Page 31 of 225
30 At a glance
Multifunction steering wheel
Dialling a number from the phone book
If your mobile phone is able to receive
calls, you can search for and dial a number
from the phone book in COMAND at any
time.
i You can enter new numbers in the phone
book using COMAND (
page 105)..
Select the “Tel” menu.
The multi-function display shows
“Phone ready”.
Press %, $ or # to call up the
phone book.
Press % or $ to select the name
you are searching for.
The stored names are displayed in al-
phabetical order.
If only one telephone number is stored
for a name: press
s or # to
start dialling.
The message “Connecting call” and the
selected number appear in the multi-
function display. The name also ap-
pears, provided it is stored in the phone
book. The selected number is stored in
the “Calls Dialed” list in COMAND
(
page 97).If a call is connected, the phone book
entry appears in the multi-function dis-
play.
or
If there is more than one number for
a particular name: press
s or
# to display the numbers.
Press % or $ to select the num-
ber you want to dial.
Press s or # to start dialling.
The message Connecting call and the
selected number appear in the multi-
function display. The name also ap-
pears, provided it is stored in the phone
book. The selected number is stored in
the “Calls Dialed” list in COMAND.
If a call is connected, the phone book
entry appears in the multi-function dis-
play.
i To exit the phone book without making acall,
press the t button. “Phone ready” appears
in the multifunction display.
i If you press and hold the % or $ but-
ton for more than one second, the on-board
computer scrolls through the names rapidly. Af-
ter four seconds, the rapid scroll speeds up. The
rapid scroll stops when you release the button or
reach the end of the list.
Redialing
The on-board computer saves the most re-
cently dialled names and numbers from
the mobile phone. This means that you do
not have to search through the entire
phone book.
Select the “Tel” menu.
The multi-function display shows
“Phone ready”.
Press s to go to the most recently
dialled number or name in the “Calls Di-
aled” menu.
Press % or $ to select the num-
ber or name you are looking for.
Press s or # to start dialling.
Page 78 of 225
77 Video
DVD video
From the control unit
Load DVD video (page 55).
COMAND loads the inserted medium
and starts playing it.
or
Press the function button y.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3 CD or DVD video). COMAND
then accesses all discs in the DVD changer.
If necessary select “Changer” and in
the media list select (
page 78) a DVD
video I.
From the COMAND controller
Select “Video” in the main function
menu.
To display: Slide qmr.
To hide: Slide qmr.
or
Wait apprx. eight seconds.
Control menu displayed
1Disc type
2Current track
3Current scene
4Elapsed track time
5Displays menu system
To display: Press n.
To hide: Slide qm and select “Full
Screen”.
Menu system displayed
1DVD-Video menu
2Pause function
3Stop function
4Media selection
5Sound settings
Switching to DVD videoDisplaying/hiding control menuDisplaying/hiding menu system
Page 185 of 225
184 Voice Control
Navigation
You can use voice control to:
enter a state
enter a province
enter a city
enter a district (center)
enter a street
enter a house number
enter an entire address
enter a zip code
find address
enter a point of interest
select one of your previous destina-
tions
call up route information
store a destination
display the map
enlarge/reduce the size of the map
listen to the destination memory
start and stop route guidance
switch the guidance instructions on
and off
To select the navigation application
press the ! button on the multi-
function steering wheel.
Give the “Navigation” command.
Press the ! button.
Give one of the navigation commands
explained below.
You cannot start the route guidance until
all the necessary address data has been
entered.
“Help navigation”/“Help”
Using the “Help navigation” command, you
can have all the essential commands for
the navigation system read out.
i If voice control fails to recognize your entry,
it is advisable to spell the name of the town and
street. Spell names of towns and streets when
abroad.
The system guides you completely through
the dialog to route guidance. As soon as a
valid address is entered (at least the town),
you can use the “Start route guidance”
command to start the route guidance.
“Enter state”/“Enter province”
You can use the “Enter state”/“Enter pro-
vince” command to change the state or
province setting of the navigation system.
Example of dialog:
sEnter state
tPlease enter the name of the state.
uThe system shows a numbered list
of possible state names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
Operation
Commands
Entering an address
