SE-78
SEAT
Revision: 2006 November2007 350Z
4. Remove bolts on the under side of seat cushion.
5. Remove hog rings from under seat cushion frame.
6. Disconnect harness connector from seat cushion heater unit.
7. After removing the seat cushion trim and pad, remove the hog rings to separate the trim and pad.
NOTE:
Seat cushion heater unit is stitched into seat cushion trim. It cannot be separated.
Assembly
Assemble in the reverse order of disassembly.
SEAT CUSHION TRIM AND PAD (MANUAL SEAT FOR COUPE)
CAUTION:
Do not disassemble front passenger seat cushion assembly.
Always replace as an assembly.
For front passenger seat service parts, refer to the service part catalogue.
Disassembly
1. Pull up tabs of reclining lever from inside. Slide knob forward to
remove.
PIIA7833E
PIIA7834E
PIIA1161E