2008 AUDI S6 ECO mode

[ i J Tips
• The digital c lock and the odometer are turned on for about 30
seconds when the driver's door is opened.
• When the ignition is turned off, the odometer reading and the
digital clock with date display can be switched on for about
30 seconds by pressing the !CHECK] button~
page 16, fig. 5. •
Speedometer with odometer
The speedometer shows you the vehicle speed, and the
odometer shows you how many miles (kilometers) you
have driven.
Fig. 4 Instrument
c luster Odometer and
reset button
The odometer and trip odometer are located inside the speedom ­
eter.
• USA models - Miles
• Canada models -Kilometers
You can switch the disp lay from miles to kilometers and vice versa
via the MMI.
Lower odometer
The lower odometer shows the total number of miles (kilometers)
driven .
Contro ls and eq uip­
ment
Instruments and warning /indicator lights
Upper odometer (trip odometer)
The upper odometer shows the total number of miles (kilometers)
driven since you last reset the odometer to zero. You can use this
odometer when you want to keep track of how many miles (kilome ­
ters) you have driven for a single trip or errand. The last digit indi­
cates 1/10 of a mile (100 meters).
You can reset the trip odometer to zero by pressing the Reset button
~ o.o.
Malfunction message
If there is a malfunction somewhere in the instrument cluster,
dEF
wil l appear in the trip odometer and will stay on . Contact your
authorized Audi dealer to have the problem corrected .
Immobilizer
When the ignition is switched on, the data on the ignition key are
scanned automatically.
If an unauthorized key was used,
SAFE is displayed continuously in
the odometer display field. The vehicle cannot be operated
~ page 51.
[ i J Tips
• The digital clock and the odometer are turned on for about 30
seconds when the driver's door is opened.
• When the ignition is turned off, the odometer reading and the
dig ital clock with date display can be switched on for about
30 seconds by pressing the
I CHECK] button ~ page 16, fig. 5. •
Fuel gauge
The fuel gauge only works when the ignition is on .
When the needle reaches the reserve mark, the~
page 36
symbo l appears in the instrument cluster display as well as the
message
Please refuel. There are approximately between 1.8 and 2.4 ~
Vehicle care I I Technical data

Instruments and warning/indicator lights
For more information about the ESP=> page 258. •
Airbag system
~ (USA models) / !_q· (Canada models)
This warning/indicator light monitors the airbag and the
tensioner systems.
The I (USA mode ls) t!l (Canada models) warning light illuminates
for a few seconds each time you switch on the ignition .
If the m (USA models)
t!.! r (Canada models) warning light does not
go out, or if it illuminates while you are driving, or if it starts to blink,
then there is a malfunction somewhere in the system. If the light
does not illuminate when you switch on the ignition, this also
means there is a malfunction.
& WARNING
If you have a malfunction in the airbag system, contact your autho­
rized Audi dealer immediately. Otherwise the airbag or the belt
tensioner may not work properly in an accident . •
Tire pressure monitoring system -telltale
indicator lamp
J
The warning/indicator light appears in the event of a
significant loss of air pressure.
The i warning/indicator light il luminates for a few seconds after
the ignition is turned on as function check and then goes out.
If the .., symbol appears, pressure is too low in at least one tire.
When the system detects a malfunction, the warning/indicator light
wil l flash for approximately one minute and then remain continu­
ously illuminated . This sequence wi ll continue upon subsequent vehicle starts up as long as the malfunction exists. Contact your
authorized Audi dealer and have the malfunction corrected.
For more information =>
page 44. •
Turn signals ¢ ¢
The indicator light blinks when you use either turn signal.
Whenever you use the left¢ or the right¢ turn signal, the indicator
light blinks . When you use the emergency flashers, both indicator
lights flash.
If one of the turn signa l light bu lbs burn out, the turn signal wil l
blink twice as fast as normal. •
Malfunction Indicator Lamp (MIL) U
The Malfunction Indicator Lamp (MIL) is part of the On-Board Diag­
nostic (08D Ill system . The symbo l lights up when the ignition is
turned on and will turn off after the engine has started and has
settled at a constant idle speed. This indicates that the MIL is
working properly.
The warning light il luminates when there is a malfunction in the
engine electronic system. Contact your authorized Audi dealer and
have the malfunction corrected.
An improperly closed fuel filler cap may also cause the MIL light to
illuminate
=> page 293 .
For more information => page 29. •

Applies to v ehicl es: wi th l ane ass is t
Lane assist (system is ready) /:
The indicator light shows that the system is ready to use. A warning
a lerts the driver when the vehicle drives over detected lane
boundary lines .
More information about lane assist=>
page 150. •
Applies to vehicles: with lane as sist
Lane assist (system is not ready) •
The indicator light shows that the system is turned on but unable to
send a warning .
More information about lane assist =>
page 150. •
Safety belts i
This warning/indicator light reminds you to put on y our
safety belt.
The , ff-warning /indicator light i lluminates when the ignition is
switched on to remind the driver and (on USA models only) any front
passenger to put on the safety belt. Additionally, an acoustic
warning (gong) will also sound.
For more Information=>
page 202, "Safety belt warning light~".•
Adaptive Air Suspension ~
This warning/indicator light has the following functions :
• It illuminates for a few seconds after the ignition is turned on as
function check and then goes out.
• If the warning/indicator light illuminates or blinks continuously,
there is a system fault in the Adaptive Air Suspension . A system
Controls and equip ­
ment
In st rum ent s a nd w arnin g/indi cato r ligh ts
fault can result in limited ride comfort and low gro und clea ra n ce .
Drive safely to the nearest authorized Audi dealer or qualified work ­
shop, and have the fault corrected .
• If the warning/indicator light flashes, you should not drive the
vehic le . The flashing warning/indicator light points to an extreme
High level. A very
pronounced lifting of the vehic le (extreme High
level) can resu lt, for example, when a heavy load is removed from
the vehicle. As soon as the level has returned to normal, the
warning/indicator light stops flashing, and you can drive away .
• If the warning/indicator light flashes in conjunction wit h the ~
warning/indicator light, you should not drive off immediate ly in
order to prevent damage to the underbody . The two warning/indi ­
cator lights flashing together points to an extreme Low level. A very
pronounced lowering of the vehicle (extreme Low level) can result,
for examp le, from a heavy load. As soon as the level has returned to
normal, the warning/indicator lights stop flashing, and you can
drive away.
0 Note
If the warning/indicator light flashes in conjunction with the~
warning/indicator light, you should not drive the vehic le because
low -lying vehic le parts can botto m out as you drive over uneven
ground and be damaged as a result. •
Adaptive Air Suspension ~
This warning/indicator light has the following functions :
• I t illuminates for a few seconds after the ignition is turned on as
function check and then goes out.
• I t comes on for approxima tely 15 seconds as a wa rning of
redu ced gr ound cle ara nce , if the dynamic mode is activated and if
the ignition is switched on=>
page 783, "Chassis contro ls" .
• If the warning/indicator light flashes in conjunction with the
~
warning/indicator light, you shou ld not d rive the vehicle immedi -._
I • •

Instruments and warning/indicator lights
ately in order to prevent damage to the underbody. The two
warning/indicator lights flashing together points to an extreme Low
level. A very
pronounced lowering of the vehicle (extreme Low level)
can result, for example, from a heavy load. As soon as the level has
returned to normal , the warning/indicator lights stop flashing, and
you can drive away.
0 Note
If the warning/indicator light flashes in conjunction with the
warning/indicator light, you should not drive the vehicle because
low -lying vehicle parts can bottom out as you drive over uneven
ground and be damaged as a result.•
High beam ~D
The ~Dwarning/indicator light illuminates when the high beams are
on or when you use the headlight flasher. For more information
about using the high beams, see:::::,
page 74. •
Cruise control
CRUISE (USA models) lvf (Canada models)
The warning/indicator light illuminates when the cruise control is
activated. •
Anti-lock brake system (ABS )
, (USA models ) / (Canada models)
This warning/indicator light monitors the ABS and the
electronic differential lock (EDL).
The warning/indicator light will come on for a few seconds when the
ignition is switched on . The light will go out after an automatic
check sequence is completed.
There is a malfunction in the ABS when:
• The warning/indicator light does not illuminate when you switch
on the ignition .
• The warning/indicator light does not go out after a few seconds.
• The warning/indicator light illuminates while driving.
The brake system will still respond even without the assistance of
the ABS system. See your authorized Audi dealer as soon as
possible to restore full braking performance.
For more information
regarding the ABS=>
page 262.
The ABS warning light and the brake warning light come on
together. The ABS will not work and you will notice a change in
braking response and performance.
Malfunction in the brake system
If the brake warning light=> page 23 and the ABS warning illuminate
together there may be a malfunction in the ABS, and there may also
be a malfunction in the brake system itself=>& .
In the event of a
malfunction in the brake system the warning/indi ­
cator light
BRAKE (USA models)/ ((j) (Canada models) in the instrument
cluster flashes. By pressing the [
CHECK] button, you can bring up a
driver message which explains the malfunction in more detail.
Please note =>
page 32.
Malfunction in the electronic differential lock (EDL)
The EDL works together with the ABS. The ABS warning light will
come on if there is a malfunction in the EDL system=>
page 259. See
your authorized Audi dealer as soon as possible.
& WARNING
• If the -. (USA models)/ ..,, (Canada models) warning light
does not go out, or if it comes on while driving, the ABS system is
not working properly. The vehicle can then be stopped only with
the standard brakes (without ABS). You will not have the protec­
tion ABS provides. Contact your Audi dealer as soon as possible. _,,

& WARNING (continu ed )
• USA model s: If the BRAKE warnin g light and the warning
light come on together , the rear wheel s could lo ck up first under
hard braking . Rear wheel lock-up can cause loss of veh icle control
and an accident . Have your vehicle repaired immediately by your
authorized Audi dealer or a qualified workshop . Drive slowly and
avoid sudden , hard brake applications .
• Canada models : If the brake warning light
«D> and the ABS
warning light
le come on together , the rear wheels could lock up
first under hard braking . Rear wheel lock-up can cause loss of
vehicle control and an accident. Have your vehicle repaired imme ­
diately by your authorized Aud i dealer or a qual ified wor kshop .
Drive slowly and avoid sudden , hard brake applications. •
Electromechanical parking brake
~[ (USA models)
/(®) (Canada models)
T he warnin g/in dic at or l ight mo nitors the ele ctromechan ­
i c a l pa rkin g brak e.
With the parking brake applied and the ignition turned on, the
warning/indicator light ill uminates . After the ignition ha s been
turned off, the warning/indicator light continues to i lluminate for
about 30 seconds . If the parking brake is applied with the ignition
turned o ff, t he wa rn ing/ ind icato r light illum inates fo r ab out 30
seconds.
Th e war nin g/ind ica tor light w ill g o out when th e p arking b rak e is
released .
I f the warning/indicator light f lashes continuou sly after applying the
par king brake, brakin g force is not suffic ie n t to prevent t he vehic le
from rol ling unintentional ly. Please note the fo llowing:
• I f the s lo p e of th e ground is too s teep to park t he veh icle, the
addit ional drive message appears Caution: Vehicle parked too
steep.
Controls and equip ­
ment
Instruments and warning /indi cator lights
• I n the event of a parking brake ma lfunction, the yellow symbo l
appea rs in the instru ment c luster display a nd the d rive r message
Parking brake malfunction! is displayed . Have the malfunction
r epai red a s soo n as possible by a qualified Audi dealership .•
Brake system BRAKE (USA models) / (CD) (Canada
models )
The warning/indi cator li ght flashes if b rake fluid level is
l o w, i f th ere is an ABS s ystem m alfunctio n or a pa rk ing
br ake malfun ction .
The light i lluminates when the ignition is turned on. It goes out after
t he eng ine has been sta rted. Th is indica tes that the brake warning
li g ht i s function ing properl y.
If the brake warning light does not light up when the engine is
cranking , there may be a malfunction in the electrical system . In this
case , contact your Audi dealer.
If the brake syste m wa rn ing/indicator ligh t flashes, there is a b rake
system mal funct ion . By pr essin g the
I CHECK ] button, you can bring
u p a d rive r mes sage which e xplains t he m alf un ction in mo re de tail
=> page
32.
If the ABS fai ls, the ABS warning/indicator light , (USA
mo dels)/ .J (C an ada mode ls) flas hes toge ther wi th th e br ake sys tem
warning/ indicato r light=> &.
When the l igh t co mes on, an a udible warning signal is a lso given .
& WARNING
• USA models: If the BRAKE warning light and the~ warning
light come on together , the rear wheels could lo ck up first under
hard braking . Rear wheel lock -up can cause loss of vehicle control
and an accident . Have your vehicle repaired immediately by your
authorized Audi dealer or a qualified workshop. Drive slowly and
avoid sudden , hard brake applications.
~
I • •

Instruments and warning/indicator lights
& WARNING (continued)
• Canada models: If the brake warning light «D> and the ABS
warning light come on together, the rear wheels could lock up
first under hard braking . Rear wheel lock-up can cause loss of
vehicle control and an accident. Have your vehicle repaired imme­ diately by your authorized Audi dealer or a qualified workshop .
Drive slowly and avoid sudden, hard brake applications.
• If the brake warning/indicator light does not go out after a few
seconds and the parking brake released, or lights up while you are
driving, the fluid level in the brake fluid reservoir is too low . If you
believe that it is safe to do so, proceed immediately at low speed
to the nearest authorized Audi dealer or qualified repair facility
and have the brake system inspected.
• Always keep in mind that after several brake applications, you
will need greater pressure on the brake pedal to stop your vehicle. Do not rely on strained brakes to respond with maximum stopping
power in critical situations. You must allow for increased braking
distances . The extra distance used up by fading brakes could lead
to an accident. •

Digital speedometer
Fig. 11 Display: Digital
speedometer
Current speed appears in the display . Speed is shown in 1 mph
measures (USA models) or 1 km/h measures (Canada models).
You can switch the display from miles to kilometers and vice versa
via the MMI. •
Open door or trunk lid warning
The pictogram alerts you when doors or the rear lid have
been left open.
., ., N N t1. ;g
Fig . 12 Display: open
door or rear
lid
warning
With the ignition switched on, the open door or rear lid warning illu ­
minates when at least
one door or the hood or the trunk lid is not
Con tro ls and eq uip­
ment
Driver information display
closed. The symbol also shows you which door(s) or lid is not
closed.
In the illustration=> fig. 12 it is the driver's door, the left rear door
and the rear lid. As soon as all the doors, the hood, the rear lid and
the fuel filler cap are properly closed, the door and rear lid warning
turns off and the Driver Information System functions selected are
displayed again .•
Defective light bulb warning
The defective light bulb warning tells you when a vehicle
light bulb has become defective.
Fig. 13 Display: defec­
tive light bulb warning
The defective light bulb warning monitors the function of the light
bulbs . If a defective light bulb is detected, or if a light bulb has
burned out, a yellow symbol appears as well as a pictogram in which
the defective light bulb is shown=> fig. 13.
Defective brake light
(USA models)/ (Canada models)
If the symbol illuminates, a brake light has failed. The burned out
light is shown in the pictogram.
Defective bulb L.
If this symbol 'illuminates, a turn signal (front or rear), a headlight,
the backup light, a fog light or a rear fog light has failed . _,,
Vehicle care I I Technical data

& WARNING
Your vehicle must not be towed in the event of a malfunction in the electronic steering column lock because it cannot be steered due
to the locked steering . If it is towed with the steering locked, there
is the risk of an accident. •
Ignition lock malfunction ~
A malfunction in the ignition lock must be repaired imme­
diately.
If the .Pe symbol in the display blinks, there is a malfunction
in the electronic ignition lock. An additional driver message
can also be displayed by pressing the [ CHECK] button:
Ignition lock defective. Contact workshop!
-Do not turn the engine off.
- Drive immediately to an authorized Audi dealer to have
the malfunction corrected.
If there is a malfunction in the electronic ignition lock, the ignition
cannot be turned off. Drive immediately to an authorized Audi
dealer to have the cause of the malfunction corrected.
On vehicles wi th Advanced Key *, the engine should not be switched
off using the
I STOP I button because the engine cannot be started
again after the ignition is switched off .•
Controls and equip ­
ment
Driver information display
Yellow symbols
A yellow symbol means WARNING.
Fig. 19 Display: low
fuel level warning
(priority 2)
Yellow symbols indicate a priority 2 malfunction -Warning!
When a yellow warning symbol appears , one warn ing tone sounds.
A driver message appears as well to explain the malfunction in more
detail. The driver warning goes out after about 5 s econds, but it can
be brought up again at any time by pressing the I CHECK I button.
Check the displayed function as soon as possible . If more than one
priority 2 malfunction is detected, all symbols will appear one after
the other for about 2 seconds .
Y ellow symbols mean :
Advanced Key* Key not in vehicle
l[usA models:
Defective brake light
Canada models:
Defective brake light
]f Defective light bulb
Light/rain sensor defective
I • •
~ page 128
~ page27
-
~ page27
~ page27
-
~ page36