2008 MERCEDES-BENZ R-CLASS MPV fold seats

Seats
85Entry position
Easy-exit feature
The release loop for the easy-exit feature is
located at the bottom on the back of each
outer seat in the 2nd row of seats. 1
Release loop for the easy-exit feature X
Pull release loop 1in the direction of the
arrow and hold it in this position.
The backrest folds forwards.
X Slide the seat in the 2nd row of seats for-
wards to the stop. Exit position
Moving the outer seats in the 2nd row
back to the normal position Seat unlocked
1
Lock verification indicator
2 Indicator area
When the seat is unlocked, lock verification
indicator 1is folded out and indicator area
2 is clearly visible.
X To lock the seat: fold back the backrest
until you hear it engage. Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 85 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Seats
86Seat locked
1
Lock verification indicator
2 Indicator area
When the seat is locked, lock verification indi-
cator 1is folded in and indicator area 2is
barely visible. Multi-contour seat*
You can set the contour of the seat to provide
optimum support for your back. 1
Backrest side cushions
2 Upper back support
3 Lumbar region support
4 Thigh cushion
Adjusting the contour of the backrest X
Make sure that the key is in position 1in
the ignition lock.
X Use switch 4to move the thigh cushion
into the desired position.
X Press the æorç button to adjust the
contour of the backrest to suit your back. X
Press button 3to move the point of great-
est backrest curvature downwards to the
lumbar region and press button 2to move
it upwards to the upper back region.
X Adjust the side cushions of the backrest
using button 1so that you have good lat-
eral support. Seat ventilation*
The three blue indicator lamps in the button
indicate the ventilation level you have selec-
ted. 1
Seat ventilation Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 86Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
184
Cup holder in the centre console
1
Cover
2 Chrome catch
X To open: briefly press chrome catch 2in
the direction of the arrow.
Cover 1swings upwards. 1
Cover
2 To secure the drink container
3 Retainer
4 Release button
5 To release the retainer
X To secure a drink container (driver's
side): place a drink container in the left-
hand cup holder.
X Press release button 4in the direction of
arrow 5.
X Guide retainer 3onto the drink container
in the direction of arrow 2.
X To release a drink container (driver's
side): press release button 4in the direc-
tion of arrow 5.
Retainer 3automatically snaps back into
its original position. X
To close: make sure that there is no drink
container in the cup holder.
X Fold cover 1downwards until it engages.
Cup holder for the 2nd row of seats
below the centre air vents* !
Close the cup holder if you are not using
it and before folding down the 2nd row of
seats.
i Vehicles with a centre console for the 2nd
row of seats* and a short wheelbase do not
have a cup holder below the centre air
vents.
Opening the cup holder 1
Cover Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 184Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
185
X
Open cover 1and fold it down to the stop
in the direction of the arrow. 1
Cover
2 Cup holder
X Pull cup holder 2out to the stop in the
direction of the arrow.
X Place a drink container in cup holder 2
from above.
Closing the cup holder
X Make sure that there is no drink container
in the cup holder.
X Push cup holder 2forwards into the stow-
age compartment until it engages. X
Fold cover 1upwards until it engages in
the first position.
X Swing cover 1forwards until it engages in
the second position.
Cup holder in front of the armrest of
the 2nd row of seats* 1
Cup holder Cup holder in the side trim of the third
row of seats 1
Cup holder Roof rack system*
G
Risk of accident and injury
An incorrectly secured roof rack, ski rack
or load could become detached from the
vehicle. These objects may be thrown
around and can injure you or others or
cause an accident. Follow the roof rack/ski
rack manufacturer's installation instruc-
tions and special instructions for use.
The roof load raises the vehicle's centre of
gravity, thereby affecting vehicle handling.
You must always observe the maximum Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 185 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
190 Enlarging the luggage compartment
To enlarge the luggage compartment, the rear
bench seats of the 2nd and 3rd rows of seats
can be folded forwards separately. You can
enlarge the luggage compartment partially
(Y page 190) or fully ( Ypage 191). G
Risk of injury
Do not carry heavy or hard objects inside
the vehicle or in the luggage compartment
unless they are secured.
Otherwise, you and other vehicle occu-
pants could be injured by objects being
thrown around the vehicle in the event of
sharp braking, a sudden change in direction
or an accident.
When using the luggage compartment
enlargement feature, you must always fully
fold down the respective backrests and
attach the safety net. G
Risk of poisoning
Always drive with the tailgate closed.
Exhaust fumes could otherwise enter the
vehicle interior.
! If you want to fold the outer seats down
in the 2nd row of seats, the front seats must
not be in the rearmost position. Otherwise, you could damage the front seats and the
2nd row outer seats.
! Close the cup holder* before folding
down the 2nd row of seats. You could oth-
erwise damage the seats or cup holder.
Enlarging the luggage compartment
partially Folding the seats in the 3rd row forwards
X
Move the head restraint of the correspond-
ing seat down fully ( Ypage 83). 1
Backrest release handle
2 Retainer for the seat belt
3 Backrest X
Clamp the seat belt behind retainer 2.
X Pull release handle 1of backrest 3
upwards in the direction of the arrow.
Backrest 3is released.
X Fold backrest 3slowly forwards.
Seat cushion 1is released and moves
automatically to a vertical position. 1
Seat cushion
2 Loop
3 Backrest
i Loop 2can be used to pull the backrests
of the 3rd row of seats upright when the
seats are moved into the original position
(Y page 81). Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 190Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
191
X
Fold backrest 3forwards into a horizontal
position.
Enlarging the luggage compartment
fully G
Risk of injury
Folding down the seats in the 2nd row of
seats, in combination with folding the seats
in the 3rd row of seats, serves the purpose
of fully enlarging the luggage compartment.
Vehicle occupants in the 3rd row of seats
must not use the folded-down seats of the
2nd row of seats as a footrest.
Vehicle occupants in the 3rd row of seats
must not use the folded-down seats of the
2nd row of seats as a table or stowage
space, e. g. for drinks or items of luggage.
Otherwise:
R they could suffer serious or fatal head
injuries
R they or others could be injured by objects
being thrown around:
if you brake suddenly, change direction
abruptly or have an accident. Make absolutely sure that you adhere to the
specified folding order when fully enlarging
the luggage compartment.
Folding the middle seat in the 2nd row of
seats
!
On vehicles with a short wheelbase, the
head restraint must be removed before the
centre seat is folded. You could otherwise
damage the head restraint or the centre
console. X
Fold the centre seat to the armrest position
(Y page 81). Armrest position
1
Seat release loop
2 Seat
X Pull release loop 1in the direction of the
arrow and hold it securely.
The seat is released and folds up.
X Press seat 2further down until the front
of the seat engages in the luggage com-
partment floor position. Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 191 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
192Luggage compartment floor position
Folding the outer seats of the 2nd row of
seats
! If you want to fold the outer seats down
in the 2nd row of seats, the front seats must
not be in the rearmost position. Otherwise,
you could damage the front seats and the
2nd row outer seats.
X Move the seat concerned in the 2nd row to
its rearmost position (Y page 81).
X Remove the centre console* for the
2nd row of seats, if installed
(Y page 195).
i On vehicles with a long wheelbase, the
centre console* for the 2nd row of seats
can remain in place if it has been installed in the forward position (position 1)
(Y
page 195). However, the loading area
will not be level. The stowage compartment
and cup holder will only be illuminated if the
centre console is fitted in the rear position
(position 0) (Y page 195).
X Remove the head restraints of the seats
concerned (Y page 83). 1
Backrest
2 Release catch
3 Seat cushion
X Lay the head restraints on the seat cushion
of the corresponding seat.
X Relieve the pressure on backrest 1and
pull release lever 2upwards in the direc- tion of the arrow beyond the pressure point
to the stop.
Backrest
1and the seat are unlocked.
X Fold backrest 1forwards until it is resting
horizontally on seat cushion 3. 1
Backrest
2 Seat cushion
X Now push backrest 1down further until
seat cushion 2engages on the floor.
Folding the seats in the 3rd row forwards
X Push down the respective head restraints
in the 3rd row as far as they will go
(Y page 83). Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 192Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
1931
Backrest release handle
2 Retainer for the seat belt
3 Backrest
X Clamp the seat belt behind retainer 2.
X Pull release handle 1of backrest 3
upwards in the direction of the arrow.
Backrest 3is released.
X Fold backrest 3slowly forwards.
Seat cushion 7(3rd row of seats) is
released and moves automatically to a ver-
tical position. 3
Backrest (3rd row of seats)
4 Recess (on backrest in 2nd row of seats)
5 Guide pin (on backrest in 3rd row of seats)
6 Backrest (2nd row of seats)
7 Seat cushion (3rd row of seats)
8 Loop
i Loop 8can be used to pull the backrests
of the 3rd row of seats upright when the
seats are moved into the original position
(Y page 81).
X After it has been moved to a vertical posi-
tion automatically, fold seat cushion 7
further forwards until it reaches a horizon-
tal position. Make sure that guide pin 5of seat cushion
7(3rd row of seats) catches
fully in recess 4of backrest 6.
X Fold backrest 3forwards into a horizontal
position.
Moving the seats back into the driving
position G
Risk of injury
Ensure that the seats are locked and the
backrests are in the upright position before
driving.
The outer seats in the 2nd row are only
locked if the lock verification indicator is
folded in and the indicator area is barely
visible.
If the backrests are not locked, they could
fold forwards in case of sudden braking, a
sudden change of direction or an accident.
This means that they cannot provide the
intended level of restraint, and could cause
additional serious or even fatal injury.
Make absolutely sure that you reset the seats
to the driving position in the specified order.
Resetting seats in the 3rd row of seats
! Make absolutely sure that you reset the
seats to the driving position in the specified Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 193 ZDateiname: 6515_1825_02_buchblock.pdf; preflight