2008 MITSUBISHI SHOGUN buttons

5-50 For pleasant driving
5
To listen to the radio
E00709000418
1. Press the PWR button (2) to turn the audio system on and
off. Press the AM/FM button (1) to turn on the radio if a CD is being played.
2. Press the AM/FM button (1) to select the desired band. 3. Press the TUNE button (6 or 7) or SEEK button (4 or 5) to
tune to a station, or press one of the memory select button(3) to recall a station memorised for that button.
To tune the radio
E00709100350
Automatic tuning After pressing the SEEK button (4 or 5), the selected station reception will start. Manual tuning The frequency changes every time
the TUNE button (6 or 7) is
pressed. The frequency changes continuously if you keep push-ing the button. Press the button to select the desired station.
To enter frequencies into the memory
E00716100567
Manual settingYou can assign to the memory select buttons (3) a maximum of18 stations in the FM band (6 FM1, 6 FM2 and 6 FM3 stations) and 6 stations each in the MW and LW band. (Stations already assigned to the memory select
buttons are replaced by any
newly assigned stations.)
BK-BK2008E1ENUK.en-uk-Section8.fm Page
50 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-51
5
Follow the steps described below. 1. Press either the TUNE button (6 or 7) to tune the fre-
quency to be entered in the memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer. The sound will be momentarily interrupted while the frequency is being entered into the memory. The number of the button corresponding to the entry in thememory and the frequency are displayed.
3. The preset memory setting is retrieved by pressing the
button for less than 2 seconds.
Automatic setting With the method, all manually set stations in the band currently selected for reception are replaced
with stations in the same
band that are automatically select
ed in order of signal strength.
The radio automatically
selects 6 stations in the FM band (FM3
station only) and 6 stations
each in the MW and LW band.
Follow the steps described below. 1. With the radio mode selected, hold down the AM/FM but-
ton (1) for 2 seconds or longer. The 6 stations with the best signal strength will automatically be assigned to the memory select buttons (3), with the lowest-frequency sta-tion being assigned to the lowest-number button.
2. When you subsequently pre
ss a memory select button to
select a channel number, the
radio will begin receiving the
station assigned to that number.
NOTE●
If you press the AM/FM button (1) for 2 seconds or longer while tuning in the FM1 or FM2 band, the radio will auto- matically switch to the FM3 band, where the automatic seeking/storing will be activated.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
51 Wednesday, January 9, 2008 4:41 PM

5-52 For pleasant driving
5
Radio data system (RDS)
E00709200175
1- AM/FM (FM/MW/LW selection) button 2- PWR (On-Off) button3- Memory select buttons 4- MENU button 5- SEEK (Down-seek) button6- SEEK (Up-seek) button 7- TUNE (Down-step) button 8- TUNE (Up-step) button9- TP (Traffic program) button 10- PTY (Program type) button 11- RDS (Radio data system) indicator12- PTY (Program type) indicator13- REG (Regional program) indicator 14- TP (Traffic program identification) indicator 15- CT (Clock time) indicator
16- Display
BK-BK2008E1ENUK.en-uk-Section8.fm Page
52 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-55
5
NOTE●
If the SEEK button (5 or 6) is pressed for less than 1 sec- ond, the radio will try to find out another broadcast of the same program type as
currently selected.
●
If no station is found with your desired PTY, the display will show “EMPTY” for about 5 seconds and the radio will return to the previous station.
How to enter PTYs in the memory
E00721400092
As many as 6 PTYs can be entered in the memory.Follow the steps described below. 1. Press either the TUNE button (7 or 8) to tune the PTY to
be entered in the memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer. The sound will be momentarily interruptedwhile the PTY is being entered into the memory. The number of the button corresponding to the entry into the memory and the PTY are displayed.
3. The preset memory setting is retrieved by pressing the
button and then releasing it within about 2 seconds.
Traffic information
E00721600140
The radio will automatically tune in to traffic informationbroadcasts while receiving FM
broadcasts or playing compact
discs.To select this function: 1. Press the TP button (9). The display will show TP indica-
tor (14). If the RDS data can
be read, the display will
show RDS indicator (11). If not, the display will show “NO RDS” for about 5 seconds.
2. If the radio detects traffic in
formation on either the station
currently selected or another
station, the display will show
“TRAF INF” for 5 seconds followed by a 2-second indi- cation of the frequency. Then, it will show the name of thestation broadcasting the traffic information to which you will listen. The volume level is set separately for listening to normal audio programs and
for listening to traffic infor-
mation. The volume level will
therefore change automati-
cally to that set when traffic information was last received. When the traffic information
broadcast is over, the radio
will return to the previously
received program and to the
corresponding volume level.
3. Press the TP button (9) to return to the previous condition.NOTE●
While “TP” is illuminated, th
e radio stops only at TP sta-
tions even if the TUNE button (7 or 8) is pressed.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
55 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-61
5
To listen to a CD
E00709601075
The CD can be loaded or ejected
by pressing the LOAD button
(15) or the eject button (7) even
if the audio system power is
off. 1. Press the PWR button (2) to turn the audio system on and
off. The system turns on in the last mode used.
2. Press the CD button (4) to enter CD mode. The auto-
changer will start playback if
the CD is already in the
autochanger.
3. To stop the CD, turn off the power by pressing the PWR
button (2) or change over to radio mode by pressing theAM/FM button (1), or eject th
e disc by pressing the eject
button (7).
NOTE●
To adjust the volume and tone, refer to “To adjust the vol- ume” on page 5-44 and “To adjust the tone” on page 5-44.
●
As many as 6 CDs can be inserted into the CD auto- changer.
●
For information concerning
the handling of the compact
discs, refer to “Handling of compact discs” on page 5-74.
To s e t d i s c sTo set a single disc 1. Press the LOAD button (15) briefly. 2. The autochanger will show “WAIT” on the display and
start making itself ready for disc loading.
3. When the autochanger is read
y for disc loading, the indi-
cator light (A) will come on and the display will show “LOAD DISC (1~6)”.
4. Insert a disc into the disc loading slot.NOTE●
If there are multiple empty slots, you can select your desired slot by pressing the
DISC buttons (16 or 17).
●
If you do not insert a disc for about 15 seconds after the autochanger starts standing
by for loading, the loading
standby mode w
ill be canceled.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
61 Wednesday, January 9, 2008 4:41 PM

5-70 For pleasant driving
5
Steering wheel remote control switch
*E00710000173
The remote control switches are lo
cated on the left side of the
steering wheel. These switches can be used when
the ignition switch is in the
“ON” position.NOTE●
Do not push two or more of the steering wheel remote control switches at the same time.
To turn on the powerPWR (ON-OFF) button — 3When the power is off, press this button to turn the power on.To turn the power off, press this button for 2 seconds or longer.To adjust the volumeVolume up button — 1The volume will increase when this button is pressed.Volume down button — 2The volume will decrease when this button is pressed.To listen to the audio systemSelect the desired mode by lightly pressing the mode change button (3). The mode switches between the
radio and CD with each push
of the button.To listen to the radioTo select FM/MW/LW modeMode change button — 3 Select the desired band by pressing this button. The order is: FM1
→ FM2
→ FM3
→ MW
→ LW
→ CD
→
FM1.Automatic radio tuningSeek up button — 4/Seek down button — 5 After pressing these buttons, the
reception of the selected sta-
tion will begin.
1- Volume up button 2- Volume down button 3- PWR (ON-OFF)/Mode change button 4- Seek up/Track up/Fast-forward button5- Seek down/Track down/Fast-reverse button
BK-BK2008E1ENUK.en-uk-Section8.fm Page
70 Wednesday, January 9, 2008 4:41 PM