AUTOMATIC TRANSMISSION
Fault finding - Fault Finding Chart23A
23A -136V5 MR-372-J84-23A100$928.mif
SIEMENS TA2005
Vdiag No.: 14-18
ALP7 Oil present under vehicle
NOTESOnly refer to Customer complaints after carrying out a complete fault finding
procedure with the diagnostic tool and the conformity check.
Check the colour of the oil under the vehicle to determine the source of the leak (automatic transmission fluid is
red).
Clean the engine and gearbox.
Check the oil levels in the engine and gearbox.
Top up if necessary (see MR 364 Mechanical, 23A, Automatic transmission, Filling - levels (for Mégane II)
and MR 370 Mechanical, 23A, Automatic transmission, Oil change (for Scénic II)).
If there is no gearbox leak, look for a leak in the engine compartment.
If the leak is from the gearbox:
–Locate the source of the leak and carry out the necessary repairs.
–Replace any faulty parts.
–Check the oil level.
AFTER REPAIRCarry out a road test followed by a complete check with the diagnostic tool.
DP0TA2005_V14_ALP07/DP0TA2005_V18_ALP07
AUTOMATIC TRANSMISSION
Fault finding - Tests23A
23A -138V5 MR-372-J84-23A100$986.mif
SIEMENS TA2005
Vdiag No.: 14-18
TEST 1 Checking the gearbox output lever clearance
Normal lever:
Check the clearance in the ball detent of fixed 1st gear. There must be little or no lever clearance in this position.
Inverted lever:
Check the clearance in the ball detent of fixed 1st gear. There must be little or no lever clearance in this position.
DP0TA2005_V14_TEST01/DP0TA2005_V18_TEST01
