2007 Mercury Mariner Hybrid Owner's Manuals

Page 97 of 336

Mercury Mariner Hybrid 2007  Owners Manuals Warnings Status
Liftgate ajar Warning returns after the ignition key
is turned from LOCK to RUN.
Service emission sys
Check fuel cap
Low brake fluid
Service brake system
Regen disabled
Performance red

Page 98 of 336

Mercury Mariner Hybrid 2007  Owners Manuals HIGH ENGINE TEMPERATURE.Displayed when the engine coolant
is overheating. Engine coolant temperature warning lamp will illuminate
indicating coolant temperature is high. Stop the vehicle as soon as sa

Page 99 of 336

Mercury Mariner Hybrid 2007  Owners Manuals CHECK FUEL CAP.Displayed when the fuel filler cap is not properly
installed. Check the fuel filler cap for proper installation. Refer toFuel
filler capin theMaintenance and Specificationschapter.
SERV

Page 100 of 336

Mercury Mariner Hybrid 2007  Owners Manuals SERVICE 4X4.Displayed when the 4X4 is not operating properly. If the
warning stays on or continues to come on, contact your authorized
dealer as soon as possible.
TURN SIGNAL ON (if equipped).Displaye

Page 101 of 336

Mercury Mariner Hybrid 2007  Owners Manuals 3. Press and hold the SET control
for 2 seconds to display “OIL
CHANGE SET TO 100%”.
Note:This feature is based on
distance traveled or time elapsed
since last reset. You must reset this
feature e

Page 102 of 336

Mercury Mariner Hybrid 2007  Owners Manuals Make sure that the liftgate door and/or window are closed to
prevent exhaust fumes from being drawn into the vehicle.
Exhaust fumes contain carbon monoxide which can injure your lungs
and cause drowsi

Page 103 of 336

Mercury Mariner Hybrid 2007  Owners Manuals LUGGAGE RACK
Your vehicle may be equipped with a
roof rack. The maximum load for
the roof rack is 100 lbs (44 kg),
evenly distributed on the cross-bars.
If it is not possible to evenly
distribute the

Page 104 of 336

Mercury Mariner Hybrid 2007  Owners Manuals 3. Use a long, flat object to depress
the tongue in the endcaps on both
sides of the cross-bar.
4. Slide the cross-bar assembly off
the end of the rail.
To reinstall the cross-bar assembly (if equippe