2008 MERCEDES-BENZ C-Class buttons

17 At a glance
COMAND control system
Tilting and folding COMAND display
! Do not place any objects in front of or be-
hind the COMAND display and/or secure any
objects to the COMAND display itself. This may
obstruct the movement when the display is being
folded in/out.
You can tilt the COMAND display vertically
or fold it in behind the cover. The buttons
are located centrally under the COMAND
display.
1Tilting display
2Folding in displayTilting display
Press 1 once or twice.
The display tilts downwards.
Back into standard position: Press
1 again.
Folding in display
Press 2.
The display folds in behind the
cover. The main function/operating
mode currently selected remains ac-
tive.
Folding out display
Press button on the display cover.
The display folds upwards.
Cleaning instructions
! Avoid touching the COMAND display at all
times. The display has a very sensitive high-gloss
surface, there is a risk of it being scratched. If
you do have to clean it, however, then use a soft,
lint-free cloth.
With the COMAND control unit you can

switch the COMAND on/off

adjust the volume

select the main functions/operating
modes directly

enter phone numbers and accept, re-
ject, initiate and end phone calls

load and eject CDs/DVDs or a PCMCIA
memory card
COMAND control unit

23 At a glance
Multifunction steering wheel
Use the buttons on the multifunction steer-
ing wheel to operate the multifunction dis-
play.
Luxury steering wheel illustrated
Multifunction steering wheelFunctionPage
1Multifunction display
2æ volume up
ç volume down
F Mute
t End and reject calls
s Accept and iniate
calls35
35
103
101
3! Activate
Voice Control
177
4L Cancel
Voice Control
Navigate one level
up in the menu
structure of the mul-
tifunction display
177
24
FunctionPage
5Select submenu or scroll
through lists
$ Upwards
% Downwards
Selecting a menu
& Right
( Left
# Confirm selection

34 At a glance
Operating COMAND
Switching to the current audio mode
To switch to the main function line:
Slide
qm.
To select “Audio” main function: Ro-
tate
ymz or slide omp.
To confirm selection: Press n.
The main display for the audio mode
selected last, e.g. CD audio, appears.
The selector bar is located in the dis-
play/selection window.
1Selector bar
Switching to radio mode
i You can also call up the required audio
mode directly using the
X or y buttons.
To select “Audio” again: Slide qm.
To confirm selection: Press n.
The “
Audio” menu appears.
To select “FM / AM Radio”: Rotate
ymz or slide qm.
To confirm selection: Press n.
The radio main display appears.
Tuning to a station manually
Slide qmr to highlight the lower menu
bar.
Rotate ymz or slide omp to select
“
FM” or “AM”.
Tune to a station by rotating ymz or
sliding
omp.
The red line (tuning indicator) moves
right or left and stops when a receiv-
able station is found.

35 At a glance
Basic functions of COMAND
i The COMAND components can be found on
(
page 14). Operating examples can be found
on (
page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. for volume setting the æ, ç
buttons, (
page 23).
Press the rotary/push button x.
or
Press the display cover button
The cover opens up and the
COMAND display folds out. A warning
message appears. COMAND opens the
last active menu.
i When COMAND is switched off, playback of
the current audio or video source is also
switched off.
To switch on/off: Press V.
The sound from the active audio or
video source is switched on or off.
i When the sound is switched off, the symbol
X appears in the status line.
If you change the audio or video source or alter
the volume, the sound is automatically switched
on again.
i Announcements from the navigation system
can still be heard with the sound switched off.
Switching navigation announcements
on/off
Press V during the announcement.
i The navigation announcements are
switched on again after restarting route guid-
ance or after switching COMAND off/on using
x.
To set: Turn the rotary/push button
x.
The volume of the selected audio or
video source changes.
Volume of navigation announcements
You can set the volume for navigation an-
nouncements independently of the volume
for the active audio or video source.
During a navigation announcement:
Turn the rotary/push button x.
Setting volume for phone calls
The volume for hands-free operation can
be set during an active phone call.
Turn the rotary/push button x.
Basic functions of COMAND
Switching COMAND on/off
Mute
Setting the volume

40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(

page 14) and (
page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (

page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (

page 42)
and SatRadio* mode (

page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (
page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (

page 60)
Music Register (
page 67)
Aux mode (
page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio

42 Audio
Radio
You can switch the radio between the FM,
AM, and WB wavebands.
Select “FM” 7, “AM” 6 or “WB” 5 in
the radio display.
The last selected station in the select-
ed waveband is heard.
i In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
Press the X function button on the
control unit repeatedly until the desired
band is selected.
i Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio* mode (

page 47). Pressing again will
switch back to FM radio mode.
You can tune to a station via station search
or by manual frequency input.
Tuning to a station via station search
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a station via manual
frequency input
Select “Radio” K “Enter Frequency” in
the radio display.
An input menu appears.
or
Press ß on the control unit.
To enter a frequency: Press number
buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a station via the station
memory
Select “Presets” in the radio display.
or
Press n if the display/selection win-
dow is highlighted.
The station memory appears. The
dotR in front of a preset indicates that
the currently tuned station is stored
there.
To select a station: Rotate ymz or
slide qmr.
To tune to a station: Press n.
or
Press a number key, e.g. 4, on the
control unit.
Switching wavebands Tuning to a station

47 Audio
Satellite radio*
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a channel or a menu or scroll-
ing through lists (

page 23).
Switching on
See “Subscribing to satellite radio” for im-
portant subscription information
(

page 46).
From another main function
Select “Audio” K “Audio” K
“SatRadio”.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “SatRadio”.
i No Satellite receiver:
The message “No Satellite Radio”
will appear in
a window.
The message will appear at start up or
when the signal is not available.
After the COMAND acquires the signal, the
Satellite radio display will appear. The sta-
tion last tuned to will begin to play.Satellite radio main menu
1SatRadio main display
2Channel name
3Memory preset number
4Selected category/channel number
5Channel info (short)
6Sound settings
7Category list
8Channel info (detailed)
9Preset channel list
aSatRadio menu
i You can display 5 in full:
Channel info (
page 50)
Satellite radio operation

49 Audio
Satellite radio*
Press ß on the control unit.
To enter a channel: Press correspond-
ing number buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the channel en-
tered.
Selecting a channel from the SatRadio
channel list
Select “SatRadio” K “Channel List” in
the SatRadio menu.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
Memory functions
i There are 10 presets available.
You can use the following functions:
Saving channels manually
Selecting a channel from the Satellite
preset memory (

page 50)
Storing channels manually
Press n if the display/selection win-
dow is highlighted.
or
Select “Presets” on the SatRadio sub-
menu bar.
In both cases, the channel memory will
appear. The dotRin front of a preset
indicates that the currently tuned chan-
nel is stored there.
Station memory
To select a preset: Rotate ymz or
slide qmr.
To store a channel to a selected pre-
set: Press and hold n until a signal
tone sounds.
or
Press and hold a number key, e.g. 4,
until a signal tone sounds.
The channel is stored.