2008.5 Peugeot 1007 Dag display
[x] Cancel search: displayPage 20 of 194
1
23
L a c k o f o i l
If "OIL" fl a s h e s a n d t h e s e r v i c e w a r n -
ing light comes on, accompanied by
an audible signal and a message on
the multifunction display, this indicates
a lack of oil which could damage the
engine.
I f t h e l a c k o f o i l i s c o n fi r m e d b y a
check using the dipstick, it is essential
that the level is topped up.
E n g i n e o i l l e v e l i n d i c a t o r
When the ignition is switched on, the
engine oil level is indicated for approxi-
mately 5 seconds after the service indi-
cator display.
O i l l e v e l g a u g e f a u l t
Check the oil level using the dipstick.
If "OIL --" fl a s h e s , t h i s i n d i c a t e s a
malfunction of the engine oil level
gauge.
Consult a PEUGEOT dealer.
INSTRUMENT PANEL DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator
- total distance recorder (total and trip distances).
The level read on the dipstick
will only be correct if the
vehicle is on level ground
and the engine has been off
for more than 15 minutes.
O i l l e v e l c o r r e c t
N o t e : the trip distance is displayed
for thirty seconds, when the ignition is
switched off, on opening and closing
the driver's door as well as on locking
the vehicle.
It also displays the "2 Tronic" gear-
box positions and operating modes
selected, as well as the information
relating to the cruise control or speed
limiter when one of these functions is
active.
Page 21 of 194
1
24
S e r v i c e i n d i c a t o r
This indicates when the next service
is due in accordance with the manu-
facturer's servicing schedule.
The point at which the next service
is due is calculated from the last indi-
cator zero reset. It is determined by
two parameters:
- the distance travelled,
- the time which has elapsed since the last service.
Operation
When the ignition is switched on, the
spanner symbolising the servicing
operations comes on; the distance
recorder display indicates the number
of miles [kilometres] (rounded off)
remaining until the next service.
E x a m p l e : 4,800 miles/km remain before
t h e n e x t s e r v i c e . F o r fi v e s e c o n d s a f t e r
the ignition is switched on, the display
indicates: 10 seconds after the ignition was
switched on, the distance recorder
resumes its normal operation and
the display indicates the total or trip
distance.
10 seconds after the ignition was
switched on, the distance recorder
resumes its normal operation and the
spanner remains lit.
It indicates that a service must be
carried out soon. The display indi-
cates the total or trip distance. T h e s e r v i c e i s o v e r d u e .
T h e s p a n n e r fl a s h e s f o r 5 s e c o n d s
each time the ignition is switched on.
10 seconds after the ignition was
switched on, the distance recorder
resumes its normal operation and the
spanner remains lit.
The display indicates the total or trip
distance.
The distance remaining before the
next service may be weighted by the
time factor, depending on the user's
driving habits.
The spanner may also come on if
more than two years have elapsed
since the last service.
T h e d i s t a n c e r e m a i n i n g t o
t h e n e x t s e r v i c e i s l e s s t h a n
5 0 0 m i l e s / 1 , 0 0 0 k m .
E x a m p l e : 400 miles/900 km remain
before the next service.
For 5 seconds after the ignition is
switched on, the display indicates:
E x a m p l e : the service is overdue by
300 miles/km, your vehicle must be
serviced as soon as possible.
For 5 seconds after the ignition is
switched on, the display indicates:
Page 22 of 194
1
25
S e r v i c e i n d i c a t o r z e r o r e - s e t
Your PEUGEOT dealer carries out
this operation after each service.
However, if you carry out the service
yourself, the re-set procedure is as
follows:
Switch off the ignition,
Press and hold the trip recorder
re-set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears. T o t a l / t r i p d i s t a n c e r e c o r d e r
B r i e fl y p r e s s i n g t h e b u t t o n a l t e r n a t e s
between the total and trip distance
displays.
To reset the trip distance recorder to
zero, when it is displayed press the
button until zeros appear.
L i g h t i n g r h e o s t a t
With the lights on, press the button to
vary the intensity of the lighting of the
instruments and controls. When the
lighting reaches the required bright-
ness, release the button.
After this operation, if you
wish to disconnect the bat-
tery, lock the vehicle and
w a i t f o r a t l e a s t fi v e m i n u t e s ,
otherwise the zero re-set will not be
registered.
Page 24 of 194
1
27
TRIP COMPUTER
Press the button, located at the
end of the w i p e r s s t a l k , to dis-
play the various items of trip
computer data in succession. The trip computer data is the
following:
System which provides current infor-
mation concerning the route travelled
(range, consumption, ...).
Press the control for more than two
seconds to reset the distance trav-
elled, the average consumption
and the average speed to zero.
M o n o c h r o m e d i s p l a y A
Z e r o r e s e t
D a t a d i s p l a y s - the range,
- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.
The next press then returns you
to the normal display.
Page 26 of 194
1
29
D i s t a n c e r e m a i n i n g t o b e t r a v e l l e d
(km or miles)
This is the distance remaining to be t r a v e l l e d t o t h e fi n a l d e s t i n a t i o n . I t is either calculated instantly by the navigation system if guidance is acti-vated, or entered by the user.
If the distance is not entered, dashes are displayed in place of the digits.
A v e r a g e s p e e d
(km/h or mph)
This is the average speed cal-culated since the last trip com-puter zero reset (ignition on).
Range
(km or miles)
This indicates the number of miles (or kilometres) which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) travelled.
C u r r e n t c o n s u m p t i o n
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed over the last few seconds.
A v e r a g e c o n s u m p t i o n
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed since the last trip compu-ter zero reset.
D i s t a n c e t r a v e l l e d
(km or miles)
This indicates the distance travelled since the last trip computer zero reset.
A f e w d e f i n i t i o n s …
When the range falls below 20 miles (30 km), dashes are displayed. After fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l , t h e range is recalculated and is displayed when it exceeds 60 miles (100 km).
If dashes are displayed con-tinuously while driving in place of the digits, contact a PEUGEOT dealer.
This function is only displayed from 20 mph (30km/h).
T h i s fi g u r e m a y i n c r e a s e f o l -lowing a change of driving style or relief, resulting in a s i g n i fi c a n t c h a n g e i n t h e c u r -rent consumption.
Page 27 of 194
1
30
D i s p l a y C
Press the "MENU" button to gain access to the general menu.
Press the arrows, then the "OK"button to select the " T r i p c o m - p u t e r " menu.
On the " T r i p c o m p u t e r " menu, select one of the following appli-cations:
W a r n i n g s l o g
This summarises the active warning messages, displaying them in suc-cession on the multifunction display.
S t a t u s o f t h e f u n c t i o n s
This summarises the active or inactive status of the functions present on the vehicle.
E n t e r t h e d i s t a n c e t o t h e d e s t i n a t i o n
This enables you to enter an approxi- m a t e v a l u e f o r t h e d i s t a n c e t o t h e fi n a l destination.
"TRIP COMPUTER" MENU
System which provides general infor-mation concerning the status of certain equipment with which your vehicle is equipped, such as the warnings log, the status of the functions...
"DIAGNOSTICS" MENU
On the " D i a g n o s t i c s " menu, select one of the following appli-cations:
C o l o u r d i s p l a y
Press the "MENU" button to gain access to the general menu.
Turn the dial and press it to select the " D i a g n o s t i c s " menu.
Page 28 of 194
2
31
MONOCHROME DISPLAY A (without WIP Sound)
Presentation
This displays the following information:
- the time,
- the date,
- the outside temperature (this fl a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- t h e s t a t u s o f t h e a c c e s s e s ( d o o r s , b o o t , . . . ) ,
- the warning messages (e.g.: " A n t i p o l l u t i o n s y s t e m f a u l t y " ) o r
information messages
( e . g . : " A u t o l i g h t s o n " ) ,
d i s p l a y e d t e m p o r a r i l y , c a n b e
c l e a r e d b y p r e s s i n g t h e "ESC"
button,
- t h e t r i p c o m p u t e r ( s e e c o r r e s p o n d i n g s e c t i o n ) . Parameter configuration
T h e r e a r e t h r e e d i s p l a y c o n t r o l b u t -
tons:
-
"ESC" to abandon the operation
in progress,
- "MENU" t o s c r o l l t h r o u g h t h e
menus or sub-menus,
- "OK" t o s e l e c t t h e m e n u o r s u b -
menu required. General menu
Press the
"MENU" b u t t o n t o s c r o l l
through the various menus of the
general menu:
- v e h i c l e c o n fi g u r a t i o n ,
- options,
- display settings,
- languages,
- units.
Press the "OK" b u t t o n t o s e l e c t t h e
menu required.
Page 29 of 194
2
32
V e h i c l e c o n fi g u r a t i o n
O n c e t h e " V e h i c l e c o n fi g u r a t i o n "
m e n u h a s b e e n s e l e c t e d , y o u c a n
a c t i v a t e o r d e a c t i v a t e t h e f o l l o w i n g
equipment:
- w i p e r l i n k e d w i t h r e v e r s e g e a r ,
- "follow-me-home" lighting. Languages
O n c e t h e " L a n g u a g e s " m e n u h a s b e e n
s e l e c t e d , y o u c a n c h a n g e t h e l a n g u a g e
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
B r a s i l , D e u t s c h , E n g l i s h , E s p a n o l ) .
Display settings
O n c e t h e " D i s p l a y s e t t i n g s " m e n u
h a s b e e n s e l e c t e d , y o u c a n g a i n a c -
c e s s t o t h e f o l l o w i n g s e t t i n g s :
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Options
O n c e t h e " O p t i o n s " m e n u h a s b e e n
s e l e c t e d , y o u c a n s t a r t d i a g n o s t i c s o f
t h e s t a t u s o f t h e e q u i p m e n t ( a c t i v e ,
n o t a c t i v e , f a u l t y ) . O n c e y o u h a v e s e l e c t e d a s e t t i n g ,
press the
"OK" b u t t o n t o c h a n g e i t s
value.
W a i t f o r a p p r o x i m a t e l y t e n s e c -
o n d s w i t h o u t a n y a c t i o n t o a l l o w t h e
c h a n g e d d a t a t o b e r e c o r d e d o r p r e s s
the "ESC" b u t t o n t o c a n c e l .
The display then returns to the normal
display. Units
O n c e t h e " U n i t s " m e n u h a s b e e n s e -
l e c t e d , y o u c a n c h a n g e t h e u n i t s o f
the following parameters:
- t e m p e r a t u r e ( ° C o r ° F ) ,
- f u e l c o n s u m p t i o n ( l / 1 0 0 , m p g o r
k m / l ) .
For safety reasons, it is im-
p e r a t i v e t h a t c o n fi g u r a t i o n o f
t h e m u l t i f u n c t i o n d i s p l a y s b y
t h e d r i v e r t a k e s p l a c e w h e n
stationary.