FRONT DOOR GLASS AND REGULATOR
GW-51
C
D
E
F
G
H
J
K
L
MA
B
GW
Revision: 2006 November2007 350Z
FRONT DOOR GLASS AND REGULATORPFP:80300
Removal and InstallationNIS00057
DOOR GLASS
Removal
1. Remove front door finisher. Refer to EI-33, "DOOR FINISHER" .
2. Operate power window main switch to raise/lower door window
until glass mounting bolts can be seen.
3. Remove the glass mounting bolts.
4. While holding door window, raise it at rear end to pull the glass out of sash toward outside of door.
Installation
Install in the reverse order of removal.
1. Door glass 2. Regulator assembly 3. Power window motor
4. Module assembly 5. Glass stabilizer 6. Glass mounting bolt
7. Regulator mounting bolt 8. Regulator mounting nut 9. Module mounting bolt
10. Power window motor mounting bolt
PIIB0823E
PIIA2161E
