2008 MAZDA MODEL CX-9 Owners Manual (in English)

Page 105 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (105,1)
2. Insert a screwdriver into the slot and
push the tab to remove the key from
the transmitter.
Ta b
3. Insert a screwdriver into the slot and
gently pry open the transmitter.
4. Re

Page 106 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (106,1)
Door Locks
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended
in a parked vehicle is dangerous. In
hot

Page 107 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (107,1)
qLocking, Unlocking with Door-
Lock Knob
To lock any door from the inside, push the
door-lock knob.
To unlock, pull it out.
This does not operate the other door
locks.
Unlock Lock

Page 108 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (108,1)
NOTE
Holding the key in the unlocked position in the
drivers door lock for about a second unlocks
all doors and the liftgate. To unlock only the
drivers door, insert the key into

Page 109 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (109,1)
Liftgate
WARNING
Never allow a person to ride in the
luggage compartment:
Allowing a person to ride in the
luggage compartment is dangerous.
The person in the luggage
compartment c

Page 110 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (110,1)
NOTE
If the vehicle battery is dead or there is a
malfunction in the electrical system and the
liftgate cannot be unlocked, perform the
following procedure as an emergency measure

Page 111 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (111,1)
WARNING
Be sure to watch the power liftgate as
it opens or closes, and make sure that
it closes completely:
Opening or closing the power liftgate
while not watching it move is
dang

Page 112 of 506

MAZDA MODEL CX-9 2008  Owners Manual (in English) Black plate (112,1)
NOTElDo not apply unnecessary force to the
power liftgate when it is opening/closing
electrically. Unnecessary force on the
liftgate may cause it to reverse direction of
movement a