2008 MITSUBISHI SHOGUN ABS

Maintenance
8-23
8
Tyre chains
E01002101143
On 4WD vehicles in which the driving power is distributed preferentially to
the rear wheels, ensure th
at the tyre chains are
fitted on the rear in acco
rdance with the manufacturer’s
instructions.Use only tyre chains which are
designed for use with the tyres
mounted on the vehicle: use of the incorrect size or type of chain could result in damage to the vehicle body.Before fitting tyre chains, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point. The max. chain height is as follows. The speed limit for tyre chain is 50 km/h (31 mph) and remove the tyre chains as soon as possible on snow free roads.
Ty r e s i z e
Wheel size
Max. chain height
[mm]
265/65R17 112H
17x7
1/2J
17x7
1/2JJ
22
265/60R18 110H
18x7
1/2JJ
CAUTION
!●
As your vehicle is equipped with anti-lock brake sys- tem (ABS), in order to ensure that the anti-lockbrake system (ABS) will op
erate correctly in situa-
tions where tyre chains h
ave been fitted, drive in
“4H”, “4HLc” or “4LLc”.
●
Practice fitting the chains
before you need them.
Don’t expect help from ot
her people in the cold.
●
Choose a clear straight
stretch of road where you
can pull over and still be seen while you are fitting the chains.
●
Do not fit chains before you need them. This will wear out your tyres and the road surface.
●
After driving around 100-300 metres, stop and retighten the chains.
●
Drive carefully and do no
t exceed 50 km/h (31 mph).
Remember, fitting chains is not going to stop acci-dents from happening.
●
When tyre chains are instal
led, take care that they
do not damage the disc wheel or body.
●
An aluminium wheel can be damaged by a tyre chain while driving. When
fitting a tyre chain on an
aluminium wheel, take care that any part of thechain and fitting cannot be brought into contact with the wheel.
●
When installing or removing the tyre chains, take care that hands and other parts of your body are not injured by the sharp edges of the vehicle body.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
23 Wednesday, January 9, 2008 4:50 PM

Maintenance
8-53
8
NOTE●
When installing the lens, align the tabs on the lens with the holes on the vehicle side.
Door courtesy lamps
E01005400195
1. Insert a straight blade (or minus) screwdriver with a cloth
over its tip into the edge of the lens, pry gently to remove the lens.
2. Remove the bulb from the lamp holder.Front
BK-BK2008E1ENUK.en-uk-Section11.fm Page
53 Wednesday, January 9, 2008 4:50 PM

8-54 Maintenance
8
3. To install the bulb, perform the removal steps in reverse.
NOTE●
When installing the lens, align the 2 tabs on the lens with the notches on the vehicle side.
RearBK-BK2008E1ENUK.en-uk-Section11.fm Page
54 Wednesday, January 9, 2008 4:50 PM

Alphabetical index
1
A
Accessory socket 5-83 Accessory (Installation) 6Active stability & traction control (ASTC) 4-63Additional equipment 8-28Air conditioningFront automatic air conditioning 5-4Important operation tips for the air conditioning 5-18Rear air conditioning 5-15Air purifier (with deodorizing function) 5-19Airbag 2-58Antenna 5-77Anti-lock brake system (ABS) 4-58Warning lamp 4-60Approach lamp 1-12Armrest 2-10, 2-14Ashtray 5-81AudioError codes 5-72Handling of compact discs 5-74LW/MW/FM electronic tuning radio with CDautochanger 5-43LW/MW/FM electronic tuning
radio with CD player 5-20
Steering wheel remote control switch 5-70Automatic headlamp levelling 3-64Automatic transmissionFluid 9-16Selector lever operation 4-25
Selector lever position 4-28 Sports mode 4-29
B
Backdoor 1-13Battery 8-16Charge warning lamp 3-16Discharged battery (E
mergency starting) 6-2
Specification 9-12Bleeding the fuel system 6-9Bonnet 8-3BrakeAnti-lock brake 4-58Braking 4-56Fluid 8-13, 9-16Parking brake 4-6Power brakes 4-56Warning lamp 3-13Bulb capacity 8-36, 8-38
C
Card holder 5-79, 5-96Cargo area cover 5-103Cargo loads 4-88Catalytic converter 8-3Cautions on handling of 4-wheel drive vehicles 4-53Central door locks 1-9Centre console box 5-94Centre information display 3-17
BK-BK2008E1ENUK.en-ukIX.fm Page 1 Thursday, January 10, 2008 7:53 AM