2008 MERCEDES-BENZ S-Class coolant level

[x] Cancel search: coolant level

Page 11 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual Contents
Driving abroad ..............................  567
Control and operation of 
radio transmitters.........................  567
Catalytic converter .......................  568
Emission control

Page 422 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 421 Controls in detail
Driving and parking
The coolant temperature is above 
248°F (120°C)
The coolant is too hot and is no longer 
cooling the engine.
Stop the vehicle in a safe location as 
soon

Page 446 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 445 Controls in detail
Instrument cluster
Tachometer
The red marking on the tachometer de-
notes excessive engine speed.To help protect the engine, the fuel supply 
is interrupted if the engine is ope

Page 573 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 572 OperationAt the gas stationCheck regularly and before a long tripExample illustration from S 5501Coolant level
2Brake fluid
3Windshield washer and headlamp 
cleaning systemWindshield washer system

Page 580 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 579 Operation
Engine compartment
Active Body Control* (ABC*) fluid level
Regular fluid level check is not required. If 
you notice fluid leaks or malfunction mes-
sages in the multifunction display, h

Page 581 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 580 OperationEngine compartment
Using a rag, turn cap1 slowly approx-
imately one half turn counterclockwise 
to release any excess pressure.

Continue turning the cap counterclock-
wise and remove

Page 680 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 679 Practical hints
What to do if …?
Display 
Possible cause/consequence
Possible solution
Check
Coolant Level
See Oper. Manual
The coolant level is too low.

Add coolant (
page 579).

If you hav

Page 773 of 801

MERCEDES-BENZ S-Class 2008 W221 Comand Manual 772 Technical dataFuels, coolants, lubricants, etc.The coolant solution must be used year 
round to provide the necessary corrosion 
protection and increase boil-over protec-
tion. Refer to Maintenanc
Page:   1-8 9-16 next >