
Downloaded from www.Manualslib.com manuals search engine 197Electrical Accessories
Common faults and solutions
If the following faults occur while using this machine, please refer to \
the troubleshooting guide.
General problems
SymptomsCausesSolutions
Cannot start
Burnt fuseReplace with a new fuse of the same
specification
Vehicle supply battery fuse is burntReplace the vehicle supply battery fuse
Illegal operation and other factorsPress the reset button to reset the system
Remote controller doesn't
work
Remote controller battery is lowReplace the remote controller battery
Remote controller battery is reversely
installedProper battery installation
No sound or sound is too low
The volume of the head unit or the
connected component is too low
Raise the volume of the head unit or the
connected component
Speaker possibly damagedCheck the speaker
The sound balance settings lean to one
sideAdjust the sound balance
Speaker's connection wire touches the
vehicle body
Use insulated conductor to connect the
speaker and use insulating cement to cover
the exposed connections
Disc is not genuineUse a genuine disc
Speaker is incorrectly connectedPlease refer to the "Equipment connection
drawing" to correct the connection
The sound quality is poor or
distorted
Speaker's connection wire touches the
vehicle bodyCheck the speaker's connection wire
"MUTE" wire touches the metal parts of
the vehicle body
Ensure the telephone silence control wire
is insulated from the vehicle body
A connection error between ignition coil
ACC and positive power wire "BATT"
Please refer to the "equipment connection
drawing" to correct the connection
Common display characters and fault meaning
Display characterMalfunctionSolutions
No Disc
Disc is dirtyClean or replace the disc
The read side of the disc is inserted
upside-down
Insert the disc into the player with the
label side up
No disc in the playerInsert the disc
Bad disc
Disc is dirtyClean or replace the disc
The read side of the disc is reversely
inserted
Insert the disc into the player with the
label side up
Unknown disc Player cannot read discPlease use discs supported by this player
Region error The region code of this disc does not
match the region code for this player
Use discs that have a region code identical
to this player's

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual198
TFT display screen common faults and solutions
SymptomsCausesSolutions
No image is shown on the
display screen, only a warning
image
Parking control wire "PRK SW" is not
properly connected
Please refer to the "Equipment connection
drawing" to correct the connection
Abnormal display status, like
pulsing lines, appear in the
image
The DVD output image format does not
match the display screen formatChange the screen format to automatic
Some non-genuine discs’ actual display
format do not match the labeled formatUse a genuine disc
Video wire is damaged Replace the video wire
Video wire connection error Please refer to the "Equipment connection
drawing" to correct the connection
Displayed characters are
messed up or displayed
incorrectly
Incorrect operation Shutoff and restart, or switch to another
source and then try again
SymptomsCausesSolutions
Poor lock channel effect
Automatic antenna fails to extend
Check if the radio reception automatic
a n t e n n a ' s c o n t r o l w i r e A N T. C O N T i s
properly connected. Please refer to the
"Equipment connection drawing"
Failure to connect the radio reception
antenna
P r o p e r l y c o n n e c t t h e r a d i o r e c e p t i o n
antenna. Please refer to the "Equipment
connection drawing"
Local search function is in the on-state Switch off the local search function, please
refer to the "Local search"
Radio reception failure and solution
DVD playing faults and solutions
SymptomsCausesSolutions
Cannot insert discThere is a disc in the playerEject the disc from the inside of the player
and insert a new one
Disc is unable to play
Disc is scratched and unable to be readReplace the disc
Disc is too dirty or wetClean the disc with a soft cloth
Laser head is dirtyClean the laser head with a laser head
cleaning disc
The disc is not supported by this playerCheck the disc type
Child lock grade too highChang the child lock settings
The read side of the disc is inserted
upside-down
Insert the disc into the player with its label
side up
The region code of the disc does not
match the region code of the player
Use discs that have a region code identical
to this player's
Subtitle does not displayThe disc does not contain a subtitle fileUse discs containing a subtitle file
Language or subtitle switch
does not work
The disc only has one type of language
or subtitle
Use discs containing multi-channel voice
or subtitle files
Multi-angle switch does not
work
The disc only has one visual angleUse discs that support multi-angle play
The section in play does not support
multi-angle
Select a section that supports multi-angle
play

Downloaded from www.Manualslib.com manuals search engine 199Electrical Accessories
SymptomsCausesSolutions
Image is blurred and distortedThe disc is copy protected
The player is compatible with the copy
system, so if the disc is copy protected, it
may not be able to play, and is not a problem
with the player
PBC function has no effect
when playing a VCD discThe disc contains no PBC functionUse discs that support the PBC function
Repeat function and album/
time search are unavailablePBC is set to onTurn off the PBC function
SymptomsCausesSolutions
Cannot play MP3
Disc is scratched or dirty Clean the disc with soft cloth
Laser head is dirtyClean the laser head with a laser head
cleaning disc
The disc is not supported by this playerPlease use discs supported by this player
The read side of the disc is inserted
upside-down
Insert the disc into the player with its label
side up
The sound is not smooth when
playing MP3
The disc is too dirty or scratchedClean or replace the disc
Partial content is damagedReplace the disc
Bad record conditionRe-record the disc
Name of MP3 file is not
displayed normallyIrregular file nameDo not use Chinese names
MP3 playing faults and solution

Downloaded from www.Manualslib.com manuals search engine 201Electrical Accessories
1. This player is used on vehicles with a 12 V battery and negative ground. If this player is to be installed
on a vehicle with a 24 V battery, please install voltage reduction equipment.
2. To avoid short circuiting the electrical system, cut off the battery negative end's connection wire before
installation.
3. Please arrange the connection wires at fixed locations, as to make sure they will not make contact
with any portable parts, such as the parking brake control mechanism assembly, gear lever, the seat's
fixed track, and so on. Please do not arrange the wires in a heat source area, like near the discharge
outlet of the heater, etc. Otherwise the heat source will cause the insulating layer to melt or wear out,
and then lead to a short circuit between the connection wire and the veh\
icle body.
4. Do not put the power cord through the mounting hole into the engine box and then connect it to the
battery. Otherwise it might damage the power cord and then lead to a short circuit between the power
cord and the vehicle body.
5. When changing the fuse, please use the specified 15 A fuse. Fuses with an unmatched size will lead
to abnormal operation, and even damage the player or cause a fire hazard\
.
6. Please do not share the player's power supply with other equipment, otherwise it might lead to a
malfunction due to overloading.
7. Please wrap up the exposed places of the wire with insulating cement to \
avoid short circuiting.
8. Bind up all the connection wires well to avoid any connecting term inal touching the player or other
mental parts of the vehicle body and leading to a short circuit.
9. When switching the player's power on, the external connection amplifier's controlling signal will output
through the lead wire P.CONT. If the player is connected with an external connection amplifier, please
do not connect the lead wire P.CONT to the amplifier's supply terminal, otherwise it will cause a
malfunction.
10. The player's outputting terminal must not be grounded, otherwise the amplifier may burn out. Please
do not use a 3-wire type speaker system which shares the ground cable. Please do not connect the
speaker wire to the vehicle body.
11. The maximum rated power of the speaker connected to this player is 50 W , resistance value is 4 Ω.
Control wire connection areas of importance

Downloaded from www.Manualslib.com manuals search engine 243Vehicle Body
3. Remove the dashboard center console left & right side
trim strip assembly.
4. Remove the glove box assembly.
5. Remove the combination switch cover assembly.
(a) Remove the three screws.
(b) Pry the upper and lower cover off, and remove the up-
per and lower cover of the combination switch.
6. Remove the combination meter hood assembly.
(a) Remove the two buckles.
(b) Remove the combination meter hood assembly.
7. Remove the dashboard center console assembly.
(a) Remove the air-conditioner's control buttons.
(b) Remove the four screws.
(c) Remove the dashboard center console assembly.
8. Remove the CD player (refer to CD player removal for
details).
9. Remove the left and right A-pillar protective panel (refer
to inner decorative panel removal for details).
10. Remove the combination meter (refer to combination
meter removal for details).
Left trim strip
Screw
Buckle
Glove box assembly
Right trim strip
Combination switch cover assembly
Combination meter hood
Dashboard center console assembly
Screw