2008 MERCEDES-BENZ R-CLASS MPV clock reset

Instrument cluster
27Function Page
1 ABS warning lamp
281
2 LIM indicator lamp
149
3
ESP
®
warning lamp 282
4 Display unit for the speed-
ometer
5
Distance warning lamp*
1 62
6 Brake system warning lamp
283
7 Tyre pressure warning
lamp*
2 284
8 Turn signal indicator lamp,
left
99
9 Adjusts the instrument
cluster lighting: dimmer
a Reset button
119
b Adjusts the instrument
cluster lighting: brighter Function Page
c Turn signal indicator lamp,
right
99
d Seat belt warning lamp
284
e Diesel engine: preglow indi-
cator lamp
111
f SRS warning lamp 41,
283 g Engine diagnostics warning
lamp
284
h Main-beam indicator lamp
100
j Rev counter
119
k Fuel gauge
l Fuel filler cap location: cap
is on the right at the rear Function Page
m Reserve tank warning lamp
286
n Total distance recorder
125
o Trip meter
119
p Multi-function display
119
q Gearshift program display
116
r Transmission position dis-
play
115
s Depending on the setting in
the on-board computer:
125
• outside temperature
3
• digital speedometer t Speedometer (the unit can
be changed to miles in the
on-board computer)
130
u Clock
131
1
On vehicles without Distronic* the symbol lights up briefly but has no function.
2 Only on vehicles with tyre pressure monitor*.
3 Vehicles for the United Kingdom: the outside temperature is always displayed in the digital speedometer. At a glance
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 27Dateiname: 6515_1825_02_buchblock.pdf; preflight

Instrument cluster
29Function Page
1 ABS warning lamp
281
2 LIM indicator lamp
149
3
ESP
®
warning lamp 282
4 Display unit for the speed-
ometer
5
Distance warning lamp*
4 62
6 Brake system warning lamp
283
7 Tyre pressure warning
lamp*
5 284
8 Turn signal indicator lamp,
left
99
9 Adjusts the instrument
cluster lighting: dimmer
a Reset button
119
b Adjusts the instrument
cluster lighting: brighter
c Turn signal indicator lamp,
right
99 Function Page
d Seat belt warning lamp
284
e Diesel engine: preglow indi-
cator lamp
111
f SRS warning lamp 41,
283 g Engine diagnostics warning
lamp
284
h Main-beam indicator lamp
100
j Rev counter
119
k Fuel gauge
l Fuel filler cap location: cap
is on the right at the rear
m Reserve tank warning lamp
286
n Total distance recorder
125
o Trip meter
119
p Multi-function display
119
q Gearshift program display
116 Function Page
r Transmission position dis-
play
115
s Depending on the setting in
the on-board computer:
125
• outside temperature
6
• digital speedometer t Speedometer
130
u Clock
131
4
On vehicles without Distronic* the symbol lights up briefly but has no function.
5 Only on vehicles with tyre pressure monitor*.
6 Vehicles for the United Kingdom: the outside temperature is always displayed in the digital speedometer. At a glance
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 29Dateiname: 6515_1825_02_buchblock.pdf; preflight

Instrument cluster
119Activating the multi-function display
X Switch on the ignition. 1
To dim the instrument cluster lighting
2 Reset button
3 To brighten the instrument cluster lighting
The multi-function display is also activated
when you:
R switch on the lights
R press reset button 2
R open a front door Adjusting the instrument cluster
lighting
X Brighter: press and hold down button 3.
X Dimmer: press and hold down button 1. Resetting the trip meter
X Select the standard display menu
(Y page 125).
X Press and hold reset button 2until the trip
meter is reset. Clock
On vehicles with Audio 20, you can set the
time using the on-board computer
(Y page 131). Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
Distronic* mode:
One or two segments around the stored
speed light up. Rev counter
The red band in the rev counter indicates the
engine's overrevving range. The fuel supply is
interrupted to protect the engine when the
red band is reached.
! Do not drive in the overrevving range.
Doing so will damage the engine. H
Environmental note
Avoid driving at high engine speeds, as this
increases your vehicle's consumption
unnecessarily and pollutes the environ-
ment through increased emissions. Cont
rols
* optional
251_AKB; 5; 7, en-GB
wobuchh
,V ersion: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 119 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Service
242
Fitting the adapter
1
Connector with lug
2 Socket with groove
X Open the socket cover.
X Insert the connector with lug 1into
groove 2on the socket and turn the con-
nector clockwise to the stop.
X Make the cover engage.
X If you are using an adapter cable, secure
the cable to the trailer with cable ties.
! Make sure that there is sufficient cable
play so that the cable cannot become
detached when cornering. Service
ASSYST PLUS service interval display
ASSYST PLUS, the service interval display,
tells you when the next service is due. When-
ever a service is due, the following message
appears in the multi-function display:
Service A due in .. days
Service A due in .. km
Service A due now The letter indicates how much time the work-
shop will require to carry out the service work.
The letters displayed range from
Afor a short
service duration to Hfor a long service dura-
tion.
The service interval display ASSYST PLUS
does not record any periods of time during
which the battery is disconnected. In order to
maintain the time-dependent service sched-
ule, you should call up the service due date
and make a note of it before disconnecting
the battery. The alternative is to subtract the battery disconnection periods from the
service date shown on the display. Fading out the service message
1
Reset button
X Press the 1reset button on top of the
instrument cluster.
The service message goes out. Operation
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 242Dateiname: 6515_1825_02_buchblock.pdf; preflight

Battery
328
!
Only charge the installed battery with a
battery charger which has been tested and
approved by Mercedes-Benz. These battery
chargers allow the battery to be charged
while it is still installed. Otherwise, the vehi-
cle's electronic system may be damaged.
! Only use battery chargers with a maxi-
mum charging voltage of 14.8 V.
X Charge the battery. Observe the notes in
the operating instructions for your battery
charger.
X Refit the charged battery.
To do this, follow the steps described in
"Removing the battery" (Y page 327) in
reverse order.
i You can charge the battery using the
jump-start terminals. These are located on
the right when viewed in the direction of
travel.
X Open the bonnet (Y page 220). Jump-start terminals
1
Body earth point (negative terminal)
2 Positive terminal (under cover)
3 Cover Reconnecting the battery
! Always reconnect the battery in the
sequence described below. Never swap the
terminal clamps. You may otherwise dam-
age the vehicle electronics.
X Switch off all electrical consumers.
X Connect the positive terminal clamp and
secure the cover.
X Connect the negative terminal clamp.
X Connect the breather hose. Make sure that
a cell cap is fitted is fitted on the side. i
If the battery power supply has been inter-
rupted (e.g. if it has been reconnected), you
must carry out the following tasks:
R Set the time (Y page 132).
On vehicles with COMAND and a naviga-
tion system*, the clock is set automati-
cally
R Reset the sliding/tilting sun-
roof* (Y page 180).
R Reset the panorama sliding/tilting sun-
roof (Y page 183).
R Reset the function for folding the exterior
mirrors in/out automatically* by folding
the mirrors out once ( Ypage 91).
R Reset the side windows (Y page 107)Practical advice
* optional
251_AKB; 5; 7, en-GB
wobuchh
, Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 328 Dateiname: 6515_1825_02_buchblock.pdf; preflight