2008 MERCEDES-BENZ C-Class Comand Manual

8 Introduction
Symbols
You will find the following symbols in these
operating instructions:
* The asterisk identifies optional
equipment. Since not all models
have the same standard equip-
ment, your COMAND system equip-
ment may deviate from some
descriptions and illustrations.
! Highlights hazards that may result in dam-
age to your COMAND.
i Helpful hints or further information you may
find useful.
This symbol points to in-
structions for you to follow.
A number of these symbols
appearing in succession in-
dicates a multiple-step pro-
cedure.
The continuation symbol
marks an interrupted proce-
dure which will be continued
on the next page.
(
page 9) This symbol tells you where
to look for further infor-
mation on this subject.
-> This symbol is used in the
glossary. It indicates that
the term immediately follow-
ing the symbol is also ex-
plained in the glossary.
“Display”Messages, menu items or
soft key names appearing in
the COMAND color display
are printed in the style
shown here.
SymbolsG Warning
Warning notices draw your attention to ha-
zards that may endanger your health or life,
or the health or life of others.


9 Introduction
Operating safety
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful in-
terference, and
(2) This device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Operating safety
G Warning
Any alterations of electronic components or
software can cause malfunctions.
Radio, satellite radio, amplifier, DVD chang-
er, navigation module, telephone and Voice
Control systems are interconnected. There-
fore, if one of the components is not opera-
tional, or has not been removed/ replaced
properly, the function of other components
could be impaired.
Such conditions might seriously impair the
operating safety of your vehicle.
We recommend to have any service work on
electronic components carried out by an au-
thorized Mercedes-Benz Center.
G Warning
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings while the vehicle is at a
standstill, and operate the system only
when permitted by road, weather and traffic
conditions.
Bear in mind that at a speed of just
30 mp/h (approximately 50 km/h), your car
covers a distance of 44 feet (approximately
14 m) every second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encour-
age the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read nav-
igational maps, instructions, or downloaded
information.
G Warning
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’s per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.

10 Introduction
Operating safety
! NOTE: This equipment has been tested and
found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial envi-
ronment. This equipment generates, uses and
can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruc-
tion manual, may cause harmful interference to
radio communications.G Warning
Change or modification not expressly ap-
proved by the party responsible for compli-
ance could void the user's authority to
operate this equipment.
G Warning
This transmitter must not be co-located or
operated in conjunction with any other an-
tenna or tranmitter.
G Warning
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio fre-
quency (RF) Exposure Guidelines in Supple-
ment C to OET65.
This equipment has very low levels of RF en-
ergy that is deemed to comply without max-
imum permissive exposure evaluation
(MPE). But it is desirable that it should be in-
stalled and operated with at least 8 inches
(20 cm) and more between the radiator and
person's body (excluding extremities:
hands, wrists feet and legs.)

11 Introduction
Operating safety
DaimlerChrysler declares herewith that
this device conforms to the basic
requirements and the other relevant
regulations of Directive 1999/5/EC (RTTE
Directive).
Please bear the following information in
mind when using the COMAND:

The safety instructions in this guide

Road Traffic Regulations
i Tampering with electronic components or
systems (e.g. radio, DVD changer) and their soft-
ware may result in malfunctioning. Systems
which have not been changed may be affected
due to the connectivity of the electronics.
Malfunctions of the electronics can seriously en-
danger the operational safety of your vehicle.
i Always have all work or modifications to
electronic components carried out by a qualified
specialist workshop with the necessary exper-
tise and tools for any work required.
DaimlerChrysler recommends a Mercedes-Benz
Service centre for this purpose.
Especially for safety-related operations and op-
erations on safety-related systems, servicing by
a qualified specialist workshop is essential.
For safety reasons, some COMAND func-
tions are restricted or not available when
the vehicle is moving. This can be recog-
nized, for example, from the fact that cer-
tain menu items cannot be selected or the
COMAND displays a corresponding mes-
sage.
Declaration of conformity regarding
the distribution of telecommunica-
tions equipment
Intended purpose
Function restrictions when driving
the vehicle

12

13 At a glance
COMAND control system . . . . . . . 14
Multifunction steering wheel . . . 23
Operating COMAND . . . . . . . . . . . 31
Basic functions of COMAND . . . . 35

14 At a glance
COMAND control system
COMAND comprises

the COMAND display

the COMAND control unit with DVD
changer

the COMAND controller with the Back
and Clear button
With COMAND you can operate the follow-
ing main functions:

the navigation system

the audio function with the
radio, SatRadio*, disc (CD audio, DVD
audio or MP3 mode),
PCMCIA memory card (MP3 mode),
Music Register and Audio Aux operat-
ing modes

the telephone and the address book
function

DVD video

the system functions
COMAND control systemFunctionPage
1COMAND display15
2Tilting and folding COMAND
display
16
3COMAND control unit with
DVD changer
17
4COMAND controller20
5Clear button (CLR)22
6Back button22
COMAND components

15 At a glance
COMAND control system
The currently selected function and the
associated menus are shown on the
COMAND display. The COMAND display is
divided into several areas.
1Status line
2Main functions
3Main area
4SubmenusThe status line 1 displays the time and
the current telephone status.
You can change the main function using
the menu bar 2. The selection is made us-
ing the COMAND controller (
page 20).
In this example, the Audio main function is
set to the radio mode and the main area 3
is active.
i The arrangement of the menus can vary, de-
pending on the equipment. The menus for the full
equipment version are shown in this guide.
Menu overview
Having selected a main function, you will
see the submenu at the bottom edge 4 of
the COMAND display.
Additional menus are available at the top
of the COMAND display 2 for the naviga-
tion, audio and telephone main functions
(
page 16).
COMAND display