2007 MITSUBISHI LANCER EVOLUTION mirror

EXTERIOR -Outside Mirror51-23
OUTSIDE MIRROR
SPECIAL TOOL
ToolNumberNameApplication
MB990784Ornament removerRemoval of power remote control outside
mirror switch
OUTSIDE MIRROR
REMOVAL AND INSTALLATION
123 4
6 7
1
Claw
A
A
Section A - A5
AA
2
7.4±1.4 N·m
Outside mirror removal steps
1. Cover
2. Delta inner cover
3. Outside mirror assembly
4. Outside mirror
A
A"5. MirrorRemote control outside mirror switch
removal steps
6. Instrument panel ornament (Refer to
GROUP 52A - Instrument Panel.)
7. Remote control mirror switch

EXTERIOR -Outside MirrorEXTERIOR -Outside Mirror51-24
REMOVAL SERVICE POINT
AA"MIRROR REMOVAL
Tilt the mirror upward, insert the flat-tipped screw driver
wrapped around with the protection tape between the notch
located behind the mirror and pivot plate, and pry off the
mirror.
INSPECTIONS
REMOTE CONTROLLED MIRROR ASSEMBLY CHECK

Battery connection terminalOperation of mirror
123
Up
Down
Right
Left
THERMAL PRINTED WIRE FUNCTION CHECK
For vehicles with thermal printed wires, check that there is
continuity between terminals (1) and (4).
Section A – A
Notch Flat-tipped
screw driver
Pivot plate
AMirrorFlat-tipped screw driverA

EXTERIOR -Outside Mirror51-25
CONTINUITY INSPECTION OF POWER REMOTE
CONTROL MIRROR SWITCH
SwitchSwitch positionTerminal numberp
LeftRight
169101112369
Mirror adjustment switchUp
Down
Left
Right