2008 HONDA CIVIC COUPE Owners Manual

Page 73 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual To lock the passenger’s door when 
getting out of the vehicle, pull out
the lock tab and close the door. To
lock the driver’s door, pull and hold
the outside door handle then pull out
the lock tab

Page 74 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual To lock the passenger’s door when 
getting out of the vehicle, pull out
the lock tab and close the door. To
lock the driver’s door, pull and hold
the outside door handle then pull out
the lock tab

Page 75 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual To lock the passenger’s door when 
getting out of the vehicle, pull out
the lock tab and close the door. To
lock the driver’s door, remove the
key f rom the ignition switch and pull
out the lock t

Page 76 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual CONT INUED
Your vehicle has customizable 
settings f or the doors to
automatically lock and unlock. There
are default settings for each of these
f eatures. You can turn of f or change
the settings for

Page 77 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual Release the switch, and within 5 
seconds, turn the ignition switch
to the LOCK (0) position.Make sure the shif t lever is in the
Park (P) position. 
Turn the ignition switch to the ON 
(II) position,

Page 78 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual CONT INUED
Turn the ignition switch to the ON 
(II) position, and make sure to
close the driver’s door.push and hold the
brake pedal, and move the shift
lever out of the Park (P) position. Pushandho

Page 79 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual Turn the ignition switch to the ON 
(II) position, and open the driver’s
door.Pushandholdtherearof the
master door lock switch on the
driver’s door. You will hear a click,
and after about 5 second

Page 80 of 303

HONDA CIVIC COUPE 2008 8.G Owners Manual CONT INUED
Or, until you hear two more 
clicks (af ter about 10 seconds)
to activate.
Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position. Make sure the shif t