2007 NISSAN 350Z steering

AV-1
AUDIO VISUAL, NAVIGATION & TELEPHONE SYS-
TEM
K ELECTRICAL
CONTENTS
C
D
E
F
G
H
I
J
L
M
SECTION AV
A
B
AV
Revision: 2006 November2007 350Z
AUDIO VISUAL, NAVIGATION & TELEPHONE SYSTEM
PRECAUTIONS .......................................................... 3
Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” .................................................................. 3
Precautions for Battery Service ................................ 3
PREPARATION ........................................................... 4
Commercial Service Tools ........................................ 4
AUDIO ......................................................................... 5
System Description .................................................. 5
BASE SYSTEM ..................................................... 5
BOSE SYSTEM (COUPE MODELS) .................... 5
BOSE SYSTEM (ROADSTER MODELS) ............. 6
Component Parts Location ....................................... 8
Schematic / Base System ........................................ 9
Wiring Diagram — AUDIO — / Base System ......... 10
Schematic / BOSE System .................................... 13
Wiring Diagram — AUDIO — / BOSE System
(Coupe Models) ...................................................... 14
Wiring Diagram — AUDIO — / BOSE System
(Roadster Models) .................................................. 23
Terminals and Reference Value for Audio Unit / Base
System ................................................................... 30
Terminals and Reference Value for Audio Unit /
BOSE System ........................................................ 32
Terminals and Reference Value for BOSE Speaker
Amp. ....................................................................... 35
Terminals and Reference Value for Woofer Amp. ... 37
Terminals and Reference Value for Satellite Radio
Tuner ...................................................................... 38
Trouble Diagnosis .................................................. 39
Power Supply Circuit Inspection ............................ 41
Steering Switch Does Not Operate ........................ 42
AudioPilot® Does Not Work ................................... 44
Removal and Installation of Audio Unit (Base sys-
tem) ........................................................................ 46
REMOVAL ........................................................... 46
INSTALLATION ................................................... 46
Locking CD Auto Changer Mechanism (Audio unit
of BOSE system) .................................................... 46
DAMPER LOCK PROCEDURE .......................... 46Removal and Installation of Audio Unit (BOSE sys-
tem) ........................................................................ 47
REMOVAL ........................................................... 47
INSTALLATION ................................................... 47
Removal and Installation of Door Speaker ............. 47
REMOVAL ........................................................... 47
INSTALLATION ................................................... 47
Removal and Installation of Rear Speaker ............. 48
REMOVAL ........................................................... 48
INSTALLATION ................................................... 48
Removal and Installation of Tweeter ...................... 48
REMOVAL ........................................................... 48
INSTALLATION ................................................... 48
Removal and Installation of Woofer and Woofer
Amp. (BOSE System) ............................................. 49
REMOVAL ........................................................... 49
INSTALLATION ................................................... 49
Removal and Installation of BOSE Speaker Amp. ... 50
REMOVAL ........................................................... 50
INSTALLATION ................................................... 50
Removal and Installation of Microphone ................ 50
REMOVAL ........................................................... 50
INSTALLATION ................................................... 50
Removal and Installation of Satellite Radio Tuner ... 51
REMOVAL ........................................................... 51
INSTALLATION ................................................... 51
Removal and Installation of Satellite Radio Antenna ... 51
REMOVAL ........................................................... 51
INSTALLATION ................................................... 51
ANTENNA ................................................................. 52
System Description ................................................. 52
Wiring Diagram — M/ANT — ................................. 53
Location of Antenna ................................................ 54
Removal and Installation of Antenna Amp. ............ 55
REMOVAL ........................................................... 55
INSTALLATION ................................................... 55
Removal and Installation of Antenna ...................... 55
REMOVAL ........................................................... 55
INSTALLATION ................................................... 55
Removal and Installation of Satellite Radio Antenna ... 56

AV-2Revision: 2006 November2007 350Z NAVIGATION SYSTEM ............................................. 57
System Description ................................................. 57
LOCATION DETECTION PRINCIPLE ................. 57
MAP-MATCHING ................................................. 58
GPS (GLOBAL POSITIONING SYSTEM) ........... 59
Component Description .......................................... 60
NAVI CONTROL UNIT ........................................ 60
GPS ANTENNA ................................................... 60
DISPLAY UNIT .................................................... 61
NAVI SWITCH ..................................................... 61
Component Parts Location ..................................... 61
Schematic ............................................................... 62
Wiring Diagram — NAVI — ..................................... 63
Wiring Diagram — COMM — ................................. 67
Terminals and Reference Value for NAVI Control
Unit ......................................................................... 69
Terminals and Reference Value for Display Unit .... 71
Terminals and Reference Value for NAVI Switch .... 73
Special Note for Trouble Diagnosis ........................ 74
On Board Self-Diagnosis Function ......................... 74
DESCRIPTION .................................................... 74
DIAGNOSIS ITEM ............................................... 74
Self Diagnosis Mode ............................................... 74
OPERATION PROCEDURE ................................ 74
SELF-DIAGNOSIS RESULT ............................... 76
Confirmation/Adjustment Mode .............................. 77
OPERATION PROCEDURE ................................ 77
DISPLAY DIAGNOSIS ......................................... 78
VEHICLE SIGNALS ............................................. 78
NAVIGATION ....................................................... 79
ERROR HISTORY ............................................... 80
DELETE UNIT CONNECTION LOG ................... 83
All Images Are Not Displayed ................................. 84
Navigation System Is Not Operated by NAVI Switch ... 87
Tint Is Strange for The RGB Image ........................ 89
RGB Image Is Rolling ............................................. 91
Voice Guidance Is Not Heard ................................. 92
Vehicle Mark Is Not Displayed Properly ................. 94
Example of Symptoms Possible No Malfunction .... 95BASIC OPERATIONS .......................................... 95
VEHICLE MARKS ................................................ 95
DVD-ROM ............................................................ 96
ROUTE CALCULATION AND VISUAL GUID-
ANCE ................................................................... 96
VOICE GUIDANCE .............................................. 97
Removal and Installation of NAVI Control Unit ........ 98
REMOVAL ............................................................ 98
INSTALLATION .................................................... 98
Removal and Installation of GPS Antenna .............. 98
REMOVAL ............................................................ 98
INSTALLATION .................................................... 98
Removal and Installation of NAVI Switch ................ 99
REMOVAL ............................................................ 99
INSTALLATION .................................................... 99
Removal and Installation of Display Unit ................ 99
REMOVAL ............................................................ 99
INSTALLATION .................................................... 99
TELEPHONE ...........................................................100
System Description ...............................................100
HANDS-FREE PHONE SYSTEM ......................100
Component Parts Location ...................................101
Location of TEL Antenna ......................................102
Schematic .............................................................103
Wiring Diagram — H/PHONE — ...........................104
Terminals and Reference Value for TEL Adapter
Unit ........................................................................110
Self-Diagnosis Function ........................................ 111
DIAGNOSIS FUNCTION OPERATION PROCE-
DURE .................................................................112
ERROR ITEM (ERROR NAME) .........................113
VEHICLE SPEED SIGNAL ................................113
MICROPHONE TEST ........................................113
Symptom Chart .....................................................114
Component Inspection ..........................................115
STEERING SWITCH .........................................115
Removal and Installation of Telephone Microphone .115
REMOVAL ..........................................................115
INSTALLATION ..................................................115

AUDIO
AV-5
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2006 November2007 350Z
AUDIOPFP:28111
System DescriptionNKS000C7
BASE SYSTEM
For Audio System operation information, refer to Owner's Manual.
Power is supplied at all times

through 15 A fuse [No. 37, located in the fuse and fusible link box]

to audio unit terminal 6.
With the ignition switch in the ACC or ON position, power is supplied

through 10 A fuse [No. 6, located in the fuse block (J/B)]

to audio unit terminal 10.
Ground is supplied through the case of the audio unit.
When audio switch is pressed, audio signals are supplied

through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16

to terminals 1 and 2 of driver door speaker and passenger door speaker

to terminals 1 and 2 of rear speaker LH and RH

to terminals 1 and 2 of tweeter (driver side) and tweeter (passenger side).
When one of steering switch is pressed to volume up, seek up, or mode ON, resistance in steering switch cir-
cuit changes depending on which button is pressed.
When one of steering switch is pressed to volume down, seek down, or power ON, resistance in steering
switch circuit changes depending on which button is pressed.
BOSE SYSTEM (COUPE MODELS)
CD auto changer (built into audio unit) operation is controlled by audio unit.
Refer to owner's manual for the system operation.
Power is supplied at all times

through 15 A fuse [No. 37, located in the fuse and fusible link box]

to audio unit terminal 6

to BOSE speaker amp. terminal 11

to satellite radio tuner terminal 32,

through 15 A fuse [No. 17, located in the fuse block (J/B)]

to woofer amp. terminal 8.
With the ignition switch in the ACC or ON position, power is supplied

through 10 A fuse [No. 6, located in the fuse block (J/B)]

to audio unit terminal 10

to satellite radio tuner terminal 36,

through audio unit terminal 12

to BOSE speaker amp. terminal 41,

through BOSE speaker amp. terminal 32

to woofer amp. terminal 6.
Ground is supplied through the case of the audio unit.
Ground is also supplied

to BOSE speaker amp. terminal 27

to woofer amp. terminal 7

through body grounds B5, B6, D105 and T14.
When audio switch is pressed, audio signals are supplied

through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16

to BOSE speaker amp. terminals 33, 34, 35, 36, 37, 38, 39 and 40.
Audio signals are amplified by the BOSE speaker amp.
The amplified audio signals are supplied

through BOSE speaker amp. terminals 12, 19, 20, 21, 22, 23, 24, 25, 26 and 28

to terminals 1 and 2 of driver door speaker and passenger door speaker

AV-6
AUDIO
Revision: 2006 November2007 350Z

to terminals 1 and 2 of rear speaker LH and RH

to terminals 1 and 2 of tweeter (driver side) and tweeter (passenger side)

to terminals 1 and 2 of woofer amp.
Audio signals are amplified by the woofer amp.
The amplified audio signals are supplied

through woofer amp. terminals 3 and 4

to terminals 1 and 2 of woofer.
When one of steering switch is pressed to volume up, seek up, or mode ON, resistance in steering switch cir-
cuit changes depending on which button is pressed.
When one of steering switch is pressed to volume down, seek down, or power ON, resistance in steering
switch circuit changes depending on which button is pressed.
BOSE SYSTEM (ROADSTER MODELS)
CD auto changer (built into audio unit) operation is controlled by audio unit.
Refer to owner's manual for the system operation.
Power is supplied at all times

through 15 A fuse [No. 37, located in the fuse and fusible link box]

to audio unit terminal 6

to BOSE speaker amp. terminal 11,

through 15 A fuse [No. 17, located in the fuse block (J/B)]

to woofer amp. terminal 8.
With the ignition switch in the ACC or ON position, power is supplied

through 10 A fuse [No. 6, located in the fuse block (J/B)]

to audio unit terminal 10,

through audio unit terminal 12

to BOSE speaker amp. terminal 41,

through BOSE speaker amp. terminal 32

to woofer amp. terminal 6.
Ground is supplied through the case of the audio unit.
Ground is also supplied

to BOSE speaker amp. terminal 27

to woofer amp. terminal 7

through body grounds B5, B6 and T14.
When audio switch is pressed, audio signals are supplied

through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16

to BOSE speaker amp. terminals 33, 34, 35, 36, 37, 38, 39 and 40.
Audio signals are amplified by the BOSE speaker amp.
The amplified audio signals are supplied

through BOSE speaker amp. terminals 12, 19, 20, 21, 22, 23, 24, 25, 26 and 28

to terminals 1 and 2 of driver door speaker and passenger door speaker

to terminals 1 and 2 of rear speaker LH and RH

to terminals 1 and 2 of tweeter (driver side) and tweeter (passenger side)

to terminals 1 and 2 of woofer amp.
Audio signals are amplified by the woofer amp.
The amplified audio signals are supplied

through woofer amp. terminals 3 and 4

to terminals 1 and 2 of woofer.
When one of steering switch is pressed to volume up, seek up, or mode ON, resistance in steering switch cir-
cuit changes depending on which button is pressed.
When one of steering switch is pressed to volume down, seek down, or power ON, resistance in steering
switch circuit changes depending on which button is pressed.

AUDIO
AV-7
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2006 November2007 350Z
AudioPilot® System
AudioPilot® is the sound improving system that picks up by a microphone under the steering any noises or the
sound of music coming into the vehicle, and that uses the BOSE speaker amp. to revise the frequency feature
of music in real time in response to the frequency feature of the noise while driving and listening to music.

If low frequency area noise from vehicle is loud, it adjusts low frequency element of music to be bigger
than vehicle noise.

If high frequency area noise from vehicle is loud, it adjusts high frequency element of music to be bigger
than vehicle noise.

If vehicle noise is smaller than the setting volume, correction is not performed.

AUDIO
AV-39
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2006 November2007 350Z
Trouble DiagnosisNKS002ED

The majority of the audio malfunctions are the result of outside causes (bad CD, electromagnetic interfer-
ence, etc.). Check the symptoms below to diagnose the malfunction.

The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunction-
ing. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and
operation of each piece of electrical equipment, and then determine the cause.

Refer to "SERVICE BULLETIN NTB04-119" for the diagnosis of satellite radio.
NOTE:
Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise
from trains and other sources. It is not a malfunction.

Fading noise: This noise occurs because of variations in the field strength in a narrow range due to moun-
tains or buildings blocking the signal.
Symptom Possible malfunction location
Audio system does not work properly.

Audio unit power supply circuit

Audio unit
No sound can be heard from all speakers.
Base system

Audio unit
BOSE system

BOSE speaker amp. power supply and ground circuit

BOSE speaker amp. ON signal circuit

Audio unit

BOSE speaker amp.
No sound can be heard from one or several speakers.
Base system

Audio signal circuit between audio unit and speaker

Speaker

Tweeter

Audio unit
BOSE system

Audio signal circuit between audio unit and BOSE speaker amp.

Audio signal circuit between BOSE speaker amp. and speaker

Speaker

Tweeter

Audio unit

BOSE speaker amp.
No sound can be heard from woofer.

Woofer amp. power supply and ground circuit

Woofer amp. ON signal circuit

Audio signal circuit between BOSE speaker amp. and woofer

Audio signal circuit between woofer amp. and woofer

Woofer

Woofer amp.

BOSE speaker amp.
No sound can be heard from radio or noise is caught.

Antenna amp. ON signal circuit

Antenna feeder

Antenna

Antenna amp.

Audio unit
None of the steering switch operations work

TEL adapter unit control signal 1 circuit

Steering switch signal ground circuit

AV-42
AUDIO
Revision: 2006 November2007 350Z
3. CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BOSE speaker amp. and woofer amp. connectors.
3. Check continuity between BOSE speaker amp. harness connec-
tor T6 terminal 27 and ground.
4. Check continuity between woofer amp. harness connector B32
terminal 7 and ground.
OK or NG
OK >> INSPECTION END
NG >> Repair harness or connector.
Steering Switch Does Not OperateNKS002EE
1. CHECK STEERING SWITCH RESISTANCE
1. Turn ignition switch OFF.
2. Disconnect combination switch (spiral cable) connector.
3. Check resistance between steering switch harness connector
M203 terminals.
OK or NG
OK >> GO TO 2.
NG >> Replace steering switch.
2. CHECK SPIRAL CABLE
1. Disconnect combination switch (spiral cable) connector.
2. Check continuity between combination switch (spiral cable) con-
nector (A) terminals 16, 17, 20 and connector (B) terminals 32,
31, 24.
OK or NG
OK >> GO TO 3.
NG >> Replace spiral cable.27 – Ground : Continuity should exist.
7 – Ground : Continuity should exist.
SKIA8745E
Terminal Signal name Condition Resistance (Ω)
16
17Power Press and hold POWER switch. Approx. 0
Seek downPress and hold SEEK DOWN
switch.Approx. 165
Vo l u m e d o wnPress and hold VOLUME DOWN
switch.Approx. 652
20Mode Press and hold MODE switch. Approx. 0
Seek up Press and hold SEEK UP switch. Approx. 165
Vo l u m e u pPress and hold VOLUME UP
switch.Approx. 652
SKIB7339E
16 – 32 : Continuity should exist.
17 – 31 : Continuity should exist.
20 – 24 : Continuity should exist.
SKIB7340E

AV-50
AUDIO
Revision: 2006 November2007 350Z
Removal and Installation of BOSE Speaker Amp. NKS002BO
REMOVAL
1. Remove trunk side box. Refer to EI-39, "Removal and Installation (for Coupe Models)" , or EI-49,
"Removal and Installation (for Roadstar Models)" .
2. Remove luggage floor carpet and spare tire cover (Coupe models), or trunk floor carpet and spare tire
cover (Roadster models). Refer to EI-39, "
Removal and Installation (for Coupe Models)" , or EI-49,
"Removal and Installation (for Roadstar Models)" .
3. Remove nuts (3), and remove BOSE speaker amp. from trunk
room floor.
4. Remove bolts (4), and remove bracket.
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation of MicrophoneNKS002BP
REMOVAL
1. Remove steering column lower cover. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws (3), and remove microphone.
INSTALLATION
Installation is the reverse order of removal.
SKIA8758E
PKIA1775E
PKIA1785E