2008 CHEVROLET EQUINOX light

[x] Cancel search: light

Page 179 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual CHECK TIRE PRESSURE
This message displays when the pressure in one or
more of the vehicle’s tires needs to be checked.
This message also displays LEFT FRONT, RIGHT
FRNT (Front), LEFT REAR, or RIGHT

Page 180 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual ENGINE OVRHEATD (Overheated)
STOP ENGINE
Notice:If you drive your vehicle while the engine
is overheating, severe engine damage may occur.
If an overheat warning appears on the instrument
panel cluste

Page 181 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual OIL PRSSURE (Pressure) LOW
STOP ENGINE
Notice:If you drive your vehicle while the engine
oil pressure is low, severe engine damage may
occur. If a low oil pressure warning appears on the
Driver Inform

Page 182 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual SERVICE ALL WHEEL DRIVE
If your vehicle has the All-Wheel Drive (AWD) system,
this message displays along with the service all-wheel
drive light if a problem occurs with this system. See
Service All-W

Page 183 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual SERVICE STABILITRAK
This message displays if there has been a problem
detected with the StabiliTrak®System. A warning light
also appears on the instrument panel cluster. See
Traction Control System (

Page 184 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual STABILITRAK NOT READY
This message may display and a warning light on the
instrument panel cluster may be on after �rst driving the
vehicle and exceeding 30 mph (48 km/h) for 30 seconds.
SeeTraction C

Page 188 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual Press the vehicle information button until AUTO
UNLOCK appears on the DIC display. Press the
set/reset button to access the settings for this feature.
Then press the vehicle information button to scro

Page 189 of 436

CHEVROLET EQUINOX 2008 1.G Owners Manual NO CHANGE:No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while
the desired setting is displayed on the DIC.
REMOTE UNLOCK
This