2008 MITSUBISHI GRANDIS light

Overview
RHD
Instruments p. 3-2Windscreen wiper and
washer switch p. 3-41
Rear window wiper and
washer switch p. 3-43
Supplemental restraint system
- air bag (for driver’s seat) p. 2-53
Horn switch p. 3-46 Combination headlamps and dipper
switch p. 3-32
Turn signal lever p. 3-37
Headlamp washer switch* p. 3-45Ignition switch p. 4-14
Personal box p. 5-66
Fuses p. 8-33
Bonnet release lever
p. 8-4Outside rear-view mirrors switch
p. 4-10
Front fog lamp switch p. 3-39
Steering wheel height
adjustment p. 4-8
Fuel tank filler door release
lever p. 3 Cigarette lighter* p. 5-55
Card holder p. 5-72Headlamp levelling
switch* p. 3-35 TCL switch*
p. 4-42
Rear fog lamp switch p. 3-40Auto-speed control lever* p. 4-45
SONAR switch*
p. 4-54
BK-XP08E1ENUK.en-uk.book Page 2 Monday, August 13, 2007 2:20 PM

Overview
Instruments and Controls (Instrument panel)
E00100102658
LHD
Multi centre display*
p. 3-15
Ventilators p. 5-2
Rear window demister
switch p. 3-45
Hazard warning flasher
switch p. 3-38
Ashtray (fixed position)
p. 5-54
Cup holder (for front seats)
p. 5-68 Gearshift or selector lever p. 4-23, 4-26
Parking brake lever p. 4-6
Cigarette lighter*
p. 5-55Supplemental restraint
system - air bag (for
front passenger’s seat)
p. 2-53
Front automatic air con-
ditioning p. 5-7
Audio p. 5-21 Instrument panel upper box p. 5-65
Heated seat switch* p. 2-8Front passenger’s air
bag ON-OFF switch
p. 2-59 Front passenger’s air
bag off indication
lamp p. 2-62Multi display station*
Refer to the separate
“Multi display station
owner’s manual”BK-XP08E1ENUK.en-uk.book Page 3 Monday, August 13, 2007 2:20 PM

1-2 Locking and unlocking
1Keys
E00300101099
The keys fit all locks.
NOTE●The key number is stamped on the tag as indicated in the
illustration.
Make a record of the key number and store the key and
key number tag in separate places, so that you can order a
key in the event the original keys are lost.
●The key is a precision electronic device with a built-in sig-
nal transmitter. Please observe the following in order to
prevent a malfunction.
• Do not leave anywhere exposed to direct sunlight, for
example on the dashboard.
• Do not dissemble or modify.
• Do not excessively bend the key or subject it to strong
impact.
• Do not expose to water.
• Keep away from magnetic key holders.
Type 1
Type 2
BK-XP08E1ENUK.en-uk.book Page 2 Monday, August 13, 2007 2:20 PM

Locking and unlocking
1-17
1
NOTE●Repeated operation with the engine stopped will run down
the battery. Operate the window switches only while the
engine is running.Driver’s switchesThe driver’s switches can be used to operate all door windows.
A window can be opened or closed by operating the corre-
sponding switch.
Press the switch down to open the window, and pull up the
switch to close it.
If the switch is fully pressed down/pulled up, the door window
automatically opens/closes completely.
If you want to stop the window movement, operate the switch
lightly in the reverse direction.
1- Driver’s door window
2- Front passenger’s door window
3- Rear left door window
4- Rear right door window
5- Lock switch
WARNING
!●Before operating the electric window control, make
sure that nothing is capable of being trapped (head,
hand, finger, etc.).●Never leave the vehicle without removing the key.●Never leave a child (or other person who might not
be capable of safe operation of the electric window
control) in the vehicle alone.Driver’s switch (RHD)
BK-XP08E1ENUK.en-uk.book Page 17 Monday, August 13, 2007 2:20 PM

2-6 Seat and seat belts
2Front seat
E00400400012
To adjust forward or backward
E00400500491
Pull the seat adjusting lever and adjust the seat forward or
backward to the desired position. After adjustment, release the
adjusting lever to lock the seat in position.
To recline the seatback
E00400600610
In order to recline the seatback, lean forward slightly, pull the
seatback lock lever up, and then lean backward to the desired
position and release the lever. The seatback will lock in that
position.
WARNING
!●To ensure the seat is locked securely, try to move the
seat forward or backward without using the adjust-
ing lever.
CAUTION
!●The reclining mechanism of the seatback is spring
loaded, causing it to return to the vertical position
when the lock lever is operated. When using the
lever, sit close to the seatback or hold it with your
hand to control its return motion.
BK-XP08E1ENUK.en-uk.book Page 6 Monday, August 13, 2007 2:20 PM

2-8 Seat and seat belts
2
Heated seats*
E00401100205
The heated seats can be operated with the ignition switch in the
“ON” position.
The indication lamp (A) will illuminate while the heater is on.
NOTE●Do not place heavy objects on the seat or stick pins, nee-
dles, or other pointed objects into it.
●When cleaning the seat, do not use benzene, gasoline,
alcohol, or other organic solvents; this might damage the
surface of the seat and also the heater element.
●If water or any other liquid is spilled on the seat, allow it
to dry thoroughly before attempting to use the heater.
1- Heater high (for quick heating).
2- Heater off.
3- Heater low (to keep the seat warm).
CAUTION
!●Operate in the high position for quick heating. Once
the seat is warm, set the heater to low to keep it
warm. Slight variations in seat temperature may be
felt while using the heated seats. This is caused by
the operation of the heater’s internal thermostat and
does not indicate a malfunction.
●If the following types of persons use the heated seats,
they might become too hot or receive minor burns
(red skin, heat blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol or sleep
inducing medication (cold medicine, etc.)
●Do not use a blanket, cushion, or other material with
high heat insulation properties on the seat while
using the heater; this might cause the heater element
to overheat.●Turn the heater off immediately if it appears to be
malfunctioning during use.
CAUTION
!
BK-XP08E1ENUK.en-uk.book Page 8 Monday, August 13, 2007 2:20 PM

2-10 Seat and seat belts
2
To recline the seatback
E00402200186
In order to recline the seatback, lean forward slightly, pull the
seatback lock lever up, and then lean backward to the desired
position and release the lever. The seatback will lock in that
position.
WARNING
!●To ensure the seat is locked securely, try to move the
seat forward or backward without using the adjust-
ing lever.7-person seat
6-person seat
BK-XP08E1ENUK.en-uk.book Page 10 Monday, August 13, 2007 2:20 PM

Seat and seat belts
2-17
2 Third seat
E00402700208
When sitting in the third seat, adjust the head restraints to
heights at which they lock in position. Refer to “Head
restraints” on page 2-19.To recline the seatback
E00402800140
In order to recline the seatback, lean forward slightly, pull the
seatback lock lever up, and then lean backward to the desired
position and release the lever. The seatback will lock in that
position.NOTE●It is possible to adjust the seatback angle independently on
each side of the seats.
CAUTION
!●The reclining mechanism of the seatback is spring
loaded, causing it to return to the vertical position
when the lock lever is operated. When using the
lever, sit close to the seatback or hold it with your
hand to control its return motion.
BK-XP08E1ENUK.en-uk.book Page 17 Monday, August 13, 2007 2:20 PM