2008 MERCEDES-BENZ S-Class audio

340 Control systemsVoice Control command listCommand list
Chapter “Command list” gives you on over-
view of all commands available for use to
control the Voice Control System.
Which commands are available for use is
dependent on the equipment level in your
vehicle.General commandsi
Some functions can be operated using sev-
eral different commands. In the following list,
these commands are grouped in one cell.
Choose your preferred command from those
available.


yes


right


ok


cancel


stop


quit


abort


terminate


no


no thank you


address book


MP3


CD


navigation


route guidance


audio DVD


radio


sat radio


satellite radio


telephone


messages


SMS


vehicle


correction


wrong


incorrect


help


help please


please help


help functions


help devices


help voice control


linguatronic help


general help


help permanent commands

341 Control systems
Voice Control command list
Telephone* commands


help global commands


letters of the English alphabet


digits 0 - 9


continue


go forward


next page


back


go back


previous page


help radio


help tuner


radio help


tuner help


help telephone


help phone


help address book


help CD


help disc


help CD player


help CD changer


help audio DVD


help DVDA


help DVD audio


help DVD audio player


help DVD audio changer


help navigation


help nav


help navi


help route guidance


help routing


help destination guidance


telephone (on)


phone (on)


telephone off


save


save PIN


save PIN code


save number


save PIN number


save telephone number


save name


save password


store PIN


store PIN code


store number


store PIN number

347 Control systems
Voice Control command list
Audio commands


home car phone


car home


car phone home


home land line


home land line phone


land line home


land line phone home


home cell phone


home mobile


cell home


cell phone home


mobile home


mobile phone home


cellular home


cellular phone home


call work car


call work land line


call work cell phone


call home car


call land line phone


call cell phone home


navigate to


drive to


navigate to work


navigate to home


dial name


dial voice name


save name


save voice name


save number


save telephone number


store voice name


store number


store telephone number


accept


accept PIN


accept PIN code


accept lock code


accept PIN number


accept number


accept telephone number


accept name


accept password


OK


finished


<1> - <8>


use <1> - <8>


number <1> - <8>


line <1> - <8>


audio


audio off

350 Control systemsVoice Control command list
DVD


next folder


other folder


previous directory


previous folder


last directory


last folder


repeat directory


repeat folder


next track


other track


previous track


last track


repeat track


replay track


track 1-39


load track 1-39


load track number 1-39


select track 1-39


select track number 1-39


MP3 1-6


MP3 number 1-6


medium 1-6


medium number 1-6


drive


memory card


audio DVD


DVDA player (on)


audio DVD player (on)


DVD audio player (on)


DVDA changer (on)


audio DVD changer (on)


DVD audio changer (on)


next DVDA


other DVDA


next DVD audio


other DVD audio


next audio DVD


other audio DVD


next medium


other medium


previous DVDA


last DVDA


preceding DVDA


replay DVDA


previous DVD audio


last DVD audio


preceding DVD audio


replay DVD audio


previous audio DVD


last audio DVD


preceding audio DVD


replay audio DVD

351 Control systems
Voice Control command list


replay medium


repeat medium


last medium


previous medium


next directory


other directory


next folder


other folder


previous directory


previous folder


last directory


last folder


repeat directory


repeat folder


next group


other group


previous group


previous repeat group


previous replay group


last group


last repeat group


last replay group


group 1-9


select group 1-9


group number 1-9


select group number 1-9


next track


other track


previous track


last track


repeat track


replay track


track 1-39


load track 1-39


load track number 1-39


select track 1-39


select track number 1-39


DVDA 1-6


DVDA number 1-6


DVD audio 1-6


DVD audio number 1-6


audio DVD 1-6


audio DVD number 1-6


medium 1-6


medium number 1-6

544 Controls in detailUseful featuresEmergency calls
An emergency call is initiated
automatically following an accident in
which the emergency tensioning devices
(ETDs) or air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. For instructions on initiating an
emergency call manually (
page 545).
Once the emergency call is in progress, the
indicator lamp in the SOS button will begin
to flash. The message:


“Connecting Call” appears in the multi-
function display


“Emergency Call Activated” appears in
the COMAND display
and the audio system is muted. When the
connection is established, the message:


“Call Connected” appears in the multi-
function display


“Emergency Call Activated” appears in
the COMAND display
All information relevant to the emergency,
such as the location of the vehicle (deter-
mined by the GPS satellite location sys-
tem), vehicle model, identification number
and color are generated.
A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon af-
ter the emergency call has been initiated.
The Response Center will attempt to deter-
mine more precisely the nature of the acci-
dent provided they can speak to an
occupant of the vehicle.The Tele Aid system is available if


it has been activated and is operation-
al. Activation requires a subscription
for monitoring services, connection,
and cellular air time


the relevant monitoring service and
GPS coverage are available and pass
the information on to the Response
Center


there is sufficient voltage in the vehicle
batteries
i
During the emergency call message “Emer-
gency Call Activated” is displayed, operation
from COMAND is not possible. The automatic cli-
mate control can be still adjusted using the
switches on the climate control panel.
i
If no vehicle occupant responds, an ambu-
lance will be sent to the vehicle immediately.
i
Location of the vehicle on a map is only pos-
sible if the vehicle is able to receive signals from
the GPS satellite network and pass the informa-
tion on to the Response Center.Warning!
G
If the indicator lamp in the SOS button is
flashing continuously and there was no
voice connection to the Response Center
established, then the Tele Aid system could
not initiate an emergency call (e.g. the rele-
vant mobile phone network is not available).

546 Controls in detailUseful featuresRoadside Assistance button• and
Information button¡
The Roadside Assistance button• and
the Information button¡ are located in
the storage compartment below the front
armrest (
page 527).
1Information button¡
2Roadside Assistance button•Roadside Assistance button•

Press and hold Roadside Assistance
button • (for longer than
2 seconds).
A call to a Mercedes-Benz Roadside As-
sistance dispatcher will be initiated.
The button will flash while the call is in
progress. The message:

“Connecting Call” appears in the
multifunction display


“Roadside Assistance Activated”
appears in the COMAND display
and the audio system is muted.
When the connection is established, the
message:


“Call Connected” appears in the multi-
function display


“Roadside Assistance Activated”
appears in the COMAND display The Tele Aid system will transmit data gen-
erating the vehicle identification number,
model, color and location (subject to avail-
ability of cellular and GPS signals).
A voice connection between the Roadside
Assistance dispatcher and the occupants
of the vehicle will be established.

Describe the nature of the need for as-
sistance.
The Mercedes-Benz Roadside Assistance
dispatcher will either dispatch a qualified
Mercedes-Benz technician or arrange to
tow your vehicle to the nearest authorized
Mercedes-Benz Center. For services such
as labor and/or towing, charges may ap-
ply. Refer to the Roadside Assistance Man-
ual for more information.
These programs are only available in the
USA:


Sign and Drive services: Services such
as jump start, a few gallons of fuel or
the replacement of a flat tire with the
vehicle spare tire are obtainable.

547 Controls in detail
Useful features
Information button¡
Press and hold Information button
¡ (for longer than 2 seconds).
A call to the Customer Assistance Cen-
ter will be initiated. The button will
flash while the call is in progress. The
message:

“Connecting Call” appears in the
multifunction display


“Information Call Activated” ap-
pears in the COMAND display
and the audio system is muted.
When the connection is established, the
message:


“Call Connected” appears in the multi-
function display


“Information Call Activated” appears in
the COMAND display
The Tele Aid system will transmit data gen-
erating the vehicle identification number,
model, color and location (subject to avail-
ability of cellular and GPS signals).A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. Information regarding the operation
of your vehicle, the nearest authorized
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).
i
The indicator lamp in the Roadside Assis-
tance button• remains illuminated in red for
approximately 10 seconds during the system
self-check after switching on the ignition (togeth-
er with the SOS button and the Information
button¡).
See system self-check (
page 543) if the indi-
cator lamp does not come on in red or stays on
longer than approximately 10 seconds.
If the indicator lamp in the Roadside Assistance
button• is flashing continuously and no
voice connection to the Response Center was
established, the Tele Aid system could not ini-
tiate a Roadside Assistance call (e.g. the relevant
mobile phone network is not available). The mes-
sage:


“Call Failed” appears in the multifunction
display for approximately 10 seconds


“Call could not be connected!” appears in
the COMAND display. Confirm the message
pressing
n
(page 90).
Roadside Assistance calls can be terminated us-
ing button t on the multifunction steering
wheel or COMAND (page 141).
i
The indicator lamp on the Information
button¡ remains illuminated in red for ap-
proximately 10 seconds during the system
self-check after switching on the ignition (togeth-
er with the SOS button and the Roadside Assis-
tance button•).
See system self-check (
page 543) if the indi-
cator lamp does not come on in red or stays on
longer than approximately 10 seconds.
If the indicator lamp in the Information
button¡ is flashing continuously and no
voice connection to the Response Center was
established, then the Tele Aid system could not
initiate an Information call (e.g. the relevant