M/T OIL
MT-9
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: 2006 November2007 350Z
M/T OILPFP:KLD20
Changing M/T OilNCS0000T
DRAINING
1. Start the engine and warm up the transmission unit sufficiently.
2. After stopping engine, remove filler plug and drain plug to drain oil.
3. Replace gasket on drain plug with new one. Screw drain plug into transmission case, and tighten to the
specified torque. Refer to MT-22, "
Case Components" .
CAUTION:
Do not reuse gasket.
FILLING
1. Fill new oil into the transmission to the level of the filler plug mounting hole.
2. Replace gasket on filler plug with new one. Screw filler plug into transmission case, and tighten to the
specified torque. Refer to MT-22, "
Case Components" .
CAUTION:
Do not reuse gasket.
Checking M/T OilNCS0000U
OIL LEAKAGE AND OIL LEVEL
Check if oil is leaking from transmission or around it.
Check oil level from filler plug mounting hole as shown in the fig-
ure.
CAUTION:
Never start engine while checking oil level.
When screwing in filler plug with a new gasket, first screw into
the transmission by hand, then tighten to the specified torque.
Refer to MT-22, "
Case Components" .
CAUTION:
Do not reuse gasket.Oil grade and viscosity : Refer to MA-11, "
Fluids and Lubricants" .
Oil capacity
: Approx. 2.93 (6-1/4 US pt, 5-1/8 lmp pt)
PCIB0268E
SERVICE DATA AND SPECIFICATIONS (SDS)
MT-61
D
E
F
G
H
I
J
K
L
MA
B
MT
Revision: 2006 November2007 350Z
SERVICE DATA AND SPECIFICATIONS (SDS)PFP:00030
General SpecificationsNCS00012
Transmission modelFS6R31A
Number of speed6
Shift pattern
Synchromesh typeWarner
Gear ratio1st 3.794
2nd 2.324
3rd 1.624
4th 1.271
5th 1.000
6th 0.794
Reverse 3.446
Main gear
(Number of teeth)Drive 26
1st 37
2nd 34
3rd 33
4th 31
6th 31
Reverse 42
Counter gear
(Number of teeth)Drive 32
1st 12
2nd 18
3rd 25
4th 30
6th 48
Reverse 15
Reverse idler gear (Number of teeth)26
Oil capacity (Approx.)
(US pt, Imp pt)2.93 (6-1/4, 5-1/8)
RemarksReverse synchronizer Installed
Double cone synchronizer 4th
Triple cone synchronizer 1st, 2nd and 3rd
SCIA0955E
