2008 MERCEDES-BENZ C-Class Media

78 Video
DVD video
Slide and hold omp until the desired
point is reached.
or
Press and hold G or H on the
control unit until the desired point is
reached.
The control menu will appear.
In DVD video mode, if necessary dis-
play the menu system (
page 77).
Select “Changer”.
The media list appears. The dotRindi-
cates the medium currently playing.
Media list
1Symbol for DVD video
2DVD Video currently playing
To select DVD video I: Rotate ymz
or slide qmr.
Press n.
COMAND switches the medium.
i If you select a CD-/DVD-audio or MP3 me-
dium, the system switches to the corresponding
audio mode (
page 60).
Further information on the media list can be
found on (
page 62).
In DVD video mode, if necessary dis-
play the menu system (
page 77).
To interrupt playback: Select h.
The g display changes to T.
To resume playback: Select T.
Playback will then continue at the point
at which it was interrupted. The menu
system is hidden.
To stop playback: Press h again
when playback is stopped.
or
Select h twice in immediate succes-
sion during playback.
The option selector remains at T.
To restart playback: Select T.
Playback will start from the beginning.
The menu system is hidden.
Fast forward/reverse
Selecting DVD media
Stop function

102 Telephone
Making calls
To select call: Rotate ymz or slide
qmr.
To initiate call: Press n.
Initiating a call to a call list entry or
COMAND phone book entry
Open the call list and select an entry
(
page 97).
or
Open the COMAND phone book and
select an entry (
page 104).
To initiate call: Press n.Phone mode with a single call
1Other party
2Symbol for active phone connection
3Switches the hands-free microphone
off or on
4Sends DTMF tones (not possible with
all mobile phones)
5Device name of the connected mobile
phone
6Terminates callSwitching hands-free microphone on or
off
Open the phone main menu
(
page 92).
To switch off: Select “Mic Off”.
When the microphone is switched off
the symbol > appears in the main ar-
ea.
To switch on: Select “Mic On”.
The symbol > disappears
Sending DTMF tones
i This function is not possible with all mobile
phones.
Answering machines or other devices can
be controlled via DTMF tones, e. g. for re-
mote query functions.
To transmit individual characters:
During a call select the required char-
acters using the COMAND controller.
or
Press the corresponding button on the
COMAND control unit keypad.
Every selected character is transmitted
immediately.
Functions during a single call

103 Telephone
Making calls
Transmitting phone book entry as a
sequence of characters: Select
“Name”.
Select the desired phone book entry.
The entry is transmitted immediately as
a sequence of characters.
To switch back to call display: Select
“Back”.
Ending an active call
Switch display to phone mode if neces-
sary (
page 92).
To terminate call: Select 4.
or
Press W on the COMAND control unit
or thet button on the multifunc-
tion steering wheel.
Call waiting
i The call waiting function must be supported
and activated by the phone provider.
If you are conducting a single call and you
receive another, the second call number is
entered into the received calls list and a
signal tone will sound.
You can accept the waiting call with the
mobile phone. The previous call is put on
hold. You then have two calls, the accept-
ed call is the active call.

108 Telephone
Address book
Details screen for private data
1Back to the previous menu
2Selected data field
3k symbol for private data
4Calls up options
5l symbol for business data
Selecting another data field
Rotate ymz or slide qmr.
Displaying abbreviated content in full
Select “Options” K “Details”.
The complete display appears.
To close complete display: Slide
omp or press n.
Closing details screen
Select “Back”.
Changing an address book entry
Search for an address book entry
(
page 106).
Select “Options” K “Change Entry”.
or
Display details for an address book en-
try.
Select “Options” K “Change Entry”.
The input menu with the data fields ap-
pears.
Continue from the step “Switching data
field” in the “Creating a new address
book entry” section (
page 105).
Changing category of a
phone number data field
Display the details for an entry and
highlight the phone number data field
(
page 107).
Select “Options” K “Change Catego-
ry”.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
If necessary select “Preferred”.
Depending on the previous status, the
option will be switched on D or off C.
The phone number is displayed in the
phone book as the first number and
can be dialed immediately.
Select “Save”.
The new category is saved.
Changing entry

145 Navigation
POI input
i If “ALL TYPES” is selected in the list, the POI
list contains all the POIs in all subcategories of
the “RESTAURANT” main category that are locat-
ed in the search radius. The list item “OTHER” at
the end of the list contains all the POIs not as-
signed to any subcategory in the “RESTAURANT”
main category that are located in the search ra-
dius.
The selected main category contains no
subcategories:
Selecting it immediately opens the POI list.
The POI list then contains the available
POIs for the main category that are located
in the search radius.
POI list
As an example, the illustration below
shows the POI list for the main category of
“RESTAURANT”, “BREWPUB” subcategory
in the vicinity of the location.1Direction of destination
2Air-line distance to the destination
3Point of interest
4Selected category or subcategoryi The display 1 only appears if you have en-
tered a POI search in the vicinity of the current
position.
The display
2 is not displayed if you have en-
tered a POI within a particular city and have only
entered the state/province and the city.
Depending on the POI category selected,
COMAND uses different reference points when
determining the distance to the destination:

In the vicinity of the location: The distance to
the POI from the current vehicle location.

Local area of destination: The distance to
the POI from the destination entered.
Selecting a POI
Select the desired POI.
The full address of the selected POI is
displayed.
i If the selected POI has a telephone book en-
try, you can make a call to the POI.
1POI with address
2Initiates a call, if available
3Starts route calculation
4Cancels selection
To cancel selection: Press the í
button.
or
Select “Back”.
The POI list appears.


152 Navigation
Route guidance
Once you have reached your destination, a
checkered flag is displayed and route guid-
ance is ended automatically.Route guidance to an off-road destina-
tion
COMAND can also guide you to destina-
tions that are within the area covered by
the digital map, but are not themselves in-
cluded on the map.
Such destinations are off-road destina-
tions, which you can enter, for example, by
entering the destination via the map.
In this case, COMAND guides you on roads
known to the system for as long as possi-
ble using navigation announcements and
route guidance displays.1Off-road destination
2Off-road route segment (dashed line)
3Current vehicle location, tip of the tri-
angle points in the vehicle’s direction
of travel
4Off-road, no road name available
Just before reaching the last known point
on the map, the message “You will enter an
area with unreliable map data in xx miles” is
announced.
When the vehicle is entering the area that
is not covered by the digital map, the
screen is split. On the right half of the
screen an arrow appears that points to the
off-road destination
1 and the system
announces: “Please follow the arrow on the
display”. When the vehicle comes close to
the destination the message “Destination
region reached” is given.
Destination or destination region
reached
Off-road and off-map
G Warning
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver’s sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their ap-
propriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consider-
ation by the COMAND system.

214 Technical terminology
GPS
(G
lobal Positioning System)
System for geographic position finding.
Satellite signals can be compared by
the receiver in the vehicle with a digital
map (e. g. on CD-ROM) and then used
for position finding and navigation.
Gracenote Media Database
Media database that is stored on
->COMAND’s hard drive.
Gracenote
® music recognition techno-
logy
Music recognition software that is
stored on
->COMAND’s hard drive. If
the selected audio CD does not contain
any
->CD text, ->COMAND can
recognise unknown audio tracks in CD
audio mode with the aid of this
software and depict this in corres-
ponding displays.
GSM
(G
lobal System for Mobile
Communications)
International transmission standard for
mobile phones. This permits you to
make phone calls with your mobile
phone even when abroad. The trans-
mission method is digital.ID3 tag
Additional information which may be
included in MP3 files (e.g. track, artist,
album).
ISO9660
Standard for recording data on CDs.
Joliet
Standard for recording data on CDs.
Kilobyte
Designation for an amount of informati-
on in digital technology.
LOGIC7
®
Multi-channel surround technology
from the professional audio industry,
which plays back 5.1 and stereo recor-
dings in surround quality. LOGIC7
® cre-
ates natural 360° sound characteris-
tics for all seats.
MLP
(M
eridian Lossless Packing)
Optional format for audio data on a
DVD-audio.
MP3
The term used in everyday speech for
->MPEG1 Audio Layer 3.MPEG1 Audio Layer 3
A means of compressing audio data
which is subject to losses.
Multisession
A method for recording data, e.g. for
CDs. Data is written to the CD in a num-
ber of sessions.
Music Register
Memory for the audio main function to
which you can copy music files in MP3
format.
Notebook
Portable personal computer (PC).
NTSC
(N
ational Television Systems Commit-
tee)
TV standard, widespread mainly in the
US.
Folder
Alternative designation for directories.
Data saved on a storage medium can
be organised into directories for impro-
ved clarity. Can be likened to a filing ca-
binet containing a number of folders,
each of which holds a number of docu-
ments.

215 Technical terminology
PAL
(P
hase Alternating Line)
TV standard, widespread mainly in Eu-
rope.
PCM
(P
ulse Code Modulation)
Optional format for audio data on an
DVD-audio or DVD-video.
The audio data are provided in com-
pressed form, similar to ->MP3,
->MPEG1 Audio-Layer 3, but in contrast
are not subject to losses.
PDA
(P
ersonal Digital Assistant)
Small portable computer featuring
functions for managing dates, addres-
ses and appointments, for example.
PIN
(P
ersonal Identification Number)
Personal identification number, to be
entered to activate the telephone.
Provider
Service provider offering access to a
mobile phone network or services
within the network.RDS
(R
adio Data System)
Digital data transmission system for
FM radio stations.
Region code
Because of the region code, video
DVDs can only be played on DVD
equipment with the same code as that
of the ->DVD. The factory setting of the
COMAND is code 2 (

page 75). It can
only play video DVDs which also have
code 2 or code 0 (no region code).
Root directory
The uppermost directory on a data sto-
rage medium.
Scan rate (->MP3)
Indicates the frequency at which volta-
ge samples are taken during the con-
version of an analogue signal into a
digital signal. The analogue-to-digital
converter converts the samples into di-
gital signals.UDF
(U
niversal Disc Format)
Standard for recording data, e.g. for
DVDs.
vCard
An address book entry may contain up
to 8 telephone numbers that are placed
in a vCard (business card). When an
entry of this kind is stored in the mobile
phone’s telephone book, a separate
entry in the vCard is created there for
every telephone number.
Voice Control
A system which can be used to operate
the ->COMAND or the telephone using
speech.
WAV
Standard audio file format for storing
audio on PCs.
WMA
(W
indows® Media Audio)
A means of compressing audio data
which is subject to losses.