrid System is off.
ON (Normal operating position):
This position turns on the ignition system and
elect

Page 232 of 351

NISSAN ALTIMA HYBRID 2008 L32A / 4.G Owners Manual CAUTION
cNever place anything except the Intelli-
gent Key in the Intelligent Key port. Do-
ing so may cause damage to the
equipment.
cMake sure the Intelligent Key is in the
correct direction when in