Page 5807 of 6020
CAB 10-49
REMOVAL AND INSTALLATION
Regular Cab Model
Removal Steps
1. Sill plate
2. Dash side trim cover
▲ 3. Front pillar trim cover
▲ 4. Rear end trim cover
▲ 5. Body side rear lower trim cover
6. Door finisher
▲ 7. Tongue side seat belt
▲ 8. Body side rear upper trim cover
Installation Steps
8. Body side rear upper trim cover
▲ 7. Tongue side seat belt
6. Door finisher
5. Body side rear lower trim cover
▲ 4. Rear end trim cover
3. Front pillar trim assembly
2. Dash side trim cover
1. Sill plate
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
Page 5808 of 6020
10-50 CAB
RTW 710SH000501
Important Operations - Removal
3. Front Pillar Trim Cover • Turn up the finisher and pry the trim cover clips free
from the body panel.
Remove the trim cover by pulling upward on the lowe
r
part of it.
4. Rear End Trim Cover
• Pry the trim cover clips free from the body panel, and
slide the trim cover upward to remove it.
5. Body Side Rear Lower Trim Cover
• Pry the trim cover clips free from the body panel.
7. Tongue Side Seat Belt
1) Pull out the adjuster knob.
RTW 5A0SH000501
2) Remove the through ring anchor cover and remove the
seat belt upper anchor bolt.
• Insert the blade of an ordinary screwdriver into the gap
between the D-ring back surface and the cover.
Carefully pry the D-ring latches open. Remove the cover.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5809 of 6020
CAB 10-51
8. Body Side Rear Upper Trim Cover
• Pry the trim cover clips free from the body panel.
Important Operations - Installation
7. Tongue Side Seat Belt • Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)
4. Rear End Trim Cover
• Insert the hooks on the back upper portion of the trim
cover to the body panel.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5810 of 6020
10-52 CAB
REMOVAL AND INSTALLATION
RTW 4A0MF000401
Crew Cab Model
Removal Steps
▲ 1. Front sill plate/Rear sill plate
2. Dash side trim cover
▲ 3. Front pillar trim cover
▲ 4. Center pillar lower trim cover
5. Front door finisher
6. Cover
▲ 7. Rear end trim cover
▲ 8. Body side rear lower trim cover
9. Rear door finisher
▲ 10. Front tongue side seat belt
▲ 11. Center pillar upper trim cover
12. Rear tongue side seat belt
▲ 13. Body side rear upper trim cover
Installation Steps
13. Body side rear upper trim cover
▲ 12. Rear tongue side seat belt
11. Center pillar upper trim cover
▲ 10. Front tongue side seat belt
9 Rear door finisher
8. Body side rear lower trim cover
▲ 7. Rear end trim cover
6. Cover
5. Front door finisher
4. Center pillar lower trim cover
3. Front pillar trim cover
2. Dash side trim cover
1. Front sill plate/Rear sill plate
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5812 of 6020
10-54 CAB
10. Front Tongue Side Seat Belt
1) Pull out the adjuster knob.
RTW 3A0SH000301
2) Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
11. Center Pillar Upper Trim Cover
• Pry the trim cover clips free from the body panel.
13. Body Side Rear Upper Trim Cover
• Pry the trim cover clips free from the body panel.
Important Operations - Installation
12. Rear Tongue Side Seat Belt • Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5813 of 6020
CAB 10-55
10. Front Tongue Side Seat Belt
• Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1/30)
7. Rear End Trim Cover
• Insert the hooks on the back upper portion of trim cove
r
to the body panel.
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5830 of 6020
10-72 CAB
FRONT SEAT
REMOVAL AND INSTALLATION
RTW 3A0MF000301
Removal Steps
▲ 1. Front cover
2. Rear cover
3. Bolt
▲ 4. Seat assembly
▲ 5. Buckle side seat belt/center seat belt
6. Seat adjuster
Installation Steps
6. Seat adjuster
▲ 5. Buckle side seat belt/center seat belt
4. Seat assembly
▲ 3. Bolt
2. Rear cover
1. Front cover
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
Page 5831 of 6020
CAB 10-73
Important Operations - Removal
1. Front Cover • W hile pushing the cover downward, pull it.
4. Seat Assembly • Disconnect the seat belt warning harness connecto
r
(Driver’s side only).
RUW 7A0SH000201
5. Buckle Side Seat Belt/Center Seat Belt
• Remove the seat belt fixing screw and the warning
harness connector clip (Bucket seat model).
• Remove the seat belt fixing screws and the warning
harness connector clip (Bench seat model).
Important Operations – Installation
5. Buckle Side Seat Belt/Center Seat Belt • Tighten the seat belt fixing screws to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
3. Bolt: Seat Assembly to Floor Panel
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
40 (4.1 / 30)
BACK TO CHAPTER INDEX TO MODEL INDEXISUZU KB P190 2007
