For emergencies
6-25
6
12. Lower the vehicle slowly and then tighten the nuts in the
order shown in the illustration until each nut has been
tightened to the torque listed here.
Tightening torque
88 to 108 Nm
(Achieved by applying a force of 350 to 420 N at the end
of the wheel nut wrench supplied with the vehicle)
13. Lower and remove the jack, then store the jack and chock.14. Wrap the removed wheel in the vinyl sheet and store it in
the luggage area.
Have your damaged tyre repaired as soon as possible.
NOTE●The vinyl sheet is stored under the third seat together
with the tools and jack. (Refer to “Tools and jack” on page
6-10.)
CAUTION
!●Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.
WARNING
!●When storing the removed wheel, raise the left- and
right-hand parts of the third seat seatback and
stand the wheel upright.
If you leave the space configured as a luggage area
when storing the wheel, serious injuries could occur
in the event of a collision.
BK-XP08E1ENUK.en-uk.book Page 25 Monday, August 13, 2007 2:20 PM
Specifications
9-9
9 Engine specifications
E01100601334
Item
Petrol-powered vehicles
Diesel-powered vehicles
(except for DPF models)
Diesel-powered vehicles
(for DPF models)
Engine typeFour-cylinder, in line, water
cooled, four-cycle, single
overhead camshaftFour-cylinder, in line, water cooled, four-cycle, double overhead
camshaft with intercooler and turbochargerEngine model
Total displacement
Bore
Stroke
Compression ratio4G69
2,378 cc
87.0 mm
100.0 mm
9.5BSY BWC
1,968 cc
81.0 mm
95.5 mm
18.0Valve clear-
ance
Intake 0.20 mm (hot) AutomaticallyExhaust 0.30 mm (hot) Automatically
Firing order 1-3-4-2 1-3-4-2Maximum output (EEC net) 121 kW/6,000 r/min 100 kW/4,000 r/min 103 kW/4,000 r/minMaximum torque (EEC net) 217 Nm/4,000 r/min 310 Nm/1,750 r/min
BK-XP08E1ENUK.en-uk.book Page 9 Monday, August 13, 2007 2:20 PM
