165 System settings
System settings
Setting the display design
Select “System” K “System Settings”
K “Display”.
Select “Day Mode” or “Night Mode” or
“Automatic”.
The dotRin front of the list entry indi-
cates the current selection.
i In the “Automatic” setting, COMAND evalu-
ates the automatic vehicle light sensor and auto-
matically switches over the display design.
Setting the time
i The correct time is essential for the follow-
ing system functions to operate correctly:
Route guidance on routes with time-depen-
dent traffic routing
Calculation of estimated time of arrival
Time stamps for calls received and calls di-
aled
Select “System” K “System Settings”
K “Time” K “Set Time”.1Sets the time
2Current date
To set value: Rotate ymz or slide
qmr.
To save setting: Press n.
i The increment for setting the minutes de-
pends on the situation. It is 30 minutes if the ve-
hicle is equipped with a navigation system and if
GPS signals are being received. It is one minute
if GPS reception is not available.
i If you change the time in 30 minute steps,
previously selected settings for time zone and
switching between summer time and standard
time are lost (
page 166).
Setting time/date format
Select “System” K “System Settings”
K “Time” K “Format”.
The format list appears. The dotsRin
front of the list entries indicate the cur-
rent setting.
i The abbreviations mean:
Date format: DD - Day, MM - Month,
YY/YYYY - Year
Time format: HH - Hour, MM - Minute for
24-hour and AM/PM format
To change format setting: Rotate
ymz or slide qmr.
To confirm selection: Press n.
To save setting and quit menu:
Slide omp.
Time settings
