MT-28
TRANSMISSION ASSEMBLY
Revision: 2006 November2007 350Z
3. Remove check select spring and check ball from the rear exten-
sion.
4. Remove retaining pin using a pin punch, and remove control
rod.
5. Remove Park/Neutral position (PNP) switch, plunger and back-
up lamp switch from the rear extension.
6. Remove control bracket mounting bolts. Then remove check
shift pin and control bracket as one unit from the rear extension.
7. Remove right and left return spring plugs. Then remove return
springs and return spring plungers from the rear extension.
CAUTION:
Return spring and return spring plunger have different
lengths for right and left sides. Identify right and left side
and then store.
8. Remove bracket mounting bolts. Then remove brackets from the
rear extension.
9. Remove rear oil seal from the rear extension using an oil seal
puller.
CAUTION:
Be careful not to damage rear extension.
PCIB0599E
SCIA1437E
SCIA1440E
SCIA1441E
Tool number : KV381054S0 (J-34286)
PCIB0196E
